Influence of testing method on mode II fracture toughness (KIIc) of hot mix asphalt mixtures
Source abstract
Abstract
Abstract Till now, only very limited test results have been reported for mode II fracture toughness (KIIc) of asphalt mixtures. In the absence of any standard testing method for determiningKIIcvalue for these materials, in this research, an experimental program is done to measure and investigate this parameter at low‐temperature using four different test specimens and configurations. The specimens have circular and semi‐circular shapes but with different crack types and loading setup namely: center cracked circular disc (CCCD), inclined cracked semi‐circular bend (ISCB), asymmetric semi‐circular bend (ASCB), and asymmetric edge notch disc bend (AENDB). The test results showed thatKIIcdepends significantly on the geometry and configuration of test sample such that its value determined from the AENDB sample is about twice theKIIcvalue of ISCB specimen. Among the investigated samples, the AENDB results can simulate more realistically the actual and field conditions of real cracked overlays subjected to traffic loading.KIIcresults are also predicted successfully using two fracture criteria capable of considering the influence of geometry on mode II cracking.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Fatigue and fracture mechanics · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Hydraulic and Civil Engineering Xinjiang Agricultural University Urumqi China
Xinjiang Key Laboratory of Hydraulic Engineering Security and Water Disasters Prevention Urumqi China
Welding and Joining Research Center, School of Industrial Engineering Iran University of Science and Technology (IUST) Narmak, 16846‐13114 Tehran Iran
Funding
Science Fund for Distinguished Young Scholars of Xinjiang Autonomous Region
References (100+)
Show source-provided references
1. 10.1016/j.engfracmech.2020.10687510.1016/j.engfracmech.2020.106875 ↗
2. 10.1080/14488353.2017.138596410.1080/14488353.2017.1385964 ↗
3. 10.1016/j.conbuildmat.2020.11892710.1016/j.conbuildmat.2020.118927 ↗
4. 10.1016/j.engfracmech.2017.06.00310.1016/j.engfracmech.2017.06.003 ↗
5. 10.1016/j.engfracmech.2010.12.01310.1016/j.engfracmech.2010.12.013 ↗
6. 10.1111/ffe.1343410.1111/ffe.13434 ↗
7. 10.1111/ffe.1292810.1111/ffe.12928 ↗
8. 10.1111/ffe.1320710.1111/ffe.13207 ↗
9. 10.1080/14680629.2006.969006310.1080/14680629.2006.9690063 ↗
10. 10.1111/ffe.1364710.1111/ffe.13647 ↗
11. 10.3390/app1111509410.3390/app11115094 ↗
12. 10.1520/JTE1257910.1520/JTE12579 ↗
13. 10.1617/s11527-008-9412-810.1617/s11527-008-9412-8 ↗
14. 10.1080/10298436.2011.56576610.1080/10298436.2011.565766 ↗
15. 10.1016/j.conbuildmat.2015.04.04710.1016/j.conbuildmat.2015.04.047 ↗
16. Mixed mode fracture toughness of recycled tire rubber‐filled concrete for airfield rigid pavements
17. 10.3390/app1107301310.3390/app11073013 ↗
18. 10.1016/j.conbuildmat.2019.11785010.1016/j.conbuildmat.2019.117850 ↗
19. 10.1007/s12517‐022‐10466‐y10.1007/s12517‐022‐10466‐y ↗
20. 10.1520/JTE2015014510.1520/JTE20150145 ↗
21. 10.1016/j.conbuildmat.2013.07.08410.1016/j.conbuildmat.2013.07.084 ↗
22. Semi‐circular bending test; simple but useful?
23. 10.1111/ffe.1247410.1111/ffe.12474 ↗
24. 10.1016/j.coco.2021.10096910.1016/j.coco.2021.100969 ↗
25. 10.1016/j.engfracmech.2018.02.00710.1016/j.engfracmech.2018.02.007 ↗
26. 10.1016/j.conbuildmat.2021.12613910.1016/j.conbuildmat.2021.126139 ↗
27. 10.1080/10298436.2018.155533210.1080/10298436.2018.1555332 ↗
28. 10.1016/j.engfracmech.2020.10723010.1016/j.engfracmech.2020.107230 ↗
29. 10.1016/j.engfracmech.2019.10649610.1016/j.engfracmech.2019.106496 ↗
30. 10.1016/j.conbuildmat.2018.05.13010.1016/j.conbuildmat.2018.05.130 ↗
31. 10.1016/j.conbuildmat.2019.11736510.1016/j.conbuildmat.2019.117365 ↗
32. 10.1016/j.ijsolstr.2016.03.01810.1016/j.ijsolstr.2016.03.018 ↗
33. 10.1016/j.engfracmech.2017.11.00710.1016/j.engfracmech.2017.11.007 ↗
34. 10.1016/j.conbuildmat.2021.12559010.1016/j.conbuildmat.2021.125590 ↗
35. 10.1016/j.tafmec.2021.10320710.1016/j.tafmec.2021.103207 ↗
