journal article·2023-09Open access

A Novel Al–Cu Composite with Ultra‐High Strength at 350 °C via Dual‐Phase Particle Reinforced Submicron‐Structure

Kewei Xie, Jinfeng Nie, Chang Liu, Wenhao Cha, Ge Wu, Xiangfa Liu, Sida Liu

Advanced Science· Volume 10· Issue 25

Abstract

Abstract Thermal stability determines a material's ability to maintain its performance at desired service temperatures. This is especially important for aluminum (Al) alloys, which are widely used in the commercial sector. Herein, an ultra‐strong and heat‐resistant Al‐Cu composite is fabricated with a structure of nano‐AlN and submicron‐Al2O3 particles uniformly distributed in the matrix. At 350 °C, the (8.2AlN+1Al2O3)p/Al‐0.9Cu composite achieves a high strength of 187 MPa along with a 4.6% ductility under tension. The high strength and good ductility benefit from strong pinning effect on dislocation motion and grain boundary sliding by uniform dispersion of nano‐AlN particles, in conjunction with the precipitation of Guinier–Preston (GP) zones, enhancing strain hardening capacity during plastic deformation. This work can expand the selection of Al–Cu composites for potential applications at service temperatures as high as ≈350 °C.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory for Liquid‐Solid Structural Evolution and Processing of Materials Ministry of Education Shandong University Jinan 250061 China

Nano and Heterogeneous Materials Center School of Materials Science and Engineering Nanjing University of Science and Technology Nanjing 210094 China

Center for Alloy Innovation and Design (CAID) State Key Laboratory for Mechanical Behavior of Materials Xi'an Jiaotong University Xi'an 710049 China

Faculty of Georesources and Materials Engineering RWTH Aachen University 52056 Aachen Germany

Center for Advancing Materials Performance from the Nanoscale and Hysitron Applied Research Center in China State Key Laboratory for Mechanical Behavior of Materials Xi'an Jiaotong University Xi'an 710049 China

Laboratory for multiscale mechanics and medical science SV LAB School of Aerospace Xi'an Jiaotong University Xi'an 710049 China

Funding

National Natural Science Foundation of China

References (30)

Show source-provided references
1. 10.1126/science.aav708610.1126/science.aav7086 ↗
2. 10.1016/j.pmatsci.2021.10079310.1016/j.pmatsci.2021.100793 ↗
3. 10.1016/j.actamat.2003.08.02310.1016/j.actamat.2003.08.023 ↗
4. 10.1016/j.corsci.2019.10818410.1016/j.corsci.2019.108184 ↗
5. 10.1016/j.jallcom.2019.15178810.1016/j.jallcom.2019.151788 ↗
6. 10.1088/1757-899X/13/1/01201010.1088/1757-899X/13/1/012010 ↗
7. 10.1016/j.actamat.2010.10.01710.1016/j.actamat.2010.10.017 ↗
8. 10.1007/s11661-017-3986-010.1007/s11661-017-3986-0 ↗
9. 10.1016/j.msea.2019.13844010.1016/j.msea.2019.138440 ↗
10. 10.1016/j.msea.2019.13879410.1016/j.msea.2019.138794 ↗
11. 10.1103/PhysRevB.80.18411110.1103/PhysRevB.80.184111 ↗
12. 10.1016/j.actamat.2009.05.00710.1016/j.actamat.2009.05.007 ↗
13. 10.1007/s11106-013-9467-010.1007/s11106-013-9467-0 ↗
14. 10.1038/am.2015.12910.1038/am.2015.129 ↗
15. 10.1016/j.matpr.2017.11.56410.1016/j.matpr.2017.11.564 ↗
16. 10.1038/s41467-019-12047-210.1038/s41467-019-12047-2 ↗
17. 10.1016/j.addma.2019.10091010.1016/j.addma.2019.100910 ↗
18. 10.1016/j.actamat.2018.10.05910.1016/j.actamat.2018.10.059 ↗
19. 10.1016/j.matchar.2020.11067210.1016/j.matchar.2020.110672 ↗
20. 10.1007/978-3-658-09941-110.1007/978-3-658-09941-1 ↗
21. 10.1007/s11661-019-05511-710.1007/s11661-019-05511-7 ↗
22. Liu Q. · J. Mater. Eng. · 2016 · 44 · 20
23. 10.1016/j.msea.2019.13884010.1016/j.msea.2019.138840 ↗
24. 10.1016/j.msea.2017.10.04910.1016/j.msea.2017.10.049 ↗
25. 10.1016/j.msea.2017.08.11410.1016/j.msea.2017.08.114 ↗
26. 10.1016/j.msea.2015.03.02110.1016/j.msea.2015.03.021 ↗
27. 10.1088/2053-1591/aadbee10.1088/2053-1591/aadbee ↗
28. 10.1016/j.actamat.2013.06.03610.1016/j.actamat.2013.06.036 ↗
29. 10.1016/j.actamat.2014.04.02710.1016/j.actamat.2014.04.027 ↗
30. 10.1016/S0304-3991(98)00035-710.1016/S0304-3991(98)00035-7 ↗