Post-fire Structural Properties of Hot-Rolled and Cold-Rolled Duplex Stainless Steel Reinforcing Bar
Source abstract
Abstract
This paper is concerned with the behaviour of duplex stainless steel reinforcing bar following exposure to elevated temperatures from a fire followed by subsequent cooling. The study focuses on duplex grade 1.4362 reinforcing bar, and includes both hot-rolled and cold-rolled variants. Grade 1.4362 duplex stainless steel reinforcement has become a popular choice for reinforced concrete owing to its excellent combination of outstanding mechanical behaviour and corrosion resistance as well as cost-effectiveness. There is no information on the post-fire performance of duplex 1.4362 reinforcing bar available, despite being necessary for an engineer that may wish to study the structural integrity of a relevant structure following a fire. To address this gap in the existing knowledge, this paper presents a detailed discussion and analysis based on a series of laboratory experiments comprising mechanical and metallurgical testing. It is shown that grade 1.4362 duplex stainless steel reinforcing bars perform unlike any other types of carbon steel or austenitic stainless steel rebars, owing to the austenite-ferrite grain boundary, and the associated instabilities. Based on the results presented in this paper, a series of recommendations are proposed for the post-fire mechanical property retention factors that can be used in assessment and design. Finally, this paper aims to highlight the potential for rehabilitation and salvage of existing reinforced concrete structures following a fire, and aid in the prevention of unnecessary demolition and replacement.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Steel-Sci (2021) Properties of Stainless Steel Rebar. https://www.stainlesssteelrebar.org/stainless-properties/.Accessed 18 May 2021
2. Government of Canada (2021) Pont Samuel-De Champlain—Foire aux questions. https://www.infrastructure.gc.ca/nbsl-npsl/faq-fra.html#q1. Accessed 18 May 2021
3. worldstainless.org (2019) Samuel De Champlain Bridge—ISSF Stainless Steel in Bridges, worldstainless.org
4. worldstainless.org (2016) River Delta Crossing—ISSF Stainless Steel in Infrastrucutre, worldstainless.org
5. Mondal R, Rajapgopal A, Bonagani S, Prakash A, Fuloria D, Sivaprasad P, Chai G, Kain V, Samajdar I (2020) Solution annealing of super duplex stainless steel: correlating corrosion performance with grain size and phase-specific chemistry. Metall Mater Trans 51:2480–249410.1007/s11661-020-05672-w ↗
6. Cardoso JL, Pacheco MS, Araujo A, Riberio J (2018) Stainless steel rebar for marine environment: study of galvanic corrosion with carbon steel rebars used in the same concrete structure
7. Bertolini L, Gastaldi M (2011) Corrosion resistance of low-nickel duplex stainless steel rebars. Mater Corros 62(2):120–12910.1002/maco.201005774 ↗
8. Gardner L, Bu Y, Francis P, Baddoo NR, Cashell KA, McCann F (2016) Elevated tempreture material properties of stainless steel reinforcing bar. Constr Build Mater 114:977–99710.1016/j.conbuildmat.2016.04.009 ↗
9. Rehman F, Cashell KA, Anguliano L (2022) Experimental study of the post-fire mechanical and material response of cold-worked austenitic stainless steel reinforcing bar. Materials 15:156410.3390/ma15041564 ↗
10. Felicetti R, Gambarova PG, Meda A (2009) Residual behavior of steel rebars and R/C sections after a fire. Constr Build Mater 23:3546–355510.1016/j.conbuildmat.2009.06.050 ↗
11. Tao Z, Wang X-Q, Hassan MK, Song T-Y, Xie L-A (2018) Behavior of three types of stainless steel after exposure to elevated temperatures. J Constr Steel Res 152:296–31110.1016/j.jcsr.2018.02.020 ↗
12. Pramanik BA, Kumar A (2015) Stainless steel: microstructure, mechanical properties and methods of application, Nova
13. Beddos J, Parr JG (1999) Introduction to Stainless Steel, 3rd edn. ASM International, Washington
14. International Stainless Steel Forum (2020) The Stainless Steel Family. ISSF
15. BS EN 10088-1 (2014) Stainless Steel Part 1: List of stainless steels. British Standards Institute
16. Rodrigues DG, Maria GGB, Viana BAL, Santos DB (2019) Effect of low cold-rolling strain on microstructure, texture, phase transformation, and mechanical properties of 2304 lean duplex stainless steel. Mater Charact 150:138–14910.1016/j.matchar.2019.02.011 ↗
17. Danieli Group (2021) SN Longos reconfirms its confidence in Danieli Rebar-in-Coil Technology, Accessed 25 Nov 2015. https://www.danieli.com/en/news/news-events/sn-longos-reconfirms-its-confidence-danieli-rebar-coil-technology_37_18.htm. Accessed 2021
18. BS 6744:2016 (2016) Stainless Steel Bars—Reinforcement of concrete—requirements and test methods. British Standard Institute
19. Twilt L (1988) Strength and deformation properties of steel at elevated temperatures. Fire Saf J 13:9–1510.1016/0379-7112(88)90028-8 ↗
20. BS 6892-1:2016 (2016) Metallic materials—Tensile testing, Part 1: method of test at room temperature. British Standard Institute
21. Bruker (2021) The Swiss Army Knife of the X-ray Diffractionist. https://www.bruker.com/en/products-and-solutions/diffractometers-and-scattering-systems/x-ray-diffractometers/diffrac-suite-software/diffrac-eva.html. Accessed Oct 7 2021
22. Hansen N (2004) Hall–Petch relation and boundary strengthening. Scripta Mater 51(8):801–80610.1016/j.scriptamat.2004.06.002 ↗
23. Alinejad H, Abbasi M (2021) Effects of precipitated phases on the magnetic properties of 2304 duplex stainless steel. J Magn Magn Mater 537:16824410.1016/j.jmmm.2021.168244 ↗
24. Dehghan-Manshadi A, Barnett MR, Hodgson PD (2013) Microstructure evolution during hot deformation of duplex stainless steel. Mater Sci Technol 23(12):1478–148410.1179/174328407X239019 ↗
25. Eurocode 2 (2004) Design of concrete structures—Part 1-1: general rules and rules for buildings, CEN