36. 10.1016/j.tafmec.2022.10326110.1016/j.tafmec.2022.103261 ↗
37. 10.5267/j.esm.2020.3.00410.5267/j.esm.2020.3.004 ↗
38. 10.1111/ffe.1337910.1111/ffe.13379 ↗
39. Mixed mode I/III fracture parameters for edge‐notched diametrically compressed disc specimen
40. 10.5267/j.esm.2021.3.00310.5267/j.esm.2021.3.003 ↗
41. 10.1016/j.engfracmech.2020.10743410.1016/j.engfracmech.2020.107434 ↗
42. 10.1111/ffe.1357010.1111/ffe.13570 ↗
43. Evaluation of fiber‐reinforced asphalt mixtures using advanced material characterization tests10.1520/JTE102442 ↗
44. 10.5267/j.esm.2018.1.00310.5267/j.esm.2018.1.003 ↗
45. 10.1177/036119810519290012210.1177/0361198105192900122 ↗
46. 10.1177/001448510505320510.1177/0014485105053205 ↗
47. 10.1016/j.conbuildmat.2017.11.04110.1016/j.conbuildmat.2017.11.041 ↗
48. 10.1016/j.engfracmech.2012.06.01510.1016/j.engfracmech.2012.06.015 ↗
49. Experimental study on mode I fracture toughness of different asphalt mixtures
50. 10.1016/j.ijprt.2017.10.00310.1016/j.ijprt.2017.10.003 ↗
51. ASTM D7313 · 2019
52. ASTM D8044 · 2017
53. 10.1016/j.conbuildmat.2019.04.06710.1016/j.conbuildmat.2019.04.067 ↗
54. 10.1016/j.conbuildmat.2020.11993910.1016/j.conbuildmat.2020.119939 ↗
55. 10.1016/j.conbuildmat.2021.12413010.1016/j.conbuildmat.2021.124130 ↗
56. 10.1016/j.tafmec.2018.11.00110.1016/j.tafmec.2018.11.001 ↗
57. 10.1016/j.engfracmech.2021.10793710.1016/j.engfracmech.2021.107937 ↗
58. 10.1111/ffe.1339810.1111/ffe.13398 ↗
59. 10.1016/j.msea.2009.08.05510.1016/j.msea.2009.08.055 ↗
60. 10.1016/j.euromechsol.2016.01.01210.1016/j.euromechsol.2016.01.012 ↗
61. 10.1016/j.engfracmech.2010.03.00910.1016/j.engfracmech.2010.03.009 ↗
62. 10.1007/s00603-011-0167-010.1007/s00603-011-0167-0 ↗
63. 10.1016/j.commatsci.2006.04.00810.1016/j.commatsci.2006.04.008 ↗
64. 10.5267/j.esm.2013.10.00110.5267/j.esm.2013.10.001 ↗
65. 10.5267/j.esm.2018.1.00210.5267/j.esm.2018.1.002 ↗
66. 10.1016/0148-9062(94)90464-210.1016/0148-9062(94)90464-2 ↗
67. 10.1016/j.engfracmech.2012.11.00310.1016/j.engfracmech.2012.11.003 ↗
68. 10.1016/j.ijsolstr.2020.02.01710.1016/j.ijsolstr.2020.02.017 ↗
69. 10.1016/j.engfracmech.2010.10.00110.1016/j.engfracmech.2010.10.001 ↗
70. 10.1016/j.tafmec.2021.10317110.1016/j.tafmec.2021.103171 ↗
71. 10.3221/IGF-ESIS.43.0910.3221/IGF-ESIS.43.09 ↗
72. 10.1016/j.conbuildmat.2013.12.09710.1016/j.conbuildmat.2013.12.097 ↗
73. 10.1016/j.conbuildmat.2020.12218110.1016/j.conbuildmat.2020.122181 ↗
74. 10.1016/j.tafmec.2020.10280010.1016/j.tafmec.2020.102800 ↗
75. 10.1115/1.365689710.1115/1.3656897 ↗
76. 10.1007/BF0003549310.1007/BF00035493 ↗
77. Hussain MA · 1974 · 2
78. 10.1046/j.1460-2695.2001.00377.x10.1046/j.1460-2695.2001.00377.x ↗
79. 10.1016/j.ijrmms.2017.09.00410.1016/j.ijrmms.2017.09.004 ↗
80. 10.1016/j.engfracmech.2017.12.01410.1016/j.engfracmech.2017.12.014 ↗
81. 10.1016/j.engfracmech.2016.10.00410.1016/j.engfracmech.2016.10.004 ↗
82. 10.1016/j.matdes.2015.07.13510.1016/j.matdes.2015.07.135 ↗
83. 10.1016/j.engfracmech.2017.09.02610.1016/j.engfracmech.2017.09.026 ↗
84. 10.1007/s00603-021-02541-910.1007/s00603-021-02541-9 ↗
85. 10.1134/S102995991702005910.1134/S1029959917020059 ↗
86. 10.1111/ffe.1263810.1111/ffe.12638 ↗
87. 10.1016/j.engfracmech.2022.10826810.1016/j.engfracmech.2022.108268 ↗
88. 10.1016/j.tafmec.2018.08.00310.1016/j.tafmec.2018.08.003 ↗
89. 10.1016/j.tafmec.2021.10316910.1016/j.tafmec.2021.103169 ↗
90. 10.1016/j.scriptamat.2008.03.02610.1016/j.scriptamat.2008.03.026 ↗
91. 10.1016/j.tafmec.2019.02.01610.1016/j.tafmec.2019.02.016 ↗
92. 10.1016/j.engfracmech.2017.05.01110.1016/j.engfracmech.2017.05.011 ↗
93. 10.1111/ffe.1242210.1111/ffe.12422 ↗
94. 10.1016/j.tafmec.2018.12.01510.1016/j.tafmec.2018.12.015 ↗
95. 10.1016/j.ijsolstr.2021.11117710.1016/j.ijsolstr.2021.111177 ↗
96. 10.1016/j.engfracmech.2020.10699010.1016/j.engfracmech.2020.106990 ↗
97. 10.1016/j.tafmec.2020.10268210.1016/j.tafmec.2020.102682 ↗
98. 10.1111/ffe.1258510.1111/ffe.12585 ↗
99. Measurement of the mixed mode fracture strength of green sandstone using three‐point bending specimens
100. 10.1007/s00603-018-1454-910.1007/s00603-018-1454-9 ↗