journal article·2014-07-04

Generating Characteristics of a Cross-Shaped Piezoelectric Energy Harvester

H.-I. Jun, N.-L. Kim, J.-H. Lim, S.-S. Jeong, M.-H. Kim, T.-G. Park

Ferroelectrics· Volume 466· Issue 1
Publisher page

Abstract

The cross shaped piezoelectric energy harvester is designed to generate effectively by given vibrations or forces at the center point of the harvester by consisting of four cantilever ceramic harvesters which are centro-symmetrically arranged in one structure. Moreover, these harvesters can be serially arranged on one shaft which going through the center points of each harvester. If vibration source is connected at one end of the shaft, the vibrations from the vibration source can be transferred to the center points of these harvesters simultaneously through the shaft and the harvesters can be activated by one vibration source. By FEA (finite element analysis) and experiment, generating voltage characteristics were obtained. Among the four kinds of materials of the metal plate, stainless steel (SUS304) was chosen to get the highest voltage. The output voltages were increased and the resonance frequencies were decreased when the elastic length was increased. Resonant frequencies and output voltages were not critically dependent on the elastic width from over a certain width. The output voltages and the resonance frequencies were increased when the elastic thickness was increased. By changing resistance of the external resistors, impedance matching was accomplished and higher voltage was obtained. Through the experiment of arrangement of harvesters on same shaft, possibility of multiplication of the generating power by increasing the number of harvesters was presented.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Innovative Energy Harvesting Technologies · Advanced Sensor and Energy Harvesting Materials · Wireless Power Transfer Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. 10.1016/S0140-3664(02)00248-710.1016/S0140-3664(02)00248-7 ↗
2. 10.1177/1045389X0505315110.1177/1045389X05053151 ↗
3. 10.1088/0957-0233/17/12/R0110.1088/0957-0233/17/12/R01 ↗
4. Lefeuvre E. · J Physique IV. · 2005 · 128 · 177
5. Shashank P. · Appl Phys Lett. · 2005 · 87 · 184101-1-3
6. Jun H.I. · J Kor Ins Electric Electron Mater Eng. · 2008 · 9 · 315
7. 10.1080/10584587.2012.66530310.1080/10584587.2012.665303 ↗
8. Phillips Components · Technical information · 2000 · 3
9. Uchino K · Lightning Source lnc · 2001 · 20 · 183
10. 10.5188/ijsmer.10.3410.5188/ijsmer.10.34 ↗