journal article·2026-07-16

Size‐Dependent Trade‐off between Sulfur Catalysis and Sulfide Electrolyte Decomposition for Room‐Temperature Ultrahigh‐Rate All‐Solid‐State Li–S Batteries

Junjie Wang, Chuannan Geng, Jiangshan Qi, Haotian Yang, Shuoyi Chen, Fangbing Li, Mingyang Jiang, Ying Liu, Luwei Hu, Qiang Li, Jiwei Shi, Li Wang, Wei Lv, Quan‐Hong Yang

Publisher page

Abstract

ABSTRACT All‐solid‐state lithium‐sulfur batteries (ASSLSBs) hold immense promise for next‐generation safe and high‐energy storage, yet their power capability is fundamentally limited by sluggish solid‐state sulfur redox kinetics. While catalysis is effective in accelerating these reactions, we reveal for the first time that under overlapping potentials, such catalytic acceleration inevitably triggers severe parasitic decomposition of sulfide solid‐state electrolytes (SSEs), a critical yet overlooked bottleneck that disrupts Li + transport and limits high‐rate performance. To decouple efficient sulfur conversion from interfacial degradation, we devise a spatially selective catalyst architecture. Precisely sized cobalt clusters are confined within an ultra‐microporous carbon host. This design ensures intimate sulfur‐catalyst contact for rapid conversion while physically isolating the catalytic surfaces from the bulk SSE, thereby suppressing its catalytic decomposition. Consequently, the continuous Li + transport network is preserved. The resulting ASSLSB achieves an unprecedented room‐temperature rate capability, stably cycling at an ultrahigh current density of 25.0 mA cm −2 (15 C) for over 15,000 cycles. This work provides a general design principle for reconciling catalysis with interfacial stability in high‐power solid‐state batteries.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Nanoyang Group, Tianjin Key Laboratory of Advanced Carbon and Electrochemical Energy Storage, School of Chemical Engineering and Technology, National Industry‐Education Platform for Energy Storage, and Collaborative Innovation Center of Chemical Science and Engineering (Tianjin) Tianjin University Tianjin China

Shenzhen Geim Graphene Center, Engineering Laboratory for Functionalized Carbon Materials, Tsinghua Shenzhen International Graduate School Tsinghua University Shenzhen China

Haihe Laboratory of Sustainable Chemical Transformations Tianjin China

Centre of Energy Storage for Extreme Environments Frontier Energy Technologies Institute Shenzhen University of Advanced Technology Shenzhen China

Funding

National Key Research and Development Program of China · National Natural Science Foundation of China · Shenzhen Science and Technology Innovation Program · Natural Science Foundation of Tianjin Municipality

References (49)

