journal article·2014-07

Transverse impact characterization of carbon woven fabric-foam sandwich composites with carbon nanotubes

Pibo Ma, Fa Zhang, Gaoming Jiang, Zhe Gao, Dong Xia

Fibers and Polymers· Volume 15· Issue 7
Publisher page

Abstract

Different contents of carbon nanotubes were incorporated in an epoxy matrix that was then reinforced with carbon woven fabric and foam to manufacture the carbon woven fabric-foam sandwich composites. The transverse impact characterizations of the sandwich composites were reported. The split Hopkinson pressure bar apparatus were employed to test the transverse impact behaviors. The impact wave signals were recorded and the impact load versus displacement curves and impact damages of the sandwich composites were observed to analyze the energy absorption and the impact damage mechanisms. It was found that the failure area and energy absorption is increased as the increase of impact velocity and decrease of carbon nanotubes content. The main failure modes are foam breakage and the interface delamination between the woven fabric and foam.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Carbon Nanotubes in Composites · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Z. Tan, H. Luo, W. Long, and X. Han, Compos. Part B-Eng., 46, 39 (2013).10.1016/j.compositesb.2012.10.044 ↗
2. V. L. Tagarielli, V. S. Deshpande, and N. A. Fleck, Int. J. Solids Struct., 44, 2442 (2007).10.1016/j.ijsolstr.2006.07.015 ↗
3. B. Sun, D. Hu, and B. Gu, Compos. Part B-Eng., 40, 572 (2009).10.1016/j.compositesb.2008.12.005 ↗
4. J. Zhang, H. Hu, B. Sun, and B. Gu, J. Compos. Mater., 44, 157 (2010).10.1177/0021998309345328 ↗
5. M. Meo, R. Vignjevic, and G. Marengo, Int. J. Mech. Sci., 47, 1301 (2005).10.1016/j.ijmecsci.2005.05.006 ↗
6. Y. Luo, L. Lv, B. Sun, Y. Qiu, and B. Gu, Compos. Struct., 81, 202 (2007).10.1016/j.compstruct.2006.08.011 ↗
7. A. Hao, B. Sun, Y. Qiu, and B. Gu, Compos. Part A-Appl. S., 39, 1073 (2008).10.1016/j.compositesa.2008.04.012 ↗
8. L. Lee, K. Huang, and Y. Fann, J. Compos. Mater., 27, 1238 (1993).10.1177/002199839302701301 ↗
9. S. Khalili, M. Soroush, A. Davar, and O. Rahmani, Compos. Struct., 93, 1363 (2011).10.1016/j.compstruct.2010.10.003 ↗
10. P. M. Schubel, J. J. Luo, and I. M. Daniel, Compos. Part A-Appl. S., 36, 1389 (2005).10.1016/j.compositesa.2004.11.014 ↗
11. A. Allaoui, S. Bai, H. M. Cheng, and J. Bai, Compos. Sci. Technol., 62, 1993 (2002).10.1016/S0266-3538(02)00129-X ↗
12. M. S. Kim, S. E. Lee, W. J. Lee, and C. G. Kim, Adv. Compos. Mater., 18, 209 (2009).10.1163/156855109X428826 ↗
13. E. Soliman, M. Al-Haik, and M. R. Taha, J. Compos. Mater., 46, 1661 (2012).10.1177/0021998311422456 ↗
14. E. Soliman, M. Shyka, and M. R. Taha, Int. J. Impact Eng., 47, 39 (2012).10.1016/j.ijimpeng.2012.03.002 ↗
15. V. K. Srivastava, Materials & Design, 39, 432 (2012).10.1016/j.matdes.2012.02.039 ↗
16. A. Godara, L. Mezzo, F. Luizi, A. Warrier, S. V. Lomov, A. W. van Vuure, L. Gorbatikh, P. Moldenaers, and I. Verpoest, Carbon, 47, 2914 (2009).10.1016/j.carbon.2009.06.039 ↗
17. A. Godara, L. Gorbatikh, G. Kalinka, A. Warrier, O. Rochez, L. Mezzo, F. Luizi, A. Van Vuure, S. Lomov, and I. Verpoest, Compos. Sci. Technol., 70, 1346 (2010).10.1016/j.compscitech.2010.04.010 ↗
18. A. Tugrul Seyhan, M. Tanoglu, and K. Schulte, Eng. Fract. Mech., 75, 5151 (2008).10.1016/j.engfracmech.2008.08.003 ↗
19. P. Jindal, S. Pande, P. Sharma, V. Mangla, A. Chaudhury, D. Patel, B. P. Singh, R. B. Mathur, and M. Goyal, Compos. Part B-Eng., 45, 417 (2013).10.1016/j.compositesb.2012.06.018 ↗