journal article·2025-10-29Open access

Development of a body type optimized pattern library based on fit adjustment frameworks

Jiyoung Choi, Hee Eun Choi

Fashion and Textiles· Volume 12· Issue 1

Abstract

Abstract This study introduces systematic fit adjustment frameworks to improve garment fit for diverse body types, and describes the development of a body type optimized pattern library for Made-to-Measure (MTM) apparel systems. The frameworks were designed to standardize adjustments by addressing structural and detailed fit imbalances. Unlike traditional methods reliant on empirical judgment, this approach identifies key fit imbalance factors-proportion, drop, and lateral posture- through expert evaluations of a block pattern on 126 virtual 3D fit models (size 100; chest circumference 98.5–101.4 cm). Based on these evaluations, a total of 48 optimized patterns were generated. These are organized in a three-dimensional pattern matrix combining: three proportion types (P, R, T), four drop types (Y, A, B, BB), and four lateral posture types (NN, NS, SN, SS), thereby permitting precise morphological customization. Expert evaluations using 11 criteria demonstrated that optimized patterns significantly outperformed the block pattern (p < 0.001) in ease allowance, balance, and seam alignment. Subsequent real-fit validation with muslin prototypes confirmed improvements in garment balance and reductions in drag lines, gaps, and hikes, verifying the effectiveness of virtual modifications. The introduced pattern library and frameworks offer a structured foundation for integrating modular pattern systems into digital MTM platforms, facilitating scalable automation and advancing mass customization with significantly improved fit.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Shape Modeling and Analysis · Textile materials and evaluations · Fashion and Cultural Textiles

