journal article·2026-07Open access

Plastic deformation and failure of TMCP S1100 ultrahigh-strength steel at elevated temperatures

Mehran Ghafouri, Shahriar Afkhami, Aki-Petteri Pokka, Vahid Javaheri, Jari Larkiola, Masoud Moshtaghi, Timo Björk, Tuomas Skriko

Fire Safety Journal· Volume 162

Abstract

This study investigates the influence of temperature on the plastic deformation and hardening behavior of Thermo-Mechanical Controlled Process (TMCP) S1100 ultrahigh-strength steel at different temperatures up to 900 °C. TMCP steels, recognized for their reduced carbon footprint and superior strength-to-weight ratio, are increasingly prevalent in structural engineering applications, necessitating a thorough assessment of their performance under fire conditions. The Swift and Voce constitutive models were evaluated for their efficacy in predicting plastic deformation across various temperatures. While both models captured the general stress–strain response, inconsistencies were observed at low and high strain levels. To address these limitations, a coupled Swift–Voce model was employed, yielding a more robust correlation between plastic strain and stress at elevated temperatures. Microstructural analyses clarified key hardening mechanisms, including dislocation multiplication, dynamic strain aging, dynamic recovery, martensite decomposition, and austenite formation, over the temperature range from room temperature to 900 °C. The observed agreement between the Voce and Kocks-Mecking models, both sensitive to microstructural evolution, substantiates the reliability of the derived correlations between the microstructure and hardening parameters. Finally, equations were proposed to establish the relationship between plastic deformation parameters and deformation temperature. These insights advance the understanding of TMCP S1100’s applicability for fire-resistant structural applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fire effects on concrete materials · High Temperature Alloys and Creep · Engineering and Material Science Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Steel all over the world: estimating in-use stocks of iron for 200 countries10.1016/j.resconrec.2012.11.008 ↗
2. Performance and design issues for high strength steel in structures10.1260/1369-4332.13.3.403 ↗
3. Ultrahigh-strength steels at elevated temperatures10.1016/j.jcsr.2021.106739 ↗
4. Constitutive description of tensile flow behavior of cold flow-formed AFNOR 15CDV6 steel at different deformation levels10.1007/s11665-014-1127-0 ↗
5. Strengthening of duplex stainless steel processed by equal channel angular pressing (ECAP)10.1007/s00170-022-10311-2 ↗
6. Mechanical properties of TMCP Q690 high strength structural steel at elevated temperatures10.1016/j.firesaf.2020.103190 ↗
7. Effect of temperature on the plastic flow and strain hardening of direct-quenched ultra-high strength steel S960MC10.1016/j.tws.2023.111319 ↗
8. Elevated-temperature mechanical properties of high strength structural steel S460N: experimental study and recommendations for fire-resistance design10.1016/j.firesaf.2012.10.008 ↗
9. High temperature mechanical properties of high strength structural steels Q550, Q690 and Q89010.1007/s10694-018-0760-9 ↗
10. Elevated temperature tensile behavior of S900 HSLA steel and its welded joints10.1016/j.jcsr.2023.107782 ↗
11. Mechanical properties and design recommendations of very high strength steel S960 in fire10.1016/j.engstruct.2016.01.008 ↗
12. Mechanical properties of butt-welded ultra-high strength steels at elevated temperatures10.1016/j.jcsr.2022.107499 ↗
13. A review: plastic analysis in structures10.1108/WJE-06-2023-0218 ↗
14. Fire design of steel columns: effects of thermal gradients10.1016/j.jcsr.2013.10.023 ↗
15. Performance-based structural fire engineering of steel building structures: traveling fires10.3389/fbuil.2022.907237 ↗
16. Strain hardening behavior and microstructural evolution during plastic deformation of dual phase, non-grain oriented electrical and AISI 304 steels10.1016/j.msea.2016.12.094 ↗
17. High strength-elongation balance in ultrafine grained ferrite-martensite dual phase steels developed by thermomechanical processing10.1016/j.msea.2019.06.031 ↗
18. Devising strain hardening models using kocks–mecking plots—A comparison of model development for titanium aluminides and case hardening steel10.3390/met6090204 ↗
