journal article·2022-12-25Open access

Wearable capacitive pressure sensor using interdigitated capacitor printed on fabric

TranThuyNga Truong, Ji-Seon Kim, Eunji Yeun, Jooyong Kim

Fashion and Textiles· Volume 9· Issue 1

Abstract

Abstract This paper presented a systematic approach to electro-textile pressure sensors dependent on interdigitated capacitors (IDCs) printed on fabric. In this study, we proposed a highly sensitive, broad-range pressure sensor based on the combination of porous Ecoflex, carbon nanotubes (CNTs), and interdigitated electrodes. Firstly, characterizations of the interdigitated capacitor using silver ink on Cotton and Polyester fabric were completed by precision LCR meter across the frequency range from 1 to 300 kHz. The effect of the fabric on the performance of sensor sensitivity was included. Secondly, estimating and optimizing the volume fraction of CNTs and air gaps on the properties of composites are included. The presence of volume fraction CNTs enhanced the bond strength of composites and improved sensor deformability. The robustness of the presented sensor was demonstrated by testing under high pressure at 400 kPa for more than 20,000 cycles. Thirdly, the combination of CNTs and porous dielectric achieved a broad detection range (400 kPa) with a sensitivity range from 0.035 (at 400 kPa) to 0.15 $${\mathrm{KPa}}-1$$ (at 50 kPa). Finally, the Cotton and Polyester substrate comparison demonstrates that selecting a suitable dielectric substrate affects sensor sensitivity and signal output.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Aparicio, R., & Hajimiri, A. (2002). Capacity limits and matching properties of integrated capacitors. IEEE Journal of Solid-State Circuits, 37(3), 384–393. https://doi.org/10.1109/4.98709110.1109/4.987091 ↗
2. Atalay, O., Atalay, A., Gafford, J., & Walsh, C. (2018). A highly sensitive capacitive-based soft pressure sensor based on a conductive fabric and a microporous dielectric layer. Advanced Materials Technologies, 3(1), Article 1700237. https://doi.org/10.1002/admt.20170023710.1002/admt.201700237 ↗
3. Bauhofer, W., & Kovacs, J. Z. (2009). A review and analysis of electrical percolation in carbon nanotube polymer composites. Composites Science and Technology, 69(10), 1486–1498. https://doi.org/10.1016/j.compscitech.2008.06.01810.1016/j.compscitech.2008.06.018 ↗
4. Castano, L. M., & Flatau, A. B. (2014). Smart fabric sensors and e-textile technologies: A review. Smart Materials and Structures, 23(5), Article 053001. https://doi.org/10.1088/0964-1726/23/5/05300110.1088/0964-1726/23/5/053001 ↗
5. Cerovic, D. D., Dojcilovic, J. R., Asanovic, K. A., & Mihajlidi, T. A. (2009). Dielectric investigation of some woven fabrics. Journal of Applied Physics, 106(8), Article 084101. https://doi.org/10.1063/1.323651110.1063/1.3236511 ↗
6. Chen, S., Song, Y., & Xu, F. (2018). Flexible and highly sensitive resistive pressure sensor based on carbonized crepe paper with corrugated structure. ACS Applied Materials & Interfaces, 10(40), 34646–34654. https://doi.org/10.1021/acsami.8b1353510.1021/acsami.8b13535 ↗
7. Flexible Capacitive Pressure Sensor Enhanced by Tilted Micropillar Arrays|ACS Applied Materials & Interfaces. (n.d.). https://doi.org/10.1021/acsami.9b03718. https://pubs.acs.org/doi/abs/. Accessed 2 Sept 202110.1021/acsami.9b03718 ↗
8. Feng, C., Yi, Z., Jin, X., Seraji, S. M., Dong, Y., Kong, L., & Salim, N. (2020). Solvent crystallization-induced porous polyurethane/graphene composite foams for pressure sensing. Composites Part b: Engineering, 194, Article 108065. https://doi.org/10.1016/j.compositesb.2020.10806510.1016/j.compositesb.2020.108065 ↗
9. Guo, Y., Gao, S., Yue, W., Zhang, C., & Li, Y. (2019). Anodized aluminum oxide-assisted low-cost flexible capacitive pressure sensors based on double-sided nanopillars by a facile fabrication method. ACS Applied Materials & Interfaces, 11(51), 48594–48603. https://doi.org/10.1021/acsami.9b1796610.1021/acsami.9b17966 ↗
10. Huang, Y., Fan, X., Chen, S.-C., & Zhao, N. (2019). Emerging technologies of flexible pressure sensors: Materials, modeling, devices, and manufacturing. Advanced Functional Materials, 29(12), Article 1808509. https://doi.org/10.1002/adfm.20180850910.1002/adfm.201808509 ↗
11. Hwang, J., Kim, Y., Yang, H., & Oh, J. H. (2021). Fabrication of hierarchically porous structured PDMS composites and their application as a flexible capacitive pressure sensor. Composites Part b: Engineering, 211, Article 108607. https://doi.org/10.1016/j.compositesb.2021.10860710.1016/j.compositesb.2021.108607 ↗
