Calculation of the Break Elongation of Knitted Fabric from Staple Yarn
Source abstract
Abstract
Experiments have shown that when the clamping length of yarn is reduced from 500 mm, as specified by the standard, to less than 10 mm, its breaking elongation sharply increases. The possibility of predicting the breaking elongation of yarn at a clamping length numerically equal to the height of the stitch row in warp knitted fabric is considered. Summing this characteristic with the maximum elongation of the stitch structure obtained on the basis of Dalidovich model allows the breaking elongation of knitted fabric to be calculated with sufficient accuracy. It is advisable to apply this method when designing technical fabrics that are subject to high loads.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Textile materials and evaluations · Engineering and Agricultural Innovations · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Z. A. Torkunova, Testing of Knitted Fabrics [in Russian], Legprombytizdat, Moscow (1985)
2. F. Krowatschek and R. Nestler R., Knitting Technology, 18 (4), 218–220 (1996).
3. N. I. Kashina, Designing knitted geogrids with specified operational properties, Extended Abstract of Cand. Sci. (Eng.) Dissertation, SPbGUTD, St. Petersburg (2014).
4. M. Popescu, L. Reiter, et al., Structures, No. 14, 322–332 (2018).10.1016/j.istruc.2018.03.001 ↗
5. S. E. Braddock-Clarke and M. O’Mahony, Techno Textiles, Thames and Hudson, New York (2006).
6. S. Kruger, Textile Architecture, Jovis Verlag GmbH, Berlin (2009).
7. B. Finessi, La Casa Morbida: Tra Arte E Design, Corrani, Mantova (2014).
8. A. S. Savel’eva and A. V. Truevtsev, Knitwear in Design. Design in Knitwear [in Russian], SPbGUPTD, St. Petersburg (2017).
9. V. A. Agapov and A. A. Karaseva, Kuryer Legk. Prom-ti, No. 3, 12–14 (2005).
10. A. S. Babkova, Development of a technology for manufacturing reflective surfaces for transformable antennas from metal knitted mesh fabrics with enlarged mesh sizes, Extended Abstract of Cand. Sci. (Eng.) Dissertation, A.N. Kosygin Russian State University, Moscow (2020).
11. A. V. Truevtsev, E. S. Tsobkallo, et al., Polymer Composites with Knitted Filler [in Russian], SPbGUPTD, St. Petersburg (2020). Available at: http://publish.sutd.m/tp_ext_inf_publish.php?id=2020157
12. A. S. Dalidovich, Technology of Knitwear Production [in Russian], Part 1, Gizlegprom, Moscow; Leningrad (1939).
13. A. I. Koblyakov, Structure and Mechanical Properties of Knitted Fabrics [in Russian], Legkaya Industriya, Moscow (1973).
14. A. S. Dalidovich, Theory of Weaves and Analysis of Knitwear [in Russian], Part 1, Gizlegprom, Moscow; Leningrad (1933).
15. A. V. Truevtsev, N. Yu. Nesterova, et al., Izv. Vyssh. Uchebn. Zaved., Tekhnol. Tekst. Prom-sti, No. 6, 10–13 (1994).
16. A. M. Stalevich and A. V. Truevtsev, Izv. Vyssh. Uchebn. Zaved., Tekhnol. Tekst. Prom-sti, No. 3, 10–13 (1996).
17. A. S. Nikolaeva, E. S. Tsobkallo, and A. V. Truevtsev, Innovative directions in the development of science on polymer fiber and composite materials: Abstracts of the II International Scientific Conference [in Russian], SPbGUPTD, St. Petersburg (2021). P. 100–101. Available at: https://elibrary.ru/item.asp?id=47504445