Effect of the alkaline surface modification of the substrate fabric on the peel strength of 3D printed composite fabrics
Source abstract
Abstract
Abstract In the modern fashion industry, 3D printing technologies are increasingly combined with traditional textile fabrics to create innovative 3D garments. Although this integration may not entirely replace traditional clothing manufacturing techniques, it presents opportunities for innovative applications in garment production. In terms of the performance of 3D printed composite fabrics (3D-PCF), adhesion between the 3D printing polymer and the substrate fabric is crucial. However, research on how fabric surface properties influence the adhesion between the substrate fabric and 3D filaments remains limited. Therefore, this study investigates the effects of alkaline surface modifications on the peel strength of substrate fabrics bonded with 3D printing filaments. Alkaline treatment reduces fabric weight, thickness, and tensile strength. Moreover, as both alkaline treatment time and temperature increased, the 3D-PCF peel strength decreased by 30–50%. This is attributed to the reduced fiber diameter and smaller adhesive surface area. Conversely, at NaOH concentrations of 4% and 6%, the increased surface roughness improved peel strength, reaching 15.6 N and 15.9 N, respectively. However, at 8%, surface etching reduced peel strength to 3.7 N. These results demonstrate that optimal alkaline treatment improves surface roughness and the peel strength, while excessive treatment diminishes the adhesive surface area and adhesion strength. Excessive treatment also significantly alters bulk fabric properties, further reducing adhesion. Controlling alkaline concentration to limit bulk changes while increasing surface roughness is an effective strategy to improve 3D-PCF adhesion. Enhanced peel strength through surface modification is expected to prolong the lifespan of 3D-PCF, especially in high-performance applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Textile materials and evaluations · Dyeing and Modifying Textile Fibers
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Başyiğit, Z. Ö. (2018). Effects of chemical and surface modification on mechanical and chemical properties of polyester fabrics. Düzce Üniversitesi Bilim Ve Teknoloji Dergisi, 6(4), 1344–1353. https://doi.org/10.29130/dubited.42351610.29130/dubited.423516 ↗
2. Cheung, T. C., & Choi, S. Y. (2023). Evaluation of the influence of three-dimensional printing conditions on peel resistance and surface roughness of flexible polymer-textile composites. Textile Research Journal, 93(7–8), 1531–1550. https://doi.org/10.1177/0040517522113384110.1177/00405175221133841 ↗
3. Čorak, I., Tarbuk, A., Đorđević, D., Višić, K., & Botteri, L. (2022). Sustainable alkaline hydrolysis of polyester fabric at low temperature. Materials, 15(4), Article 1530. https://doi.org/10.3390/ma1504153010.3390/ma15041530 ↗
4. Demir, M., & Seki, Y. (2023). Interfacial adhesion strength between FDM-printed PLA parts and surface-treated cellulosic-woven fabrics. Rapid Prototyping Journal, 29(6), 1166–1174. https://doi.org/10.1108/RPJ-10-2022-036910.1108/RPJ-10-2022-0369 ↗
5. Eutionnat-Diffo, P. A., Chen, Y., Guan, J., Cayla, A., Campagne, C., Zeng, X., & Nierstrasz, V. (2019). Stress, strain and deformation of poly-lactic acid filament deposited onto polyethylene terephthalate woven fabric through 3D printing process. Scientific Reports, 9(1), Article 14333. https://doi.org/10.1038/s41598-019-50832-710.1038/s41598-019-50832-7 ↗
6. Eutionnat-Diffo, P. A., Chen, Y., Guan, J., Cayla, A., Campagne, C., Zeng, X., & Nierstrasz, V. (2020). Optimization of adhesion of poly lactic acid 3D printed onto polyethylene terephthalate woven fabrics through modelling using textile properties. Rapid Prototyping Journal, 26(2), 390–401. https://doi.org/10.1108/RPJ-05-2019-013810.1108/RPJ-05-2019-0138 ↗
7. Gupta, D., Chaudhary, H., & Gupta, C. (2014). Topographical changes in polyester after chemical, physical and enzymatic hydrolysis. The Journal of the Textile Institute, 106(7), 690–698. https://doi.org/10.1080/00405000.2014.93404610.1080/00405000.2014.934046 ↗
8. Han, M. S., Park, Y., & Park, C. H. (2016). Development of superhydrophobic polyester fabrics using alkaline hydrolysis and coating with fluorinated polymers. Fibers and Polymers, 17, 241–247. https://doi.org/10.1007/s12221-016-5693-710.1007/s12221-016-5693-7 ↗
9. Han, Y., & Yun, C. (2024). Effect of substrate fabric characteristics on the peel strength of 3D-printed composite fabrics. Fashion and Textiles, 11(1), 40. https://doi.org/10.1186/s40691-024-00405-810.1186/s40691-024-00405-8 ↗
10. International Organization for Standardization. (1977). ISO 3801:1977 Textiles—Woven fabrics—determination of mass per unit length and mass per unit area. ISO.
11. International Organization for Standardization. (1996). ISO 5084:2011 Textiles—Determination of thickness of textiles and textile products. ISO.
12. International Organization for Standardization. (1997). ISO 4287:1997 Geometrical product specifications (GPS)—Surface texture: Profile method—Terms, definitions and surface texture parameters. ISO.
13. International Organization for Standardization. (2022). ISO 11339:2022 Adhesives—T-peel test for flexible-to-flexible bonded assemblies. ISO.
