journal article·2023-09Open access

Glass Fiber Reinforced Acrylonitrile Butadiene Styrene Composite Gears by FDM 3D Printing

Mahdi Bodaghi, Ali Sadooghi, Mohammadreza Bakhshi, Seyed Jalal Hashemi, Kaveh Rahmani, Mehdi Keshavarz Motamedi

Advanced Materials Interfaces· Volume 10· Issue 27

Abstract

Abstract 3D printing of gears via fused deposition modeling (FDM) has been recently introduced as a low‐cost efficient manufacturing method. Different materials have been 3D printed and Acrylonitrile Butadiene Styrene (ABS) with excellent mechanical properties has been found to be promising. However, 3D printed ABS gears possess a high level of abrasion rate. This paper introduces a new class of ABS‐based gears reinforced by different amounts of milled E‐glass fibers and 3D printed by FDM with acceptable thermo‐mechanical properties and performance. A set of thermo‐mechanical tests is carried out to provide an insight into the influence of adding glass fibers on the glass transition temperature (Tg), hardness and teeth bending strength, teeth failure force, weight lost, abrasion resistance, mechanical wear, and performance of composite gears. The mechanical behaviors of driving and driven gears are examined in high and room temperatures with or without lubrication. Microstructure and gear profile analysis of 3D printed layers, worn surfaces, and fracture locations are also conducted by SEM images and profile projector. The newly developed glass fiber reinforced ABS gears reveal a high level of thermo‐mechanical performance in terms of hardness, mechanical strength, bending force, abrasion and wear resistance compared to pure 3D printed ABS gears.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Engineering School of Science and Technology Nottingham Trent University Nottingham NG11 8NS UK

Department of Mechanical Engineering Shahid Rajaee Training Teacher University Tehran 16788‐15811 Iran

Department of Mechanical Engineering Kar Higher Education Institute Qazvin 34318‐49689 Iran

Department of Mechanical Engineering Technical and Vocational University Tehran 36471‐13736 Iran

Department of Mechanical Engineering Bu‐Ali Sina University Hamadan 65178‐38695 Iran

BSA Pars Sanat knowledge‐based company R&D center Takestan Qazvin 13919‐55411 Iran

References (40)

Show source-provided references
1. Juvinall R. C. · 2020
2. 10.1016/j.matdes.2012.02.04510.1016/j.matdes.2012.02.045 ↗
3. Iba D. · Inte. Gear Conference. · 2014 · 2
4. 10.3390/polym1207152910.3390/polym12071529 ↗
5. 10.1002/admi.20170128510.1002/admi.201701285 ↗
6. 10.1002/admi.20180099610.1002/admi.201800996 ↗
7. 10.1080/17452759.2016.127449010.1080/17452759.2016.1274490 ↗
8. 10.1080/10426914.2023.217687210.1080/10426914.2023.2176872 ↗
9. 10.1080/10426914.2023.217687010.1080/10426914.2023.2176870 ↗
10. 10.1016/j.engfailanal.2022.10634010.1016/j.engfailanal.2022.106340 ↗
11. 10.1007/978-981-15-4059-2_1710.1007/978-981-15-4059-2_17 ↗
12. Zhang X. · 2014
13. D.Petrov K.Dearn D.Walton R. B.Ann Dunarea Jos Univ. Galati Fascicle IX Metallurgy and Materials Science 2011 31 5.
14. 10.1016/j.triboint.2019.10595310.1016/j.triboint.2019.105953 ↗
15. 10.1016/j.wear.2018.12.04310.1016/j.wear.2018.12.043 ↗
16. Singh A. K. · Mater. · 2018 · 5 · 8199
17. 10.15863/TAS.2019.10.78.9410.15863/TAS.2019.10.78.94 ↗
18. 10.1007/s00170-020-05270-510.1007/s00170-020-05270-5 ↗
19. Jain M. · AIP Conf. Proc. · 2019 · 1 · 2148
20. Harsha K. M. · MSEB · 2021 · 1 · 1168
21. KALANİ A. · El‐Cezeri · 2022 · 9 · 1121
22. 10.3390/polym1410206410.3390/polym14102064 ↗
23. Guadagno M. C. · Technol · 2021 · 2 · 24
24. Naikwadi S. S. · Add. Manuf. · 2018 · 5 · 563
25. Kotkar T. · Int. JS Res. Sci. Eng. · 2018 · 4 · 1389
26. 10.1016/0010-4361(73)90585-510.1016/0010-4361(73)90585-5 ↗
27. 10.1023/A:101855692377410.1023/A:1018556923774 ↗
28. 10.1007/s10973-021-10656-y10.1007/s10973-021-10656-y ↗
29. 10.1007/s42452-020-03809-510.1007/s42452-020-03809-5 ↗
30. J. D.Menczel R.Andre W.Sean Kohl V. V.Krongauz D.Lőrinczy M.Reading J.Grebowicz inThe Handbook of Differential Scanning Calorimetry Butterworth-Heinemann 2023 pp.1–189.10.1016/B978-0-12-811347-9.00005-9 ↗
31. Gill P. · JBT · 2010 · 21 · 167
32. 10.1016/j.polymer.2004.10.02610.1016/j.polymer.2004.10.026 ↗
33. 10.1177/073168440936007610.1177/0731684409360076 ↗
34. Aliheidari N. · SPIE · 2017 · 10165 · 222
35. 10.1016/j.matpr.2021.09.43310.1016/j.matpr.2021.09.433 ↗
36. F.‐C.Hsieh P.‐H.Lin H.‐P.Pan C.‐S.Yu C.‐M.Chang Y.‐C.Hu in2017 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)2017 pp.1–4.10.1109/I2MTC.2017.7969726 ↗
37. 10.1016/j.compositesb.2013.03.02310.1016/j.compositesb.2013.03.023 ↗
38. 10.1016/j.matdes.2008.05.00510.1016/j.matdes.2008.05.005 ↗
39. Shokry K. M. · World Appl. Sci. J. · 2014 · 7 · 1341
40. 10.1007/s42452-022-04950-z10.1007/s42452-022-04950-z ↗