journal article·2025-03Open access

Flame Retarded Adhesive Tapes and Their Influence on the Fire Behavior of Bonded Parts

Vitus Hupp, Bernhard Schartel, Kerstin Flothmeier, Andreas Hartwig

Fire Technology· Volume 61· Issue 2

Abstract

Abstract Pressure-sensitive adhesive tapes are used in automotives, railway vehicles and construction, where flame retardancy is of major importance. This is why industrial applicants often buy, and industrial tape manufacturers often produce, flame-retardant adhesive tapes, advertised for their good flammability characteristics. Yet, how flame-retardant tapes influence the fire behavior of bonded materials is a rather open question. To investigate this issue, three different substrates were bonded, using eight double-sided adhesive tapes containing two different carriers and two different flame retardants. The bonded substrates were compared to their monolithic counterparts in terms of flammability, fire behavior and fire stability. The fire behavior of adhesive tape bonded materials differed significantly from the monolithic substrates. The usage of different adhesive tapes let to different burning behavior of the bonded materials mainly due to different carrier systems. In contrast, the implementation of flame retardant into the adhesive had rather minor or no effect on the burning behavior of the bonded substrates despite their positive effect on the flammability of the free-standing tape. The carrier changed the HRR curve in the cone calorimeter and was able to both, reduce and increase fire hazards. Using the carrier with the better fire performance can lower the fire growth rate by 20%, the peak of heat release rate by 27%, and the maximum average rate of heat emission by 30% in cone calorimeter tests. Overall, the fire behavior of bonded materials is a complex interaction between substrate, adhesive, and carrier, and depends on the fire scenario the materials are exposed to.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Flame retardant materials and properties · Fire dynamics and safety research · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Bethke C, Weber L, Goedderz D, Standau T, Doring M, Altstadt V (2020) Fire behavior of flame retarded sandwich structures containing PET foam cores and epoxy face sheets. Polym Compos 41(12):5195–5208. https://doi.org/10.1002/pc.2578610.1002/pc.25786 ↗
2. Dietenberger MA, Shalbafan A, Welling J (2018) Cone calorimeter testing of foam core sandwich panels treated with intumescent paper underneath the veneer (FRV). Fire Mater 42(3):296–305. https://doi.org/10.1002/fam.249210.1002/fam.2492 ↗
3. Gallo E, Schartel B, Acierno D, Cimino F, Russo P (2013) Tailoring the flame retardant and mechanical performances of natural fiber-reinforced biopolymer by multi-component laminate. Compos Part B-Eng 44(1):112–119. https://doi.org/10.1016/j.compositesb.2012.07.00510.1016/j.compositesb.2012.07.005 ↗
4. Yu Z, Liu J, Zhang Y, Luo J, Lu C, Pan B (2015) Thermo-oxidative degradation behavior and fire performance of high impact polystyrene/magnesium hydroxide/microencapsulated red phosphorus composite with an alternating layered structure. Polym Degrad Stab 115:54–62. https://doi.org/10.1016/j.polymdegradstab.2015.02.01510.1016/j.polymdegradstab.2015.02.015 ↗
