journal article·2021-06-30Open access

Characterisation of Interlock Knitted Fabric with Different Feed Patterns to Improve Thermal and Sensorial Comfort

Hafsa Jamshaid, Abdul Waqar Rajput, Bilal Zahid, Sajid Hussain

Fibres and Textiles in Eastern Europe· Volume 29· Issue 3(147)

Abstract

This study reports an investigation of the effect of different cellulose materials and yarn feeding patterns on thermo-physiological comfort, sensorial comfort, serviceability/pilling and ultraviolet properties. An interlock structure with a combination of hydrophilic and hydrophobic material was developed in such a way that each material was prominent in consecutive wales or courses. The yarn feed pattern in interlock fabric overcomes the limitation of plaited single jersey fabrics. Cellulose – based hydrophilic natural and regenerated fibres were used i.e cotton, model and viscose rayon, as well as hydrophobic synthetic fibre i.e. polyester for manufacturing fabric samples. By comparing the results, it became clear that wale-wise alternate yarns provide better overall moisture management properties than course-wise. Similarly, for fabric handle and pilling properties, wale-wise alternate yarn provides better properties. Interlock fabrics with the TransDRY® Technology effect are liable for use in protective textiles, medical textiles and in other functional textiles/children’s clothing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Textile materials and evaluations · Dyeing and Modifying Textile Fibers · Skin Protection and Aging

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Pakistan, Faisalabad, National Textile University, Faculty of Engineering & Technology, Protective Textile Group

Pakistan, Multan, BZU College of Textile Engineering, Technical Textile Research Group

Pakistan, Karachi, NED University of Engineering and Technology, Textile Engineering Department

Czech Republic, Technical University of Liberec, Faculty of Textile Engineering

References (18)

Show source-provided references
1. Spencer DJ. Knitting Technology: A Comprehensive Handbook and Practical Guide.Woodhead Publishing; 2001.10.1201/9781439833087 ↗
2. Majumdar A, Mukhopadhyay S, Yadav R. Thermal Properties of Knitted Fabrics madefrom Cotton and Regenerated Bamboo Cellulosic Fibres. International Journal of ThermalSciences 2010; 49(10): 2042-8.10.1016/j.ijthermalsci.2010.05.017 ↗
3. Majumdar A, Mukhopadhyay S, Yadav R, Mondal AK. Properties of Ring-Spun Yarnsmade from Cotton and Regenerated Bamboo Fibres, Indian Journal of Fibre & TextileResearch, 2011, Vol. 36, pp. 18-2.
4. Hussain T, Nazir A, Masood R. Liquid Moisture Management in Knitted Textiles – AReview. 3rd International Conference on Value Addition & Innovation in Textiles(Covitex-2015), Conference Proceedings, pp.15-26.
5. Oğlakcioğlu N, Marmaral A. Thermal Comfort Properties of Some Knitted Structures.FIBRES & TEXTILES in Eastern Europe 2007; 15, 5-6 (64 - 65): 94-96.
6. Fangueiro R, Filgueiras A, Soutinho F, Meidi X. Wicking Behavior And Drying CapabilityOf Functional Knitted Fabrics. Textile Research Journal 2010; 80(15): 1522-30.10.1177/0040517510361796 ↗
7. Gupta D, Kothari VK, Jhanji Y. Heat and Moisture Transport in Single Jersey PlatedFabrics, Indian Journal of Fibre & Textile Research, 2014, Vol. 39, pp. 115-121.
8. Ahmad HS, Jamshaid H. Development of Thermo-Physiologically Comfortable KnitStructure for Sports Application. Tekstil Ve Konfeksiyon 2019; 29(2):1 05-12.10.32710/tekstilvekonfeksiyon.570700 ↗
9. Marmarali AB. Dimensional and Physical Properties of Cotton/Spandex Single JerseyFabrics. Textile Research Journal 2003; 73(1): 11-4.10.1177/004051750307300102 ↗
10. Postle R. Dimentional Stability of Plain-Knitted Fabrics. Journal of the Textile Institute.1968; 59(2): 65-77.10.1080/00405006808659967 ↗
11. Das A, Alagirusamy R. Science in Clothing Comfort, Woodhead Publishing India PvtLimited; 2010.10.1201/9780367805609 ↗
12. Morton WE, Hearle JWS. Physical Properties of Textile Fibres, Woodhead Publishing; 2008 Chapter 6, Page 168-17710.1533/9781845694425.168 ↗
13. Yao B-g, Li Y, Hu J-y, Kwok Y-l, Yeung K-w. An Improved Test Method forCharacterizing the Dynamic Liquid Moisture Transfer in Porous Polymeric Materials.Polymer Testing 2006; 25(5): 677-89.10.1016/j.polymertesting.2006.03.014 ↗
14. Kawabata S, Niwa M. Fabric Performance in Clothing and Clothing Manufacture. Journalof the Textile Institute 1989; 80(1): 19-50.10.1080/00405008908659184 ↗
15. Uyanik S, Topalbekiroglu M. The Effect of Knit Structures with Tuck Stitches on FabricProperties and Pilling Resistance. The Journal of The Textile Institute 2017; 108(9):1584-9.10.1080/00405000.2016.1269394 ↗
16. Mongkholrattanasit R, Kryštůfek J, Wiener J, Viková M. Dyeing, Fastness, and UVProtection Properties of Silk and Wool Fabrics Dyed with Eucalyptus Leaf Extract by theExhaustion Process. FIBRES & TEXTILES in Eastern Europe 2011, 19, 3(86): 94-99.10.1080/00405001003722369 ↗
17. Prakash C, Ramakrishnan G, Koushik CV. Effect of Blend Proportion on MoistureManagement Characteristics of Bamboo/Cotton Knitted Fabrics. The Journal of TheTextile Institute 2013; 104: 12, 1320-1326.10.1080/00405000.2013.800378 ↗
18. Awadhesh Kumar Choudhary, Ramratan. The Influence of Yarn and Knit Structure onMoisture Management Properties of Sportswear Fabric. Journal of The Institution ofEngineers (India): Series E 2020; 101, June: 77–90.10.1007/s40034-020-00157-2 ↗