19. Tensile deformation
20. Modified stress-strain relation for FCC metals and alloys10.1007/BF02813258 ↗
21. Plastic instability under plane stress10.1016/0022-5096(52)90002-1 ↗
22. The relationship between stress and strain for homogeneous deformations
23. A constitutive model and data for metals subjected to large strain, high strain rates and high temperatures
24. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
25. Influence of temperature and post weld heat treatment on tensile stress–strain and work hardening behaviour of modified 9Cr–1Mo steel10.1016/j.matdes.2013.05.020 ↗
26. Comparison among different constitutive equations on investigating tensile plastic behavior and microstructure in austempered ductile iron10.7494/jcme.2018.2.1.14 ↗
27. Hot tensile deformation behaviors and constitutive model of 42CrMo steel10.1016/j.matdes.2013.06.070 ↗
28. Strain hardening behavior of nanostructured dual-phase steel processed by severe plastic deformation10.1016/j.jallcom.2010.02.109 ↗
29. Constitutive model on the description of plastic behavior of DP600 steel at strain rate from 10−4 to 103 s−110.1016/j.commatsci.2009.01.025 ↗
30. Mechanical properties and microstructural evaluation of the heat-affected zone in ultra-high strength steels10.1016/j.tws.2020.107072 ↗
31. Thermomechanical simulation of the heat-affected zones in welded ultra-high strength steels: microstructure and mechanical properties10.1016/j.matdes.2021.110336 ↗
32. Hot tensile properties and strain hardening behaviour of super 304HCu stainless steel10.1016/j.jmrt.2016.05.004 ↗
33. Modeling and numerical validation of stress-strain curves of maraging steels, grades 300 and 350 under hydrogen embrittlement10.1590/1980-5373-mr-2020-0431 ↗
34. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
35. ASTM E8/E8M - 16ae1 standard test methods for tension testing of metallic materials, (n.d.). https://www.astm.org/Standards/E8 (accessed December 21, 2020).
36. Correlation between engineering stress-strain and true stress-strain curve10.12691/ajcea-2-1-6 ↗
37. Strain hardening behavior of a friction stir welded magnesium alloy10.1016/j.scriptamat.2007.08.001 ↗
38. Applicability of voce equation for tensile flow and work hardening behaviour of P92 ferritic steel10.1016/j.ijpvp.2015.05.004 ↗
39. The evolution of recrystallization textures in body centred cubic metals10.1016/S1359-6454(98)00052-4 ↗
40. On the study of tensile and strain hardening behavior of a thermomechanically treated ferritic stainless steel10.1016/j.msea.2016.04.050 ↗
41. Relevant aspects of carbon and low alloy steel metallurgy
42. High‐temperature tensile and wear behaviour of microalloyed medium carbon steel10.1108/00368790510601699 ↗
43. Hot deformation and dynamic restoration10.1016/B978-008044164-1/50017-7 ↗
44. Dynamic recrystallization of ferrite in a low carbon steel during hot rolling in the (F+A) two-phase region10.1016/0956-716X(94)90575-4 ↗
45. Recovery during annealing in a cold rolled low carbon steel. Part I: kinetics and microstructural characterization10.1016/j.actamat.2004.04.019 ↗
46. Hall-petch breakdown at elevated temperatures10.2320/matertrans.MA201309 ↗
47. Tensile properties and strain-hardening behavior of double-sided arc welded and friction stir welded AZ31B magnesium alloy10.1016/j.msea.2010.01.031 ↗
48. Tempered martensite embrittlement in SAE 4340 steel10.1007/BF02811697 ↗
49. Influence of strain rate and temperature on tensile stress–strain and work hardening behaviour of 9Cr–1Mo ferritic steel10.1016/j.msea.2011.12.109 ↗
50. Comparative tensile flow and work hardening behaviour of thin section and forged thick section 9Cr–1Mo ferritic steel in the framework of voce equation and kocks–mecking approach10.1016/j.jnucmat.2012.06.046 ↗
51. Tensile flow and work hardening behavior of hot cross-rolled AA7010 aluminum alloy sheets10.1016/j.msea.2013.03.079 ↗
52. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
53. Mechanical properties and constitutive model of Q690 steel in the fire-cooling stage10.1016/j.firesaf.2023.103994 ↗
54. Mechanical properties of very high strength steel at elevated temperatures10.1016/j.firesaf.2014.01.006 ↗
55. Experimental study on mechanical properties of Q690D high strength steel during the cooling stage of fire10.1016/j.firesaf.2022.103639 ↗