Automatic Segmentation and 3D Printing of A-shaped Manikins using a Bounding Box and Body-feature Points
Source abstract
Abstract
Abstract A novel algorithm for 3D-printing technology was proposed to generate large-scale objects, especially A-shaped manikins or 3D human body scan data. Most of the conventional 3D printers have a finite printing volume, and it is the users’ work to convert the target object into a printable size. In this study, an automatic three-step segmentation strategy was applied to the raw manikin mesh data until the final pieces had a smaller size than the 3D printer’s maximum printing volume, which is generally called “beam length”. Human body feature point information was adopted for fashion and textile researchers to easily specify the desired cutting positions. A simple bounding box, especially orienting bounding box, and modified Boolean operator were proposed to extract the specified segments with computational stability. The proposed method was applied to graphically synthesized manikin data, and 1/8, 1/4, and 1/2 scale manikins were successfully printed, minimizing the amount of support structure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Shape Modeling and Analysis · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016). Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing. Virtual and Physical Prototyping, 11(3), 209–225. https://doi.org/10.1080/17452759.2016.120986710.1080/17452759.2016.1209867 ↗
2. Boström, O., Fredriksson, R., Håland, Y., Jakobsson, L., Krafft, M., Lövsund, P., Muser, M. H., & Svensson, M. Y. (2000). Comparison of car seats in low speed rear-end impacts using the BioRID dummy and the new neck injury criterion (NIC). Accident Analysis & Prevention, 32(2), 321–328. https://doi.org/10.1016/s0001-4575(99)00105-010.1016/s0001-4575(99)00105-0 ↗
3. Chen, X., Liu, X., Ouyang, M., Chen, J., Taiwo, O., Xia, Y., Childs, P. R., Brandon, N. P., & Wu, B. (2019). Multi-metal 4D printing with a desktop electrochemical 3D printer. Scientific reports, 9(1), 1–9. https://doi.org/10.1038/s41598-019-40774-510.1038/s41598-019-40774-5 ↗
4. Chen, X., Zhang, H., Lin, J., Hu, R., Lu, L., Huang, Q.-X., Benes, B., Cohen-Or, D., & Chen, B. (2015). Dapper: decompose-and-pack for 3D printing. ACM Transactions on Graphics, 34(6), 213:211–213:212. https://doi.org/https://doi.org/10.1145/2816795.2818087.10.1145/2816795.2818087 ↗
5. Crump, S. S. (1992). Apparatus and method for creating three-dimensional objects (US Patent No. 5,121,329). U. S. Patent and Trademark Office.
6. Deckard, C. R. (1989). Method and apparatus for producing parts by selective sintering (US Patent No. 4,863,538). U. S. Patent and Trademark Office.
7. Demir, İ, Aliaga, D. G., & Benes, B. (2018). Near-convex decomposition and layering for efficient 3D printing. Additive Manufacturing, 21, 383–394. https://doi.org/10.1016/j.addma.2018.03.00810.1016/j.addma.2018.03.008 ↗
8. Duran, C., Subbian, V., Giovanetti, M. T., Simkins, J. R., & Beyette, F. R., Jr. (2015). Experimental desktop 3D printing using dual extrusion and water-soluble polyvinyl alcohol. Rapid Prototyping Journal. https://doi.org/10.1108/rpj-09-2014-011710.1108/rpj-09-2014-0117 ↗
9. Ezair, B., Massarwi, F., & Elber, G. (2015). Orientation analysis of 3D objects toward minimal support volume in 3D-printing. Computers & Graphics, 51, 117–124. https://doi.org/10.1016/j.cag.2015.05.00910.1016/j.cag.2015.05.009 ↗
10. International Organization for Standardization. (2017). Size designation of clothes. Part 1: Anthropometric definitions for body measurement (ISO Standard No. 8559–1: 2017). https://www.iso.org/standard/61686.html.
11. International Organization for Standardization. (2015). Additive Manufacturing–General Principles–Terminology (ISO/ASTM Standard No. 52900: 2015). https://www.iso.org/standard/69669.html.
12. Jadoon, A. K., Wu, C., Liu, Y.-J., He, Y., & Wang, C. C. (2018). Interactive partitioning of 3D models into printable parts. IEEE Computer Graphics and Applications, 38(4), 38–53. https://doi.org/10.1109/mcg.2018.18213071910.1109/mcg.2018.182130719 ↗
13. Jiang, J., Xu, X., & Stringer, J. (2018). Support structures for additive manufacturing: a review. Journal of Manufacturing and Materials Processing, 2(4), 64. https://doi.org/10.3390/jmmp204006410.3390/jmmp2040064 ↗
14. Kim, S., & Sul, I. H. (2018). Minimization of support structure using cone-shaped body segmentation in fused deposition modeling type small size human manikin 3D printing. Textile Science and Engineering, 55(3), 194–201. https://doi.org/https://doi.org/10.12772/TSE.2018.55.194.10.12772/TSE.2018.55.194 ↗
15. Lu, L., Sharf, A., Zhao, H., Wei, Y., Fan, Q., Chen, X., Savoye, Y., Tu, C., Cohen-Or, D., & Chen, B. (2014). Build-to-last: strength to weight 3D printed objects. ACM Transactions on Graphics (ToG), 33(4), 1–10. https://doi.org/10.1145/2601097.260116810.1145/2601097.2601168 ↗
16. Luo, L., Baran, I., Rusinkiewicz, S., & Matusik, W. (2012). Chopper: partitioning models into 3D-printable parts. ACM Transactions on Graphics, 31(6), 129. https://doi.org/10.1145/2366145.236614810.1145/2366145.2366148 ↗
17. Murphy, S. V., & Atala, A. (2014). 3D bioprinting of tissues and organs. Nature Biotechnology, 32(8), 773. https://doi.org/10.1038/nbt.295810.1038/nbt.2958 ↗
18. Nayak, R., & Padhye, R. (2017). Manikins for textile evaluation. Woodhead Publishing.
19. Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T., & Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering, 143, 172–196. https://doi.org/10.1016/j.compositesb.2018.02.01210.1016/j.compositesb.2018.02.012 ↗
20. Nicholson, M. (2016). QChopper-segmentation of large surface meshes for 3D printing [Unpublished doctoral dissertation]. Canada: Queen’s University.