5. Wang Z-H, Liu B-W, Zeng F-R, Lin X-C, Zhang J-Y, Wang X-L, Wang Y-Z, Zhao H-B. (2022) Fully recyclable multifunctional adhesive with high durability, transparency, flame retardancy, and harsh-environment resistance. Sci Adv 8(50):eadd8527. https://doi.org/10.1126/sciadv.add8527.10.1126/sciadv.add8527 ↗
6. Zeng Y, Yang W, Xu P, Cai X, Dong W, Chen M, Du M, Liu T, Jan Lemstra P, Ma P (2022) The bonding strength, water resistance and flame retardancy of soy protein-based adhesive by incorporating tailor-made core–shell nanohybrid compounds. Chem Eng J 428:132390. https://doi.org/10.1016/j.cej.2021.13239010.1016/j.cej.2021.132390 ↗
7. Pang H, Ma C, Shen Y, Sun Y, Li J, Zhang S, Cai L, Huang Z (2021) Novel bionic soy protein-based adhesive with excellent prepressing adhesion, flame retardancy, and mildew resistance. ACS Appl Mater Interfaces 13(32):38732–38744. https://doi.org/10.1021/acsami.1c1100410.1021/acsami.1c11004 ↗
8. Tirri T, Aubert M, Wilén C-E, Pfaendner R, Hoppe H (2012) Novel tetrapotassium azo diphosphonate (INAZO) as flame retardant for polyurethane adhesives. Polym Degrad Stab 97(3):375–382. https://doi.org/10.1016/j.polymdegradstab.2011.12.00510.1016/j.polymdegradstab.2011.12.005 ↗
9. Wu MT, Song W, Wu YZ, Qu W (2020) Preparation and characterization of the flame retardant decorated plywood based on the intumescent flame retardant adhesive. Materials 13(3)676. https://doi.org/10.3390/ma13030676.10.3390/ma13030676 ↗
10. Tang Y, Wang D-Y, Jing X-K, Ge X-G, Yang B, Wang Y-Z (2008) A formaldehyde-free flame retardant wood particleboard system based on two-component polyurethane adhesive. J Appl Polym Sci 108(2):1216–1222. https://doi.org/10.1002/app.2766210.1002/app.27662 ↗
11. Zhu Z-M, Xu Y-J, Liao W, Xu S, Wang Y-Z (2017) Highly flame retardant expanded polystyrene foams from phosphorus–nitrogen–silicon synergistic adhesives. Ind Eng Chem Res 56(16):4649–4658. https://doi.org/10.1021/acs.iecr.6b0506510.1021/acs.iecr.6b05065 ↗
12. Frangi A, Fontana M, Hugi E, Jobstl R (2009) Experimental analysis of cross-laminated timber panels in fire. Fire Saf J 44(8):1078–1087. https://doi.org/10.1016/j.firesaf.2009.07.00710.1016/j.firesaf.2009.07.007 ↗
13. Li KY, Li YJ, Zou YY, Yuan BH, Walsh A, Carradine D (2023) Improving the fire performance of structural insulated panel core materials with intumescent flame-retardant epoxy resin adhesive. Fire Technol 59(1):29–51. https://doi.org/10.1007/s10694-021-01203-010.1007/s10694-021-01203-0 ↗
14. Son M, Kim J, Oh M, Kim D, Choi HJ, Lee K, Chung K, Lee S (2023) Phosphorus-based flame retardant acrylic pressure sensitive adhesives with superior peel strength and transfer characteristics. Prog Org Coat 185:107931. https://doi.org/10.1016/j.porgcoat.2023.10793110.1016/j.porgcoat.2023.107931 ↗
15. Bifulco A, Varganici CD, Rosu L, Mustata F, Rosu D, Gaan S. (2022) Recent advances in flame retardant epoxy systems containing non-reactive DOPO based phosphorus additives. Polym Degrad Stab, 200109962. https://doi.org/10.1016/j.polymdegradstab.2022.109962.10.1016/j.polymdegradstab.2022.109962 ↗
16. Wang H, Li S, Zhu ZM, Yin XZ, Wang LX, Weng YX, Wang XY (2021) A novel DOPO-based flame retardant containing benzimidazolone structure with high charring ability towards low flammability and smoke epoxy resins. Polym Degrad Stab 183:109426. https://doi.org/10.1016/j.polymdegradstab.2020.10942610.1016/j.polymdegradstab.2020.109426 ↗
