journal article·1998-12

STATISTICAL MODELLING OF INTERGRANULAR BRITTLE FRACTURE IN A LOW ALLOY STEEL

Yahya, Borit, Piques, Pineau

Publisher page

Abstract

The intergranular brittle fracture (IBF) behaviour of a low alloy steel 16MND5 (A508 Cl. 3) was investigated. A temper embrittlement heat treatment was applied to the material to simulate the effect of local brittle zones (ghost lines) which can be found in the as‐received material condition. An increase in the Charpy V toughness transition temperature and a significant decrease in the fracture toughness measured on CT‐type specimens were observed in the embrittled material, as compared to the reference material which was submitted to the same austenitizing and tempering heat treatment, but which was not subjected to the temper embrittlement treatment. Tensile tests on notched specimens were carried out to measure the Weibull stress and scatter in the results. A statistical model, the Beremin model, originally proposed for brittle cleavage fracture was applied to IBF. It is shown that this model is not able to fully account for the results, in particular for the existence of two slopes in a Weibull plot. Systematic fractographic observations showed that the low slope regime in this representation was associated with the existence of MnS inclusions initiating brittle fracture, while the larger slope was related to microstructural defects. Initiation of IBF from MnS inclusions can occur when the material is still elastically deformed while the second population of microstructural defects is active in the plastic regime. A modified statistical model based on the Beremin model and taking into account these specific aspects is proposed in the framework of the weakest link theory. The parameters of this model are identified from test results on notched specimens. It is shown that this model is able to predict the temperature dependence of fracture toughness and the scatter in the experimental results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. ATavassoli ABougault ABisson1983The effect of residual impurities on the temper embrittlement susceptibility of large A508 Class 3 vessel forging.Proceedings of the International Conference on the Effect of Residual Impurity and Micro‐alloying Elements on Weldability and Weld Properties. Welding Institute London.
2. Temper embrittlement susceptibility and toughness of A508 Class 3 steel
3. MAl Mundheri1986Approaches globale et locale de la rupture fragile et ductile d’aciers faiblement alliés (16 MND5). Influence de l’irradiation. Ph.D. thesis. Université Paris‐Sud Centre d’Orsay France.
4. 10.1111/j.1460-2695.1994.tb00261.x10.1111/j.1460-2695.1994.tb00261.x ↗
5. Temper brittleness—an interpretive review
6. 10.1007/BF0264782510.1007/BF02647825 ↗
7. MGuttmann1995Grain boundary segregation and embrittlement in multicomponent systems: recent literature revisitedThe Donald McLean Symposium(Edited by E. D. Hondros and M. McLean). The Institute of Materials pp. 59–81.
8. 10.1016/0022-5096(73)90008-210.1016/0022-5096(73)90008-2 ↗
9. 10.1007/BF0266330210.1007/BF02663302 ↗
10. 10.1179/03063458479042038410.1179/030634584790420384 ↗
11. TLAnderson DStienstra RHDoddsJr1994A theoretical framework for addressing fracture in the ductile–brittle transition region.Fracture Mechanics: Twenty‐Fourth Volume ASTM STP 1207 pp. 186–214.10.1520/STP13706S ↗
12. DTigges1995Nocivité des défauts sous revêtement des cuves de reacteurs à eau sous pression. Ph.D. thesis Ecole des Mines de Paris France.
13. EKantidis1993Rupture intergranulaire d’un acier faiblement allié. Approches globale et locale. Ph.D. thesis Ecole des Mines de Paris France.
14. 10.1111/j.1460-2695.1994.tb00216.x10.1111/j.1460-2695.1994.tb00216.x ↗
15. OMLYahya1997Approche locale de la rupture fragile intergranulaire de l’acier 16MND5. Ph.D. thesis Ecole des Mines de Paris France.10.1051/jp4:1998421 ↗
16. PPilvin1988Identification des paramètres de modéles de comportmentProceedings of Mecamat Conference on Inelastic Behaviour of Solids(Edited by C. Oytanaet al). Besaçon France.
17. 10.1016/S0045-7825(96)01124-310.1016/S0045-7825(96)01124-3 ↗
18. 10.1007/BF0071992410.1007/BF00719924 ↗
19. 10.1007/BF0004258910.1007/BF00042589 ↗
20. 10.1007/BF0264594210.1007/BF02645942 ↗
21. 10.1115/1.344333810.1115/1.3443338 ↗
22. 10.1016/0022-5096(87)90007-X10.1016/0022-5096(87)90007-X ↗
23. OPSovik1996Numerical modelling of ductile fracture—a damage mechanics approach. Ph.D. thesis Norwegian University of Science and Technology Trondheim Norway.
24. Comparison between a quantitative microscope and chemical methods for assessment of non metallic inclusions
25. 10.1016/0022-5096(68)90014-810.1016/0022-5096(68)90014-8 ↗
26. 10.1016/0022-5096(68)90013-610.1016/0022-5096(68)90013-6 ↗
27. 10.1016/0022-5096(91)90049-T10.1016/0022-5096(91)90049-T ↗
28. Higher order asymptotic fields in a power‐law hardening material10.1016/0013-7944(93)90002-A ↗
29. Effet d’echelle et rupture fragile intergranulaire de l’acier 16MND5