Investigation by 3D Simulation of the Interaction of Fibers of a Multilayered Cellulose-Containing Material
Source abstract
Abstract
A method for controlling the parameters of a fibrous cellulose-containing material using the 3D microstructure is described. The developed method for studying the interaction of the fibers using 3D simulation can be used for prediction and quality control of paper and cardboard. The determined parameters include the volume and porosity, dimensions of the fibrous cellulose material, fiber volume, and uniformity of their distribution. The described method can also be used to predict to a certain degree the physicomechanical parameters from the 3D microstructure of samples of fibrous cellulose material, namely, from the estimated contact surface between the fibers and the dimensions of their distribution. The 3D model of the fibers was developed using a graphics program working with files. Microscopic sections of the fibrous composite material that were then digitized and separated by 5 μm were presented. Then, the Loft command of the graphics editor was used to extrude a plane and form a 3D body of fibrous composite that could produce a 3D model of the fibrous microstructure. An algorithm of actions to determine and predict the properties of the fibrous composite material by analyzing its 3D microstructure was derived.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Theoretical and Applied Studies in Material Sciences and Geometry · Material Properties and Applications · Material Properties and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. S. Song, S. Yuan, et al., BioResources, 13. No. 3, 6631-6641 (2018).10.15376/biores.13.3.6631-6641 ↗
2. E. Beznosova, E. Yu. Maronchuk, and U. Kasten, in: IIIrd International Scientific-Technical Conference “Mechanics Problems of Cellulose-Paper Materials” [in Russian], Arkhangelˆsk, 2015, pp. 76-81.
3. TAPPI Test Method T460 om-11 Air resistance of paper (Gurley method), Standard Specific Interest Group for this Test Method, Wisconsin, USA. 2006, 19 pp.
4. TAPPI Test Method T 541 om-89 Internal bond strength of paperboard (z-direction tensile), Wisconsin, USA, Standard Specific Interest Group for this Test Method, Wisconsin, USA, 2021, 4 pp.
5. A. Koubaa and Z. Koran, Tappi J., 78. No. 3, 103-111, March (1995).
6. P. G. Shlyakhtenko, V. P. Nefedov, et al., RU Pat. 2,463,578, "Method of controlling anisotropy of angular distribution of fibres in structure of flat fibrous material," Oct. 10, 2012
7. Byull. Izobret., No. 28, 12 (2012).10.1007/s15027-012-0147-7 ↗
8. DIN ISO 8791-4:2008-05 Paper and board – Determination of roughness/smoothness (air leak methods) – Part 4: Print-surf method (ISO 8791-4:2007), 26 pp.
9. A. A. Kirsankin, M. G. Mikhaleva, et al., Khim. Rastit. Syr’ya, No. 4, 159-163 (2016); DOI: https://doi.org/10.14258/jcprm.2016041415.10.14258/jcprm.2016041415 ↗
10. N. P. Midukov, V. S. Kurov, et al., RU Pat. 2,723,972, "Method of preparing a cross-section for controlling parameters of cellulose-containing material," Jun. 18, 2020
11. Byull. Izobret., No. 17, 22 (2020).10.1007/s11298-020-7931-y ↗
12. ISO 638 (Paper, board and pulps - Determination of dry matter content - Oven-drying method), International Organization for Standardization, Geneva, Switzerland. 2021, 10 pp.
13. ISO 4119 (Pulps - Determination of stock concentration), International Organization for Standardization, Geneva, Switzerland, 1995, 4 pp.
14. ISO 5263-1 (Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps), International Organization for Standardization, Geneva, Switzerland, 2004, 6 pp.
15. ISO 5264-2 (Pulps - Laboratory beating - Part 2: PFI mill method), International Organization for Standardization, Geneva, Switzerland, 2011, 11 pp.
16. ISO 16065-1 (Pulps - Determination of fibre length by automated optical analysis - Part 1: Polarized light method), International Organization for Standardization, Geneva, Switzerland, 2014, 4 pp.
17. ISO 5267-1 (Pulps - Determination of drainability - Part 1: Schopper-Riegler method), International Organization for Standardization, Geneva, Switzerland, 1999, 5 pp.
18. ISO 5269-2 (Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-Kothen method), International Organization for Standardization, Geneva, Switzerland, 2004, 11 pp.
19. Tescan: MIRA3 microscope. Download Brochure https://www.tescan-uk.com/tecnology/sem/mira3 (accessed Sept. 13, 2022).