17. Artner J, Ciesielski M, Ahlmann M, Walter O, Doring M, Perez RM, Altstadt V, Sandler JKW, Schartel B (2007) A novel and effective synthetic approach to 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) derivatives. Phosphorus Sulfur Silicon Relat Elem 182(9):2131–2148. https://doi.org/10.1080/1042650070140741710.1080/10426500701407417 ↗
18. Perret B, Schartel B, Stoss K, Ciesielski M, Diederichs J, Doring M, Kramer J, Altstadt V (2011) Novel DOPO-based flame retardants in high-performance carbon fibre epoxy composites for aviation. Eur Polymer J 47(5):1081–1089. https://doi.org/10.1016/j.eurpolymj.2011.02.00810.1016/j.eurpolymj.2011.02.008 ↗
19. Pawlowski KH, Schartel B (2007) Flame retardancy mechanisms of triphenyl phosphate, resorcinol bis(diphenyl phosphate) and bisphenol bis(diphenyl phosphate) in polycarbonate/acrylonitrile-butadiene-styrene blends. Polym Int 56(11):1404–1414. https://doi.org/10.1002/pi.229010.1002/pi.2290 ↗
20. Liu SM, Jiang L, Jiang ZJ, Zhao JQ, Fu Y (2011) The impact of resorcinol bis(diphenyl phosphate) and poly(phenylene ether) on flame retardancy of PC/PBT blends. Polym Adv Technol 22(12):2392–2402. https://doi.org/10.1002/pat.177510.1002/pat.1775 ↗
21. Jang Y-M, Yu C-J, Choe K-S, Choe C-H, Kim C-H (2021) Preparation and flame retardant properties of cotton fabrics treated with resorcinol bis(diphenyl phosphate). Cellulose 28(7):4455–4467. https://doi.org/10.1007/s10570-021-03780-310.1007/s10570-021-03780-3 ↗
22. Dukarski W, Krzyżanowski P, Gonsior M, Rykowska I (2021) Flame retardancy properties and physicochemical characteristics of polyurea-based coatings containing flame retardants based on aluminum hydroxide, resorcinol bis(diphenyl phosphate), and tris chloropropyl phosphate. Materials 14(18):516810.3390/ma14185168 ↗
23. Hupp V, Schartel B, Flothmeier K, Hartwig A (2024) Fire behavior of pressure-sensitive adhesive tapes and bonded materials. Fire Mater 48(1):114–127. https://doi.org/10.1002/fam.317110.1002/fam.3171 ↗
24. Schartel B, Bartholmai M, Knoll U (2005) Some comments on the use of cone calorimeter data. Polym Degrad Stab 88(3):540–547. https://doi.org/10.1016/j.polymdegradstab.2004.12.01610.1016/j.polymdegradstab.2004.12.016 ↗
25. Zhang J, Koubaa A, Xing D, Godard F, Li P, Tao Y, Wang X-M, Wang H (2021) Fire retardancy, water absorption, and viscoelasticity of borated wood—polycarbonate biocomposites. Polymers 13(14):223410.3390/polym13142234 ↗
26. Xu Q, Hofmeyer H, Maljaars J, van Herpen RAP (2023) Full-scale fire resistance testing and two-scale simulations of sandwich panels with connections. Fire Technol. https://doi.org/10.1007/s10694-023-01463-y10.1007/s10694-023-01463-y ↗
27. Hull TR (2008) 11—Challenges in fire testing: reaction to fire tests and assessment of fire toxicity. In: Horrocks AR, Price D (eds) Advances in Fire Retardant Materials. Woodhead Publishing, pp 255–29010.1533/9781845694701.2.255 ↗
28. Schartel B, Hull TR (2007) Development of fire-retarded materials—Interpretation of cone calorimeter data. Fire Mater 31(5):327–354. https://doi.org/10.1002/fam.94910.1002/fam.949 ↗
29. Seah DGJ, Dasari A (2023) Understanding the influence of melt dripping on UL94 test response in a PA11 system. Polym Testing 118:107893. https://doi.org/10.1016/j.polymertesting.2022.10789310.1016/j.polymertesting.2022.107893 ↗