14. Kechagias, J. D., Chaidas, D., & Spahiu, T. (2024). Decorative 3d printing on textiles using elastomer TPU filament under different printing conditions. Rapid Prototyping Journal, 30(10), 2033–2042. https://doi.org/10.1108/RPJ-03-2024-010610.1108/RPJ-03-2024-0106 ↗
15. Kodrić, M., Đorđević, D., Tarbuk, A., Islam, S., Čorak, I., Đorđević, S., & Motaleb, K. Z. M. (2025). Chemical modification of polyester knitted fabric with ultrasound to improve hydrophilicity and wettability. Fibers and Polymers. https://doi.org/10.1007/s12221-025-01001-310.1007/s12221-025-01001-3 ↗
16. Korger, M., Bergschneider, J., Lutz, M., Mahltig, B., Finsterbusch, K., & Rabe, M. (2016). Possible applications of 3D printing technology on textile substrates. IOP Conference Series: Materials Science and Engineering, 141, Article 012011. https://doi.org/10.1088/1757-899X/141/1/01201110.1088/1757-899X/141/1/012011 ↗
17. Korger, M., Glogowsky, A., Sanduloff, S., Steinem, C., Huysman, S., Horn, B., Ernst, M., & Rabe, M. (2020). Testing thermoplastic elastomers selected as flexible three-dimensional printing materials for functional garment and technical textile applications. Journal of Engineered Fibers and Fabrics. https://doi.org/10.1177/155892502092459910.1177/1558925020924599 ↗
18. Meyer, P., Döpke, Ch., & Ehrmann, A. (2019). Improving adhesion of three-dimensional printed objects on textile fabrics by polymer coating. Journal of Engineered Fibers and Fabrics, 14, 1–7. https://doi.org/10.1177/155892501989525710.1177/1558925019895257 ↗
19. Molina, R., Esquena, J., & Erra, P. (2010). Interfacial processes in textile materials: Relevance to adhesion. Journal of Adhesion Science and Technology, 24(1), 7–33. https://doi.org/10.1163/016942409X1253886505591710.1163/016942409X12538865055917 ↗
20. Mpofu, N. S., Mwasiagi, J. I., Nkiwane, L. C., & Njuguna, D. (2019). Use of regression to study the effect of fabric parameters on the adhesion of 3D printed PLA polymer onto woven fabrics. Fashion and Textiles, 6, 1–12. https://doi.org/10.1186/s40691-019-0180-610.1186/s40691-019-0180-6 ↗
21. Narula, A., Pastore, C. M., Schmelzeisen, D., El Basri, S., Schenk, J., & Shajoo, S. (2018). Effect of knit and print parameters on peel strength of hybrid 3D printed textiles. Journal of Textiles and Fibrous Materials, 1, Article 2515221117749251. https://doi.org/10.1177/251522111774925110.1177/2515221117749251 ↗
22. Oh, J. H., & Park, C. H. (2018). Robust fluorine-free superhydrophobic PET fabric using alkaline hydrolysis and thermal hydrophobic aging process. Macromolecular Materials and Engineering, 303(7), Article 1700673. https://doi.org/10.1002/mame.20170067310.1002/mame.201700673 ↗
23. Parvinzadeh, M. (2012). Surface modification of synthetic fibers to improve performance: Recent approaches. Global J Phys Chem, 3(2). http://www.cognizure.com/abstract.aspx?p=100637245
24. Sanatgar, R. H., Campagne, C., & Nierstrasz, V. (2017). Investigation of the adhesion properties of direct 3D printing of polymers and nanocomposites on textiles: Effect of FDM printing process parameters. Applied Surface Science, 403, 551–563. https://doi.org/10.1016/J.APSUSC.2017.01.11210.1016/J.APSUSC.2017.01.112 ↗
25. Silvestre, R., Garcia-Breijo, E., Ferri, J., Montava, I., & Bou-Belda, E. (2023). The influence of the structure of cotton fabrics on the adhesion of conductive polymer printed with 3D printing technology. Polymers, 15(3), Article 668. https://doi.org/10.3390/polym1503066810.3390/polym15030668 ↗
26. Sitotaw, D. B., Ahrendt, D., Kyosev, Y., & Kabish, A. K. (2020). Additive manufacturing and textiles—State-of-the-art. Applied Sciences, 10(15), Article 5033. https://doi.org/10.3390/app1015503310.3390/app10155033 ↗
27. Spahiu, T., Al-Arabiyat, M., Martens, Y., Ehrmann, A., Piperi, E., & Shehi, E. (2018). Adhesion of 3D printing polymers on textile fabrics for garment production. IOP Conference Series: Materials Science and Engineering, 459, Article 012065. https://doi.org/10.1088/1757-899X/459/1/01206510.1088/1757-899X/459/1/012065 ↗
28. Störmer, J., Görmer, D., & Ehrmann, A. (2021). Influence of washing on the adhesion between 3D-printed TPU and woven fabrics. Communications in Development and Assembling of Textile Products, 2(1), 34–39. https://doi.org/10.25367/cdatp.2021.2.p34-3910.25367/cdatp.2021.2.p34-39 ↗
29. Yap, Y. L., & Yeong, W. Y. (2014). Additive manufacture of fashion and jewellery products: A mini review. Virtual and Physical Prototyping, 9(3), 195–201. https://doi.org/10.1080/17452759.2014.93899310.1080/17452759.2014.938993 ↗
30. Youn, S., & Park, C. (2019). Development of breathable Janus superhydrophobic polyester fabrics using alkaline hydrolysis and blade coating. Textile Research Journal, 89(6), 959–974. https://doi.org/10.1177/004051751876075010.1177/0040517518760750 ↗