Show source-provided references
1. Overcoming the Conversion Reaction Limitation at Three‐phase Interfaces Using Mixed Conductors towards Energy‐dense Solid‐state Li–S Batteries10.1038/s41563-024-02057-x ↗
2. Healable and Conductive Sulfur Iodide for Solid‐state Li–S Batteries10.1038/s41586-024-07101-z ↗
3. All‐solid‐state Lithium–sulfur Batteries through a Reaction Engineering Lens10.1038/s44286-024-00079-5 ↗
4. All‐solid‐state Li–S Batteries with Fast Solid–solid Sulfur Reaction10.1038/s41586-024-08298-9 ↗
5. Bridging the Gap between Academic Research and Industrial Development in Advanced all‐solid‐state Lithium–sulfur Batteries10.1039/D3CS00439B ↗
6. Catalytic Solder Fuses Solid‐Solid Interfaces for all‐Solid‐State Lithium‐Sulfur Batteries10.1002/adma.202507308 ↗
7. Coordination Reconstruction Enhanced Synergistic Nonradical Oxidation Pathways in Cobalt Single‐Atom Catalysts for Sustained Pollutant Destruction10.1002/anie.202508330 ↗
8. A Prototype of Dual‐ion Conductor for all‐solid‐state Lithium Batteries10.1126/sciadv.adj8171 ↗
9. Reliable Sulfur Cathode Design for all‐Solid‐State Lithium Metal Batteries Based on Sulfide Electrolytes10.1002/aenm.202500061 ↗
10. A Universal Solid Reaction Enabling Nanosized Li2S in an Amorphous Matrix for all‐Solid‐State Li‐S Batteries
11. Mechanically Induced Bridged Interlayer Enabling Highly Reversible all‐Solid‐State Sulfur Cathodes10.1002/adma.202513336 ↗
12. High‐performance all‐solid‐state Li2S Batteries Using an Interfacial Redox Mediator10.1039/D2EE03297J ↗
13. Manipulating Li2S2/Li2S Mixed Discharge Products of all‐solid‐state Lithium Sulfur Batteries for Improved Cycle Life10.1038/s41467-023-42109-5 ↗
14. Halide Chemistry Boosts all‐Solid‐State Li‐S Batteries10.1002/adma.202501844 ↗
15. In Situ Solid Electrolyte Ionic Pathway Formation in High Sulfur Loading Cathodes for High‐Performance All‐Solid‐State Lithium–Sulfur Batteries10.1002/aenm.202500363 ↗
16. Tailored Redox‐Active Catholytes Enabling High‐Rate and High‐Loading all‐Solid‐State Lithium‐Sulfur Batteries10.1002/adma.202513204 ↗
17. Revitalizing Interphase in all‐solid‐state Li Metal Batteries by Electrophile Reduction10.1038/s41563-024-02064-y ↗
18. Solid Catholyte with Regulated Interphase Redox for all‐Solid‐State Lithium‐Sulfur Batteries10.1002/adma.202417171 ↗
19. Regulating p‐Band Center of Sulfur in Li‐Argyrodite to Stabilize Dual Solid–Solid Interface for Robust All‐Solid‐State Lithium–Sulfur Battery10.1002/adfm.202412144 ↗
20. Clarifying the Relationship between Redox Activity and Electrochemical Stability in Solid Electrolytes10.1038/s41563-019-0576-0 ↗
21. Long‐Life and High‐Loading all‐Solid‐State Li–S Batteries Enabled by Acetylene Black with Dispersed Co‐N 4 as Single Atom Catalyst10.1002/aenm.202300767 ↗
22. Exploiting Deep Sulfur Conversion by Tandem Catalysis for all‐solid‐state Lithium–sulfur Batteries10.1093/nsr/nwaf525 ↗
23. Synergistic Regulation of Single‐Atom Catalysis and Conductive Enhancement in all‐Solid‐State Li–S Batteries10.1021/acsenergylett.5c01856 ↗
24. Integrating Solid Interfaces for Catalysis in all‐solid‐state Lithium–sulfur Batteries10.1039/D4EE05845C ↗
25. MOF‐Derived Carbon‐Based Materials for Energy‐Related Applications10.1002/adma.202413658 ↗
26. Single Cobalt Atoms with Precise N‐Coordination as Superior Oxygen Reduction Reaction Catalysts10.1002/anie.201604802 ↗
27. Confining Iodine into Metal‐Organic Framework Derived Metal‐Nitrogen‐Carbon for Long‐Life Aqueous Zinc‐Iodine Batteries10.1002/adma.202408317 ↗
28. Heterostructure ZnSe‐CoSe2 Embedded with Yolk‐shell Conductive Dodecahedral as Two‐in‐one Hosts for Cathode and Anode Protection of Lithium–Sulfur Full Batteries10.1016/j.ensm.2022.02.010 ↗
29. Tailoring Short‐chain Sulfur Molecules to Drive Redox Dynamics for Sulfur‐based Aqueous Battery10.1073/pnas.2307646120 ↗
30. Quasi‐Solid Sulfur Conversion for Energetic All‐Solid‐State Na−S Battery10.1002/anie.202402274 ↗
31. Catalytic Solid‐State Sulfur Conversion Confined in Micropores toward Superhigh Coulombic Efficiency Lithium‐Sulfur Batteries10.1002/aenm.202400249 ↗
32. Confined Tandem Catalytic Quasi‐solid Sulfur Reversible Conversion for all‐solid‐state Na–S Batteries10.1039/D4EE01750A ↗
33. Single Atom‐Particle Tandem Catalysis Enables Enhanced Desolvation Kinetics for Low‐Temperature Li‐S Batteries10.1002/adfm.202501496 ↗
34. Construction of High‐Density Binuclear Site Catalysts from Double Framework Interfaces at the Cooling Stage10.1002/anie.202313029 ↗
35. Synergistic Pincer Catalysis by Closely Adjacent Single Atoms and Nanoclusters for Superior Lithium‐Sulfur Batteries10.1002/inf2.12649 ↗
36. Deactivation Mechanism and Mitigation Strategies of Single‐Atom Site Electrocatalysts10.1002/adma.202420383 ↗
37. Electronic Localization Enables Long‐Cycling Sulfides‐Based all‐Solid‐State Lithium Batteries10.1002/anie.202501411 ↗
38. Electron Redistribution Enables Redox‐Resistible Li 6 PS 5 Cl towards High‐Performance all‐Solid‐State Lithium Batteries10.1002/anie.202302655 ↗
39. Surface Halogenation Engineering for Reversible Silicon‐based Solid‐state Batteries10.1038/s41467-025-67985-x ↗
40. Chemo‐mechanical Failure Mechanisms of the Silicon Anode in Solid‐state Batteries10.1038/s41563-023-01792-x ↗
41. In Situ Constructed “Poly‐Ionic Bridges” Promoting Performances of all‐Solid‐State Lithium‐Sulfur Batteries10.1002/aenm.70792 ↗
42. Dynamic Volume Compensation Realizing Ah‐level all‐solid‐state Silicon‐sulfur Batteries10.1038/s41467-025-59224-0 ↗
43. Superior Low‐Temperature all‐Solid‐State Battery Enabled by High‐Ionic‐Conductivity and Low‐Energy‐Barrier Interface10.1021/acsnano.3c07023 ↗
44. Tailoring the Interface between Sulfur and Sulfide Solid Electrolyte for High‐Areal‐Capacity All‐Solid‐State Lithium–Sulfur Batteries10.1021/acsenergylett.3c01473 ↗
45. Chemo‑Electrochemical Tandem Catalysis Unlocking Sulfur Reaction in Practical Lithium–Sulfur Batteries10.1002/adma.202521611 ↗
46. Two‐Stage Solvation of Lithium Polysulfides in Working Lithium–Sulfur Batteries10.1021/jacs.5c01588 ↗
47. Unraveling the Coupling Effect between Cathode and Anode toward Practical Lithium–Sulfur Batteries10.1002/adma.202303610 ↗
48. Suppressing Argyrodite Oxidation by Tuning the Host Structure for High‐areal‐capacity all‐solid‐state Lithium–sulfur Batteries10.1038/s41563-025-02238-2 ↗
49. Engineering Triple‐Phase Interfaces with Hierarchical Carbon Nanocages for High‐Areal‐Capacity All‐Solid‐State Li‐S Batteries10.1002/adma.202413325 ↗