30. Turski Silva Diniz A, Huth C, Schartel B. (2020) Dripping and decomposition under fire: Melamine cyanurate vs. glass fibres in polyamide 6. Polym Degrad Stab 171:109048. https://doi.org/10.1016/j.polymdegradstab.2019.109048.10.1016/j.polymdegradstab.2019.109048 ↗
31. Borysiuk P, Jaskolowski W, Boruszewski P, Jenczyk-Tolleczko I, Jablonski M, Bylinski D (2011) Ignitability of wood impregnated with fireproof agent based on diammonium hydrogen phosphate, citric acid and sodium benzoate. Forest Wood Technol 73:181–185
32. Lin C-F, Karlsson O, Mantanis G, Sandberg D. (2020) Fire performance and leach resistance of pine wood impregnated with guanyl-urea phosphate/boric acid and a melamine-formaldehyde resin. Euro J Wood Wood Prod 78. https://doi.org/10.1007/s00107-019-01483-y.10.1007/s00107-019-01483-y ↗
33. Batiot B, Luche J, Rogaume T (2014) Thermal and chemical analysis of flammability and combustibility of fir wood in cone calorimeter coupled to FTIR apparatus. Fire Mater 38(3):418–431. https://doi.org/10.1002/fam.219210.1002/fam.2192 ↗
34. Paál M, Rychlý J, Vykydalová A, Šurina I, Lisý A, Brezová V, Nemčeková K, Labuda J (2023) Burning and thermal degradation of wood under defined conditions: a route of preparation of carbonaceous char and its characterization for potential applicability in evaluation of real fire. Fire Technol 59(5):2733–2749. https://doi.org/10.1007/s10694-023-01422-710.1007/s10694-023-01422-7 ↗
35. Maraveas C, Miamis K, Matthaiou CE (2015) Performance of timber connections exposed to fire: a review. Fire Technol 51(6):1401–1432. https://doi.org/10.1007/s10694-013-0369-y10.1007/s10694-013-0369-y ↗
36. Hou J, Cai Z, Lu K (2017) Cone calorimeter evaluation of reinforced hybrid wood–aluminum composites. J Fire Sci 35(2):118–131. https://doi.org/10.1177/073490411668371710.1177/0734904116683717 ↗
37. Wang W, Zammarano M, Shields JR, Knowlton ED, Kim I, Gales JA, Hoehler MS, Li J (2018) A novel application of silicone-based flame-retardant adhesive in plywood. Constr Build Mater 189:448–459. https://doi.org/10.1016/j.conbuildmat.2018.08.21410.1016/j.conbuildmat.2018.08.214 ↗
38. Luche J, Rogaume T, Richard F, Guillaume E (2011) Characterization of thermal properties and analysis of combustion behavior of PMMA in a cone calorimeter. Fire Saf J 46(7):451–461. https://doi.org/10.1016/j.firesaf.2011.07.00510.1016/j.firesaf.2011.07.005 ↗
39. Babrauskas V (2002) Chpt. 3-1. Heat release rates. In: Walton D (eds) The SFPE handbook of fire protection engineering. 3rd ed. National FireProtection Association Inc., USA
40. Schartel B, Braun U, Knoll U, Bartholmai M, Goering H, Neubert D, Pötschke P (2008) Mechanical, thermal, and fire behavior of bisphenol a polycarbonate/multiwall carbon nanotube nanocomposites. Polym Eng Sci 48(1):149–158. https://doi.org/10.1002/pen.2093210.1002/pen.20932 ↗
41. Vahabi H, Eterradossi O, Ferry L, Longuet C, Sonnier R, Lopez-Cuesta JM (2013) Polycarbonate nanocomposite with improved fire behavior, physical and psychophysical transparency. Eur Polymer J 49(2):319–327. https://doi.org/10.1016/j.eurpolymj.2012.10.03110.1016/j.eurpolymj.2012.10.031 ↗
42. Hu Z, Chen L, Zhao B, Luo Y, Wang D-Y, Wang Y-Z (2011) A novel efficient halogen-free flame retardant system for polycarbonate. Polym Degrad Stab 96(3):320–327. https://doi.org/10.1016/j.polymdegradstab.2010.03.00510.1016/j.polymdegradstab.2010.03.005 ↗