12. Kou, H., Zhang, L., Tan, Q., Liu, G., Lv, W., Lu, F., et al. (2018). Wireless flexible pressure sensor based on micro-patterned Graphene/PDMS composite. Sensors and Actuators a: Physical, 277, 150–156. https://doi.org/10.1016/j.sna.2018.05.01510.1016/j.sna.2018.05.015 ↗
13. Kwon, D., Lee, T.-I., Shim, J., Ryu, S., Kim, M. S., Kim, S., et al. (2016). Highly sensitive, flexible, and wearable pressure sensor based on a giant piezocapacitive effect of three-dimensional microporous elastomeric dielectric layer. ACS Applied Materials & Interfaces, 8(26), 16922–16931. https://doi.org/10.1021/acsami.6b0422510.1021/acsami.6b04225 ↗
14. Lei, Z., Wang, Q., Sun, S., Zhu, W., & Wu, P. (2017). A Bioinspired mineral hydrogel as a self-healable, mechanically adaptable ionic skin for highly sensitive pressure sensing. Advanced Materials (deerfield Beach, Fla.). https://doi.org/10.1002/adma.20170032110.1002/adma.201700321 ↗
15. Mahata, C., Algadi, H., Lee, J., Kim, S., & Lee, T. (2020). Biomimetic-inspired micro-nano hierarchical structures for capacitive pressure sensor applications. Measurement, 151, Article 107095. https://doi.org/10.1016/j.measurement.2019.10709510.1016/j.measurement.2019.107095 ↗
16. Ong, K. G., & Grimes, C. A. (2000). A resonant printed-circuit sensor for remote query monitoring of environmental parameters. Smart Materials and Structures, 9(4), 421–428. https://doi.org/10.1088/0964-1726/9/4/30510.1088/0964-1726/9/4/305 ↗
17. Ruth, S. R. A., & Bao, Z. (2020). Designing tunable capacitive pressure sensors based on material properties and microstructure geometry. ACS Applied Materials & Interfaces, 12(52), 58301–58316. https://doi.org/10.1021/acsami.0c1919610.1021/acsami.0c19196 ↗
18. Ruth, S. R. A., Beker, L., Tran, H., Feig, V. R., Matsuhisa, N., & Bao, Z. (2020). Rational design of capacitive pressure sensors based on pyramidal microstructures for specialized monitoring of biosignals. Advanced Functional Materials, 30(29), Article 1903100. https://doi.org/10.1002/adfm.20190310010.1002/adfm.201903100 ↗
19. One-Rupee Ultrasensitive Wearable Flexible Low-Pressure Sensor | ACS Omega. (n.d.). https://doi.org/10.1021/acsomega.0c02278. Accessed 27 July 202110.1021/acsomega.0c02278 ↗
20. Seyedin, S., Zhang, P., Naebe, M., Qin, S., Chen, J., Wang, X., & Razal, J. M. (2019). Textile strain sensors: A review of the fabrication technologies, performance evaluation and applications. Materials Horizons, 6(2), 219–249. https://doi.org/10.1039/C8MH01062E10.1039/C8MH01062E ↗
21. Shang, S., Tang, C., Jiang, B., Song, J., Jiang, B., Zhao, K., et al. (2021). Enhancement of dielectric permittivity in carbon nanotube/polyvinylidene fluoride composites by constructing of segregated structure. Composites Communications, 25, Article 100745. https://doi.org/10.1016/j.coco.2021.10074510.1016/j.coco.2021.100745 ↗
22. Wan, S., Bi, H., Zhou, Y., Xie, X., Su, S., Yin, K., & Sun, L. (2017). Graphene oxide as high-performance dielectric materials for capacitive pressure sensors. Carbon, 114, 209–216. https://doi.org/10.1016/j.carbon.2016.12.02310.1016/j.carbon.2016.12.023 ↗
23. Wang, J., Jiu, J., Nogi, M., Sugahara, T., Nagao, S., Koga, H., et al. (2015). A highly sensitive and flexible pressure sensor with electrodes and elastomeric interlayer containing silver nanowires. Nanoscale, 7(7), 2926–2932. https://doi.org/10.1039/C4NR06494A10.1039/C4NR06494A ↗
24. Wang, X., Xia, Z., Zhao, C., Huang, P., Zhao, S., Gao, M., & Nie, J. (2020). Microstructured flexible capacitive sensor with high sensitivity based on carbon fiber-filled conductive silicon rubber. Sensors and Actuators a: Physical, 312, Atricle 112147. https://doi.org/10.1016/j.sna.2020.11214710.1016/j.sna.2020.112147 ↗
25. Xiong, Y., Shen, Y., Tian, L., Hu, Y., Zhu, P., Sun, R., & Wong, C.-P. (2020). A flexible, ultra-highly sensitive and stable capacitive pressure sensor with convex microarrays for motion and health monitoring. Nano Energy, 70, Atricle 104436. https://doi.org/10.1016/j.nanoen.2019.10443610.1016/j.nanoen.2019.104436 ↗
26. Yoon, J. I., Choi, K. S., & Chang, S. P. (2017). A novel means of fabricating microporous structures for the dielectric layers of capacitive pressure sensor. Microelectronic Engineering, 179, 60–66. https://doi.org/10.1016/j.mee.2017.04.02810.1016/j.mee.2017.04.028 ↗
27. Zang, Y., Zhang, F., Di, C., & Zhu, D. (2015). Advances of flexible pressure sensors toward artificial intelligence and health care applications. Materials Horizons, 2(2), 140–156. https://doi.org/10.1039/C4MH00147H10.1039/C4MH00147H ↗