Laser‐Induced Graphenization of PDMS as Flexible Electrode for Microsupercapacitors
Source abstract
Abstract
Abstract Laser graphenization of polymeric surfaces has emerged as one of the most promising technologies to fabricate flexible electrodes. Unfortunately, despite the large number of materials suitable for laser‐induced graphene (LIG) fabrication, there is a lack of stretchable polymers, hindering the full exploitation of LIG for flexible electronics. Herein, the laser graphenization of polydimethylsiloxane (PDMS), the most exploited elastomeric substrate for flexible electronic device fabrication, is proposed for the first time. The low carbon content and the absence of aromatic structures strongly limit the graphenization process resulting in limited conduction properties. Nevertheless, by adding triethylene glycol (TEG) as carbon source into the PDMS matrix, it is possible to improve the graphenization and to reduce the sheet resistance of the written LIG by two orders of magnitude down to 130 ohm sq−1. The PDMS‐TEG material becomes a suitable candidate for flexible microsupercapacitor fabrication with specific capacitance values as high as 287 µF cm−2 and energy and power density approaching LIG‐based supercapacitors fabricated onto traditional polyimide substrates.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced Sensor and Energy Harvesting Materials · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Politecnico di Torino Dipartimento di Scienza Applicata e Tecnologia (DISAT) Corso Duca Degli Abruzzi, 24 Torino 10129 Italy
Istituto Italiano di Tecnologia Center for Sustainable Future Technologies Via Livorno 60 Torino 10140 Italy
Funding
H2020 European Research Council · European Research Council
References (31)
Show source-provided references
1. 10.1002/adma.20160142210.1002/adma.201601422 ↗
2. 10.1002/adma.20170495510.1002/adma.201704955 ↗
3. 10.1002/adma.20180107210.1002/adma.201801072 ↗
4. 10.1039/C3TC31765J10.1039/C3TC31765J ↗
5. 10.1002/adma.20170037510.1002/adma.201700375 ↗
6. 10.1002/admi.20207010010.1002/admi.202070100 ↗
7. 10.1016/j.bushor.2015.03.00810.1016/j.bushor.2015.03.008 ↗
8. 10.1007/s10853-015-9643-310.1007/s10853-015-9643-3 ↗
9. 10.1016/j.xcrp.2020.10021510.1016/j.xcrp.2020.100215 ↗
10. 10.1002/smll.20100200910.1002/smll.201002009 ↗
11. 10.1021/acs.accounts.8b0008410.1021/acs.accounts.8b00084 ↗
12. 10.1021/acsnano.7b0853910.1021/acsnano.7b08539 ↗
13. 10.1016/j.progpolymsci.2018.06.00110.1016/j.progpolymsci.2018.06.001 ↗
14. 10.1039/C4RA12934B10.1039/C4RA12934B ↗
15. 10.1038/srep0725410.1038/srep07254 ↗
16. 10.1016/j.apsusc.2015.01.23910.1016/j.apsusc.2015.01.239 ↗
17. 10.1021/acs.jpcb.5b0258110.1021/acs.jpcb.5b02581 ↗
18. 10.1039/c1lc20371a10.1039/c1lc20371a ↗
19. 10.1039/C4LC01027B10.1039/C4LC01027B ↗
20. 10.1002/smll.20170332110.1002/smll.201703321 ↗
21. 10.1021/am509087u10.1021/am509087u ↗
22. 10.1002/aenm.20160005010.1002/aenm.201600050 ↗
23. 10.1021/acsami.9b1040810.1021/acsami.9b10408 ↗
24. 10.1088/1361-6528/aa661510.1088/1361-6528/aa6615 ↗
25. 10.1038/ncomms671410.1038/ncomms6714 ↗
26. 10.1088/0964-1726/23/10/10500110.1088/0964-1726/23/10/105001 ↗
27. 10.1002/adma.20180362110.1002/adma.201803621 ↗
28. 10.1039/D0NA00133C10.1039/D0NA00133C ↗
29. 10.1016/j.ultramic.2007.06.00310.1016/j.ultramic.2007.06.003 ↗
30. 10.3390/nano807055810.3390/nano8070558 ↗
31. 10.1016/j.jpowsour.2013.04.03110.1016/j.jpowsour.2013.04.031 ↗