Semi-open discrete mechanical metamaterials and application in robotics
Source abstract
Abstract
Mechanical metamaterials (MMs) are gradually noticed and studied by researchers due to their unique properties, whose practical application however is significantly restricted because traditional manufacturing methods are mainly concentrated in the micro field. Some researchers propose designing and applying mechanical metamaterials based on discrete voxels in order to reduce the gap in MMs between study and application. In particular, MIT presents four voxels that systematically summarize the discrete concept. However, the stiffness and strength of voxels are bounded because of the open-cell or closed-cell structures, which is also challenging to balance the mass and space utilization. In this paper, we integrate both structures and propose three novel semi-open voxels with anisotropy properties that enhance stiffness and strength for macro application and improve the space utilization efficiency while maintaining low mass. In addition, voxels are assembled in the robot field based on digital material concepts. Specifically, the macroscopic system is extended by multiple units or cells simulating continuous material properties. Three semi-open voxels, the unit of MMs, are proposed for the first time and split as internal and external elements to decouple complex physical properties. Besides, the Response Surface method is employed to optimize the parameters for superior mechanical performance, and then the elastic modulus between numerical simulation and bulking experiments with optimized value is compared. Further, a vehicle is assembled discretely with voxels and access to the advantage of load capacity, providing a feasible alternative to integrating MMs in robotics in the future.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Polymer composites and self-healing · Advanced Materials and Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. The mechanics of two-dimensional cellular materials
2. Novel generation of auxetic open cell foams for curved and arbitrary shapes10.1016/j.actamat.2010.10.006 ↗
3. U.D. Larsen, O. Signund, Design and fabrication of compliant micromechanisms and structures with negative Poisson’s ratio, in: Micro Electro Mechanical Systems, 1996, MEMS ’96, Proceedings. ’an Investigation of Micro Structures, Sensors, Actuators, Machines and Systems’. IEEE, the Ninth Annual International Workshop on, 1996, pp. 99–106.
4. Rotation and dilation deformation mechanisms for auxetic behaviour in the α-cristobalite tetrahedral framework structure10.1007/s002690100209 ↗
5. Ultralight metallic microlattices10.1126/science.1211649 ↗
6. A versatile, ultralight, nitrogen-doped graphene framework10.1002/ange.201206554 ↗
7. Ultra-light and scalable composite lattice materials10.1002/adem.201800213 ↗
8. Negative compressibility of 3D cellular models constructed by hinging hexagonal truss mechanism10.1002/pssb.201800297 ↗
9. 3D cellular models with negative compressibility through the wine-rack-type mechanism10.1002/pssb.201600128 ↗
10. Giant negative linear compression positively coupled to massive thermal expansion in a metal-organic framework10.1038/ncomms5337 ↗
11. Deformation mechanisms in negative Poisson’s ratio materials: structural aspects10.1007/BF01130170 ↗
12. Chiral three-dimensional lattices with tunable Poisson’s ratio10.1088/0964-1726/25/5/054005 ↗
13. Elastic properties of two novel auxetic 3D cellular structures10.1016/j.ijsolstr.2017.05.031 ↗
14. Compression spin bio-inspired arm: A conceptual model based on compression–torsion cubic mechanical metamaterials with variable cross-section10.1016/j.eml.2020.101069 ↗
15. Design and analysis of digital materials for physical 3D voxel printing10.1108/13552540910943441 ↗
16. On the practicability of pentamode mechanical metamaterials10.1063/1.4709436 ↗
17. Tailored 3D mechanical metamaterials made by dip-in direct-laser-writing optical lithography10.1002/adma.201200584 ↗
18. Cheung · 2012
19. Carney · 2015
20. Discretely assembled mechanical metamaterials10.1126/sciadv.abc9943 ↗
21. Gibson · 1997
22. Foam topology: Bending versus stretching dominated architectures10.1016/S1359-6454(00)00379-7 ↗
23. The properties of foams and lattices
24. Nanolattices: An emerging class of mechanical metamaterials10.1002/adma.201701850 ↗
25. A variational approach to the theory of the elastic behaviour of multiphase materials10.1016/0022-5096(63)90060-7 ↗
26. Overall potentials and extremal surfaces of power law or ideally plastic composites10.1016/0022-5096(93)90051-G ↗
27. 3D plate-lattices: An emerging class of low-density metamaterial exhibiting optimal isotropic stiffness
28. Plate-nanolattices at the theoretical limit of stiffness and strength
29. Reexamining the mechanical property space of three-dimensional lattice architectures10.1016/j.actamat.2017.08.052 ↗
30. Building block-based assembly of scalable metallic lattices
31. Androgynous fasteners for robotic structural assembly
32. Response surface methodology : Process and product optimization using designed experiments — clc10.2307/1270613 ↗
33. Lee · 2010
34. A comparison of three methods for selecting values of input variables in the analysis of output from a computer code
35. Montgomery · 1976
36. An experimental comparison of ordinary and universal Kriging and inverse distance weighting10.1023/A:1007586507433 ↗
37. Epidemiologic mapping using the “Kriging” method: Application to an influenza-like epidemic in France10.1093/oxfordjournals.aje.a116236 ↗
38. MOGA: multi-objective genetic algorithms
39. Materials selection in mechanical design
40. Bioinspired structural materials10.1038/nmat4089 ↗
41. Robot maintenance10.1007/978-1-4612-3148-6_9 ↗