21. PelikanSoftwareKft. (2020). FinalMesh Boolean API. http://www.finalmesh.com/boolean3d_api.htm. Retrived from, October 26, 2020.
22. Pentland, A., & Williams, J. (1989). Good vibrations: Modal dynamics for graphics and animation. In Proceedings of the 16th Annual Conference on Computer Graphics and Interactive, vol 23 (pp. 215–222). https://doi.org/10.1145/74333.74355.10.1145/74333.74355 ↗
23. Perrot, A., Rangeard, D., & Pierre, A. (2016). Structural built-up of cement-based materials used for 3D-printing extrusion techniques. Materials and Structures, 49(4), 1213–1220. https://doi.org/10.1617/s11527-015-0571-0.10.1617/s11527-015-0571-0 ↗
24. Shen, Z.-H., Dai, N., Li, D.-W., & Wu, C.-Y. (2016). Bridge support structure generation for 3D printing. 2015 international workshop on materials, manufacturing technology, electronics and information science (pp. 141–149). https://doi.org/10.1142/9789813109384_0016.10.1142/9789813109384_0016 ↗
25. Stromquist, W. (1980). How to cut a cake fairly. The American Mathematical Monthly, 87(8), 640–644. https://doi.org/10.2307/232095110.2307/2320951 ↗
26. Sul, I. H., & Kang, T. J. (2010). Regeneration of 3D body scan data using semi-implicit particle-based method. International Journal of Clothing Science and Technology, 22(4), 248–271. https://doi.org/10.1108/0955622101104828610.1108/09556221011048286 ↗
27. Talataisong, W., Ismaeel, R., Marques, T. H., Mousavi, S. A., Beresna, M., Gouveia, M., Sandoghchi, S. R., Lee, T., Cordeiro, C. M., & Brambilla, G. (2018). Mid-IR Hollow-core microstructured fiber drawn from a 3D printed PETG preform. Scientific reports, 8(1), 1–8. https://doi.org/10.1038/s41598-018-26561-810.1038/s41598-018-26561-8 ↗
28. Teschner, M., Kimmerle, S., Heidelberger, B., Zachmann, G., Raghupathi, L., Fuhrmann, A., Cani, M. P., Faure, F., Magnenat-Thalmann, N., & Strasser, W. (2005). Collision detection for deformable objects. Computer Graphics Forum. https://doi.org/10.1111/j.1467-8659.2005.00829.x10.1111/j.1467-8659.2005.00829.x ↗
29. Thielen, M., & Delbressine, F. (2016). Rib cage recreation: Towards realistic neonatal manikin construction using MRI scanning and 3D printing. In Proceedings of SMI’2016 fabrication and sculpting event (FASE), Germany (pp. 20–23).
30. Vaidya, R., & Anand, S. (2016). Optimum support structure generation for additive manufacturing using unit cell structures and support removal constraint. Procedia Manufacturing, 5, 1043–1059. https://doi.org/10.1016/j.promfg.2016.08.07210.1016/j.promfg.2016.08.072 ↗
31. Vanek, J., Galicia, J., Benes, B., Měch, R., Carr, N., Stava, O., & Miller, G. (2014). Packmerger: A 3d print volume optimizer. Computer Graphics Forum. https://doi.org/10.1111/cgf.1235310.1111/cgf.12353 ↗
32. Wang, W., Chao, H., Tong, J., Yang, Z., Tong, X., Li, H., Liu, X., & Liu, L. (2015). Saliency-preserving slicing optimization for effective 3D printing. Computer Graphics Forum. https://doi.org/10.1111/cgf.1252710.1111/cgf.12527 ↗
33. Wang, W., Liu, Y.-J., Wu, J., Tian, S., Wang, C. C., Liu, L., & Liu, X. (2017). Support-free hollowing. IEEE Transactions on Visualization and Computer Graphics, 24(10), 2787–2798. https://doi.org/10.1109/tvcg.2017.276446210.1109/tvcg.2017.2764462 ↗
34. Wang, W., Wang, T. Y., Yang, Z., Liu, L., Tong, X., Tong, W., Deng, J., Chen, F., & Liu, X. (2013). Cost-effective printing of 3D objects with skin-frame structures. ACM Transactions on Graphics (ToG), 32(6), 177. https://doi.org/10.1145/2508363.250838210.1145/2508363.2508382 ↗
35. Wei, X., Qiu, S., Zhu, L., Feng, R., Tian, Y., Xi, J., & Zheng, Y. (2017). Toward support-free 3d printing: A skeletal approach for partitioning models. IEEE Transactions on Visualization and Computer Graphics, 24(10), 2799–2812. https://doi.org/10.1109/TVCG.2017.276704710.1109/TVCG.2017.2767047 ↗
36. Zhang, X., Xia, Y., Wang, J., Yang, Z., Tu, C., & Wang, W. (2015). Medial axis tree—an internal supporting structure for 3D printing. Computer Aided Geometric Design, 35, 149–162. https://doi.org/10.1016/j.cagd.2015.03.01210.1016/j.cagd.2015.03.012 ↗