journal article·2026-06-29

Achieving 1300 Wh/L in Anode‐Free Li Batteries With Integrated 3D Printed Cathode and Electrolyte

Qingxu Zhang, Jiucong Liu, Chenyang Wang, Yu Cao, Chao Ma, Huiqiao Li, Xizheng Liu

Publisher page

Abstract

ABSTRACT Anode‐free Li batteries employing ultra‐thick cathodes offer exceptional volumetric energy density, yet are hindered by side reactions and limited Li reservoirs. This study develops an anode‐free pouch cell using a 3D‐printed ultra‐thick cathode (120 mg cm ‒2 ) and a dual‐salt/dual‐solvent electrolyte. The electrolyte forms an anion‐rich solvation structure, fostering an elastic‐plastic solid‐electrolyte interphase layer that enables highly reversible Li plating/stripping on bare Cu current collectors and stable prolonged cycling, even under low temperature conditions. The configuration delivers energy densities of 1,308 Wh L ‒1 and 424 Wh kg ‒1 , alongside a remarkable areal capacity of 19.11 mAh cm ‒2 . This work establishes a scalable and cost‐effective technical route for high‐energy, safe anode‐free batteries, which is expected to expedite their commercialization in electric aviation and the fast‐growing low‐altitude economy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Flexible Optoelectronic Materials and Technology School of Optoelectronic Materials & Technology Ministry of Education Jianghan University Wuhan P. R. China

Institute for New Energy Materials and Low‐Carbon Technologies School of Materials Science and Engineering Tianjin University of Technology Tianjin P. R. China

State Key Laboratory of Materials Processing and Die & Mould Technology School of Materials Science and Engineering Huazhong University of Science and Technology Wuhan P. R. China

Funding

National Natural Science Foundation of China

References (57)

Show source-provided references
1. 10.1038/natrevmats.2016.1310.1038/natrevmats.2016.13 ↗
2. Diagnosing and Correcting Anode‐Free Cell Failure via Electrolyte and Morphological Analysis10.1038/s41560-020-0668-8 ↗
3. 10.1002/adfm.20160235310.1002/adfm.201602353 ↗
4. 10.1038/s41560‐021‐00852‐310.1038/s41560‐021‐00852‐3 ↗
5. 10.1038/s41565‐025‐01935‐y10.1038/s41565‐025‐01935‐y ↗
6. 10.1016/j.ensm.2020.07.00410.1016/j.ensm.2020.07.004 ↗
7. 10.1016/j.joule.2025.10222610.1016/j.joule.2025.102226 ↗
8. 10.1038/s41586‐025‐09565‐z10.1038/s41586‐025‐09565‐z ↗
9. 10.1002/adma.20251590610.1002/adma.202515906 ↗
10. Anode‐Free Full Cells: A Pathway to High‐Energy Density Lithium‐Metal Batteries10.1002/aenm.202000804 ↗
11. 10.1021/acsenergylett.3c0216310.1021/acsenergylett.3c02163 ↗
12. 10.1002/anie.20230497810.1002/anie.202304978 ↗
13. 10.1038/s41467‐022‐31507‐w10.1038/s41467‐022‐31507‐w ↗
14. 10.1038/s41560‐019‐0338‐x10.1038/s41560‐019‐0338‐x ↗
15. 10.1016/j.mattod.2025.11.01710.1016/j.mattod.2025.11.017 ↗
16. 10.1039/D2EE03840D10.1039/D2EE03840D ↗
17. 10.1038/s44359‐024‐00018‐w10.1038/s44359‐024‐00018‐w ↗
18. 10.1016/j.mattod.2022.03.01410.1016/j.mattod.2022.03.014 ↗
19. 10.1016/j.ensm.2025.10429110.1016/j.ensm.2025.104291 ↗
20. 10.1126/sciadv.adr429210.1126/sciadv.adr4292 ↗
21. 10.1038/s41560‐021‐00910‐w10.1038/s41560‐021‐00910‐w ↗
22. 10.1038/s41570‐025‐00722‐610.1038/s41570‐025‐00722‐6 ↗
23. 10.1021/jacs.5c0956210.1021/jacs.5c09562 ↗
24. 10.1038/s44359‐025‐00120‐710.1038/s44359‐025‐00120‐7 ↗
25. 10.1002/aenm.20250188310.1002/aenm.202501883 ↗
26. 10.1038/s41560‐023‐01252‐510.1038/s41560‐023‐01252‐5 ↗
27. 10.1038/s41560‐020‐0634‐510.1038/s41560‐020‐0634‐5 ↗
28. 10.1039/D3EE01599H10.1039/D3EE01599H ↗
29. 10.1038/s41467‐025‐62163‐510.1038/s41467‐025‐62163‐5 ↗
30. 10.1038/s41563‐025‐02339‐y10.1038/s41563‐025‐02339‐y ↗
31. 10.1002/adma.20240111410.1002/adma.202401114 ↗
32. Long Cycle Life and Dendrite‐Free Lithium Morphology in Anode‐Free Lithium Pouch Cells Enabled by a Dual‐Salt Liquid Electrolyte10.1038/s41560-019-0428-9 ↗
33. 10.1038/s41560‐024‐01621‐810.1038/s41560‐024‐01621‐8 ↗
34. 10.1038/s41560‐025‐01803‐y10.1038/s41560‐025‐01803‐y ↗
35. 10.1038/s41586‐025‐09675‐810.1038/s41586‐025‐09675‐8 ↗
36. 10.1039/D2EE00981A10.1039/D2EE00981A ↗
37. 10.1002/adma.20221149810.1002/adma.202211498 ↗
38. 10.1002/adfm.20210490910.1002/adfm.202104909 ↗
39. 10.1002/aenm.20230226110.1002/aenm.202302261 ↗
40. Epitaxial Induced Plating Current‐Collector Lasting Lifespan of Anode‐Free Lithium Metal Battery10.1002/aenm.202003709 ↗
41. 10.1002/adfm.20240717910.1002/adfm.202407179 ↗
42. 10.1002/adfm.20241300410.1002/adfm.202413004 ↗
43. 10.1149/1945‐7111/ac39e310.1149/1945‐7111/ac39e3 ↗
44. 10.1021/acs.nanolett.4c0572110.1021/acs.nanolett.4c05721 ↗
45. An Electron‐deficient Carbon Current Collector for Anode‐free Li‐metal Batteries10.1038/s41467-021-25848-1 ↗
46. 10.1038/s41467‐023‐36853‐x10.1038/s41467‐023‐36853‐x ↗
47. N, S‐Rich SEI Derived from Continuously‐Releasing Additive for Anode‐Free Lithium‐Metal Batteries in Commercial Carbonate Electrolyte10.1002/smll.202410486 ↗
48. 10.1039/D4EE02989E10.1039/D4EE02989E ↗
49. 10.1002/smll.20240816410.1002/smll.202408164 ↗
50. 10.1002/adma.20230538610.1002/adma.202305386 ↗
51. 10.1002/adfm.20221106210.1002/adfm.202211062 ↗
52. 10.1002/adma.20211032310.1002/adma.202110323 ↗
53. 10.1039/D3TA04060G10.1039/D3TA04060G ↗
54. 10.1039/D2SC06772B10.1039/D2SC06772B ↗
55. 10.1021/acs.nanolett.4c0184410.1021/acs.nanolett.4c01844 ↗
56. 10.1038/s41560‐021‐00839‐010.1038/s41560‐021‐00839‐0 ↗
57. 10.1038/s41560‐020‐0575‐z10.1038/s41560‐020‐0575‐z ↗