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Alptekinoğlu, A., & Örsdemir, A. (2022). Is adopting mass customization a path to environmentally sustainable fashion? Manufacturing & Service Operations Management, 24(6), 2982–3000. https://doi.org/10.1287/msom.2022.108810.1287/msom.2022.1088 ↗
2. Apeagyei, P. R. (2010). Application of 3D body scanning technology to human measurement for clothing fit. International Journal of Digital Content Technology and Its Applications, 4(7), 58–68. https://doi.org/10.4156/jdcta.vol4.issue7.610.4156/jdcta.vol4.issue7.6 ↗
3. Bahrpeyma, F., & Reichelt, D. (2022). A review of the applications of multi-agent reinforcement learning in smart factories. Frontiers in Robotics and AI, 9, Article 1027340. https://doi.org/10.3389/frobt.2022.102734010.3389/frobt.2022.1027340 ↗
4. Bao, C., Miao, Y., Gu, B., Liu, K., & Liu, Z. (2021). 3D interactive garment parametric pattern-making and linkage editing based on constrained contour lines. International Journal of Clothing Science and Technology, 33(5), 696–723. https://doi.org/10.1108/IJCST-09-2020-013710.1108/IJCST-09-2020-0137 ↗
5. Choi, J. (2024). Development of male body type matrix and body type-optimized base patterns for the MTM system. Seoul: Seoul National University.
6. Choi, K. H. (2022). 3D dynamic fashion design development using digital technology and its potential in online platforms. Fashion and Textiles, 9(1), Article 9. https://doi.org/10.1186/s40691-021-00286-110.1186/s40691-021-00286-1 ↗
7. Choi, Y. L., & Nam, Y. J. (2010). Classification of upper lateral body shapes for the apparel industry. Human Factors and Ergonomics in Manufacturing & Service Industries, 20(5), 378–390. https://doi.org/10.1002/hfm.2018810.1002/hfm.20188 ↗
8. Coltman, C. E., Brisbine, B. R., Molloy, R. H., & Steele, J. R. (2022). Effect of torso and breast characteristics on the perceived fit of body armour systems among female soldiers: Implications for body armour sizing and design. Frontiers in Sports and Active Living, 4, Article 821210. https://doi.org/10.3389/fspor.2022.82121010.3389/fspor.2022.821210 ↗
9. Gill, S. (2015). A review of research and innovation in garment sizing, prototyping and fitting. Textile Progress, 47(1), 1–85. https://doi.org/10.1080/00405167.2015.102351210.1080/00405167.2015.1023512 ↗
10. Hammad, M., Panaousis, M., Ali, H., & Khan, W. A. (2025). Textiles and apparel: adapting smart manufacturing for creativity and customization. Cham: Springer. https://doi.org/10.1007/978-3-032-00214-3_810.1007/978-3-032-00214-3_8 ↗
11. Han, M. (2025). Integrating artificial intelligence to automate pattern making for personalized garment design. International Journal of Advanced Computer Science & Applications, 16(2), 1. https://doi.org/10.14569/IJACSA.2025.016022910.14569/IJACSA.2025.0160229 ↗
12. HwangShin, S.-J., Istook, C. L., & Lee, J.-H. (2011). Various men’s body shapes and drops for developing menswear sizing systems in the United States. Han’guk Ŭiryu Hakhoe Chi. Journal of the Korean Society of Clothing & Textiles, 35(12), 1454–1465. https://doi.org/10.5850/JKSCT.2011.35.12.145410.5850/JKSCT.2011.35.12.1454 ↗
13. Isaji, A., Kim, K., & Takatera, M. (2022). Developing a basic pattern for a design based on the comparison of four basic pattern approaches. International Journal of Clothing Science and Technology, 34(4), 485–501. https://doi.org/10.1108/IJCST-03-2021-003810.1108/IJCST-03-2021-0038 ↗
14. Jeong, Y. H., & Hong, K. H. (2006). Development of 2D tight-fitting pattern from 3D scan data. Journal of the Korean Society of Clothing and Textiles, 30(1), 157–166. https://doi.org/10.5850/JKSCT.2006.30.1.15710.5850/JKSCT.2006.30.1.157 ↗
15. Jhanji, Y. (2018). Computer-aided design—garment designing and patternmaking. In R. Nayak & R. Padhye (Eds.), Automation in garment manufacturing (pp. 253–290). Woodhead Publishing.10.1016/B978-0-08-101211-6.00011-2 ↗
16. Korean Agency for Technology and Standards. (2009). Sizing systems for male adult’s garments(KS K 0050:2009). Retrieved December 5, 2016, from https://standard.go.kr/KSCI/standardIntro/getStandardSearchView.do?menuId=503&topMenuId=502&ksNo=KSK0050&tmprKsNo=KSK0050&reformNo=04
17. Korean Agency for Technology and Standards. (2021). The 8th Size Korea 3D scan & measurement technology report. Retrieved December 2, 2023, from https://sizekorea.kr/human-info/meas-report?measDegree=8
18. Kosel, G., & Rose, K. (2020). Development and usage of 3D‐modeled body shapes for 3D‐pattern making. In Proceedings of 3DBODY. Tech 2020–11th international conference and exhibition on 3D body scanning and processing technologies: November 17–18, 2020, Ascona, Switzerland. Hometrica Consulting. https://proc.3dbody.tech/abstracts/2020/2014kosel.html10.15221/20.14 ↗
19. Lee, K. E. (2017). Application of digital enterprise technology (DET) for green made-to-measure in Korean luxury fashion industry. In M. Gardetti (Ed.), Sustainable management of luxury (pp. 331–344). Springer.10.1007/978-981-10-2917-2_15 ↗
20. Lim, H., & Istook, C. L. (2012). Automatic pattern generation process for made-to-measure. Journal of Textile and Apparel, Technology and Management, 7(4), 1. https://jtatm.textiles.ncsu.edu/index.php/JTATM/article/view/2465/1789.
21. Liu, K., Wang, J., Kamalha, E., Li, V., & Zeng, X. (2017). Construction of a prediction model for body dimensions used in garment pattern making based on anthropometric data learning. The Journal of the Textile Institute, 108(12), 2107–2114. https://doi.org/10.1080/00405000.2017.131579410.1080/00405000.2017.1315794 ↗
22. Lyu, Y., Wang, Z., Ye, Q., Sun, Y., & Chao, J. (2025). Body data-driven garment pattern construction in digital fashion innovations: a review. Textile Research Journal. https://doi.org/10.1177/0040517525135280010.1177/00405175251352800 ↗
23. Muller, M., & Sohn. (2019). Patternmaking Fundamentals Menswear (2nd ed.). Ullm: Ebner Media Group GmbH & Co. KG.
24. No, Y. (2015). Development of Torso block for men in their body shape data. Seoul: Seoul National University.
25. Oh, S. Y., Chun, J. S., & Suh, D. (2006). A study of the patternmaking methods for mass customization of the men’s jacket. The Research Journal of the Costume Culture, 14(1), 40–47. https://doi.org/10.29049/rjcc.2006.14.1.4010.29049/rjcc.2006.14.1.40 ↗
26. Oliver, B. A., Bickle, M. C., & Shim, S. (1993). Profile of male made-to-measure customers: Body characteristics and purchase selection. Clothing and Textiles Research Journal, 11(2), 59–62. https://doi.org/10.1177/0887302X930110020910.1177/0887302X9301100209 ↗
27. Pritchard, C. (2013). Exploring the relevance of manual pattern cutting skills in a technological environment. https://uobrep.openrepository.com/handle/10547/294279
28. Ross, K. (2022). Artificial intelligence in fashion manufacturing: from factory operation to advisory role. In Y. A. Lee (Ed.), Leading edge technologies in fashion innovation: Product design and development process from materials to the end products to consumers (pp. 95–116). Cham: Springer International Publishing.10.1007/978-3-030-91135-5_6 ↗
29. Scott, E., & Sayem, A. (2018). Landmarking and measuring for critical body shape analysis targeting garment fit. Proceedings of 3DBODY. TECH 2018, 1, 222–235. https://doi.org/10.15221/18.22210.15221/18.222 ↗
30. Song, H. K., & Ashdown, S. P. (2012). Development of automated custom-made pants driven by body shape. Clothing and Textiles Research Journal, 30(4), 315–329. https://doi.org/10.1177/0887302X1246205810.1177/0887302X12462058 ↗
31. Su, J., Liu, G., & Xu, B. (2015). Development of individualized pattern prototype based on classification of body features. International Journal of Clothing Science and Technology, 27(6), 895–907. https://doi.org/10.1108/IJCST-11-2014-013610.1108/IJCST-11-2014-0136 ↗
32. Watanabe, K., Matsuyama, Y., & Furumatsu, Y. (2000). Three-Dimensional Analysis of Upper Torsos of Elderly Japanese Women for Clothing Design. Journal of Home Economics of Japan, 51(11), 1045–1055. https://doi.org/10.11428/jhej1987.51.104510.11428/jhej1987.51.1045 ↗
33. Yu, M., & Kim, D. E. (2020). Body shape classification of Korean middle-aged women using 3D anthropometry. Fashion and Textiles, 7(1), Article 35. https://doi.org/10.1186/s40691-020-00223-810.1186/s40691-020-00223-8 ↗