Advanced Epitaxial Lift‐Off and Transfer Procedure for the Fabrication of High‐Quality Functional Oxide Membranes
Source abstract
Abstract
Abstract In the past 5 years, the transfer of epitaxial oxide thin films has drawn a renewed interest in the scientific community. The major challenge in this technology is to minimize the appearance of extended bulk defects such as plastic deformations, cracks, and delamination, which are induced by the transfer process to a new host substrate. In this work, a procedure for the transfer of epitaxial oxide films where a rigid bond to the final host holder is obtained via a metallic Au/Ag bonding layer is presented. Here, the transfer of SrRuO3 (SRO) and SrRuO3/SrTiO3 (STO) epitaxial films grown on a water‐soluble Sr3Al2O6 sacrificial layer is reported. These epitaxial films are grown on a STO substrate and transferred onto a Si host substrate. Roughness values lower than 1nm are observed for the transferred SRO membranes. Cross‐section analysis shows straight interfaces without plastic deformation of the membranes. X‐ray diffraction rocking‐curve analysis evidences that mechanical damage is minimized and the membranes remain close to their initial quality. This procedure represents an important step forward in the development of advanced technologies for membrane transfer of epitaxial oxides and superstructures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electronic and Structural Properties of Oxides · Advanced Condensed Matter Physics · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Empa Swiss Federal Laboratories for Materials Science and Technology Überlandstrasse 129 Dübendorf CH‐8600 Switzerland
References (63)
Show source-provided references
1. Bruce D. W. · 2011
2. 10.1016/j.apsusc.2019.03.31210.1016/j.apsusc.2019.03.312 ↗
3. 10.1016/B978-1-78242-245-7.00001-410.1016/B978-1-78242-245-7.00001-4 ↗
4. 10.1103/PhysRevLett.81.301410.1103/PhysRevLett.81.3014 ↗
5. 10.1109/LED.2004.82899210.1109/LED.2004.828992 ↗
6. 10.1143/JJAP.44.621810.1143/JJAP.44.6218 ↗
7. 10.1063/1.187657710.1063/1.1876577 ↗
8. Baker R. J. · 2019
9. 10.1002/pssa.20190084010.1002/pssa.201900840 ↗
10. Francois T. · 2019 · 15
11. 10.1063/1.9894610.1063/1.98946 ↗
12. 10.1038/s41928-019-0314-210.1038/s41928-019-0314-2 ↗
13. 10.1038/ncomms1054710.1038/ncomms10547 ↗
14. 10.1063/1.12060310.1063/1.120603 ↗
15. 10.1021/acs.nanolett.5b0417610.1021/acs.nanolett.5b04176 ↗
16. 10.1063/1.12571010.1063/1.125710 ↗
17. 10.1080/1058458039025945210.1080/10584580390259452 ↗
18. 10.1038/nmat474910.1038/nmat4749 ↗
19. 10.1007/s12274-021-3782-410.1007/s12274-021-3782-4 ↗
20. 10.1038/s41528-022-00141-310.1038/s41528-022-00141-3 ↗
21. 10.1126/sciadv.aao517310.1126/sciadv.aao5173 ↗
22. 10.1038/s41586-019-1255-710.1038/s41586-019-1255-7 ↗
23. 10.1021/acs.nanolett.1c0349810.1021/acs.nanolett.1c03498 ↗
24. 10.1021/acsaelm.9b0067010.1021/acsaelm.9b00670 ↗
25. 10.1103/PhysRevMaterials.3.06080110.1103/PhysRevMaterials.3.060801 ↗
26. 10.1126/science.aax975310.1126/science.aax9753 ↗
27. 10.1063/1.512735510.1063/1.5127355 ↗
28. 10.1038/s41467-020-16912-310.1038/s41467-020-16912-3 ↗
29. 10.1016/j.tsf.2020.13781510.1016/j.tsf.2020.137815 ↗
30. 10.1002/admi.20200164310.1002/admi.202001643 ↗
31. 10.1016/j.ceramint.2021.01.21110.1016/j.ceramint.2021.01.211 ↗
32. 10.1038/s41598-021-91848-210.1038/s41598-021-91848-2 ↗
33. 10.1021/acsami.9b0473810.1021/acsami.9b04738 ↗
34. 10.1063/1.514502910.1063/1.5145029 ↗
35. 10.1002/adfm.20200349510.1002/adfm.202003495 ↗
36. 10.1007/s40820-020-00573-410.1007/s40820-020-00573-4 ↗
37. 10.1021/acsami.1c0158110.1021/acsami.1c01581 ↗
38. 10.1002/adma.20200592010.1002/adma.202005920 ↗
39. 10.1002/advs.20210217810.1002/advs.202102178 ↗
40. 10.1002/adma.20210577810.1002/adma.202105778 ↗
41. 10.1002/adfm.20200123610.1002/adfm.202001236 ↗
42. 10.1002/adfm.20190996410.1002/adfm.201909964 ↗
43. 10.1038/srep3021010.1038/srep30210 ↗
44. 10.1002/adma.20080300010.1002/adma.200803000 ↗
45. 10.1016/j.carbon.2013.01.01110.1016/j.carbon.2013.01.011 ↗
46. 10.1016/j.pmatsci.2017.07.00410.1016/j.pmatsci.2017.07.004 ↗
47. 10.3390/cryst1009073310.3390/cryst10090733 ↗
48. 10.1002/adma.20200447710.1002/adma.202004477 ↗
49. 10.1103/RevModPhys.84.25310.1103/RevModPhys.84.253 ↗
50. 10.1063/5.003858810.1063/5.0038588 ↗
51. 10.1016/j.jallcom.2011.10.09210.1016/j.jallcom.2011.10.092 ↗
52. 10.1021/acs.nanolett.1c0119410.1021/acs.nanolett.1c01194 ↗
53. 10.1063/1.499453810.1063/1.4994538 ↗
54. 10.1107/S010827019101021110.1107/S0108270191010211 ↗
55. Sr3Al2O6crystal structure: Datasheet from “pauling file multinaries edition – 2012” in Springer Materials https://materials.springer.com/isp/crystallographic/docs/sd_0376471(accessed: 2016).
56. 10.1002/admi.20210149910.1002/admi.202101499 ↗
57. 10.1016/j.jcrysgro.2008.09.04210.1016/j.jcrysgro.2008.09.042 ↗
58. 10.1088/0034-4885/59/11/00110.1088/0034-4885/59/11/001 ↗
59. 10.1063/1.35482810.1063/1.354828 ↗
60. 10.1103/PhysRevB.55.179310.1103/PhysRevB.55.1793 ↗
61. 10.1007/BF0288031710.1007/BF02880317 ↗
62. 10.3390/s2121732610.3390/s21217326 ↗
63. 10.1080/14686996.2019.159969310.1080/14686996.2019.1599693 ↗