Source abstract
Abstract
ABSTRACT Stretchable organic solar cells (OSCs) hold significant promise as light‐harvesting power sources in wearable electronics. Physical blending highly‐deformable elastomer into rigid photovoltaic components represents a simple and effective approach to enhance film stretchability. However, the mechanical and photovoltaic performance of elastomer‐based active layers are generally inferior to those achieved through chemical approaches. Herein, we report a high‐performance stretchable active layer that combines photo crosslinking with sequential deposition of an elastomer‐based ternary system poly[2,6‐(4,8‐bis(5‐(2‐ethylhexyl‐3‐fluoro)thiophen‐2‐yl)‐benzo[1,2‐b:4,5‐b']dithiophene))‐alt‐5,5'‐(5,8‐bis(4‐(2‐butyloctyl)thiophen‐2‐yl)dithieno[3',2':3,4;2'',3'':5,6]benzo[1,2‐c][1,2,5]thiadiazole)] (D18)/2,2'‐((2Z,2'Z)‐((12,13‐bis(2‐ethylhexyl)‐3,9‐diundecyl‐12,13‐dihydro‐[1,2,5]thiadiazolo[3,4‐e]thieno[2'',3'':4',5']thieno[2',3':4,5]pyrrolo[3,2‐g]thieno[2',3':4,5]thieno[3,2‐b]indole‐2,10‐diyl)bis(methanylylidene)bis(5,6‐difluoro‐3‐oxo‐2,3‐dihydro‐1H‐indene‐2,1‐diylidene))dimalonitrile) (Y6): polystyrene‐block‐poly(ethylene‐ran‐butylene)‐block‐polystyrene (SEBS), achieving a power conversion efficiency of 15.38% and a crack‐onset strain of 35.91%. Crosslinking D18 with an azide compound ethane‐1,2‐diyl bis(4‐azido‐2,3,5,6‐tetrafluorobenzoate) (2BX) in the bottom layer not only produces a 3D covalent network, but also results in a low‐crystallinity film with a reduced glass transition temperature. These structure changes contribute to delayed large‐scale chain slippage and enhanced strain energy dissipation, leading to approximately 100% and 40% improvements in the stretchability of D18 film and full active layer. Moreover, the charge generation and transport behaviors are just slightly affected with moderate microstructure change, enabling the device to retain 94% of initial efficiency. Ultimately, the optimal active layer achieves an efficiency‐stretchability factor of 5.52%, ranking among the highest reported values for stretchable active layer systems.
Source: crossref · Quality: baseline
Affiliations
Shaanxi Key Laboratory for Advanced Energy Devices Shaanxi Engineering Lab for Advanced Energy Technology Institute for Advanced Energy Materials School of Materials Science and Engineering Shaanxi Normal University Xi'an China
School of Chemistry and Environmental Engineering Changchun University of Science and Technology Changchun China
Institute of High Energy Physics Chinese Academy of Sciences Beijing China
State Key Laboratory of Polymer Science and Technology Changchun Institute of Applied Chemistry Chinese Academy of Sciences Changchun China
Funding
National Natural Science Foundation of China · Fundamental Research Funds for the Central Universities