journal article·2016-01

Validation of Fire Models Applied to Nuclear Power Plant Safety

Kevin McGrattan, Richard Peacock, Kristopher Overholt

Fire Technology· Volume 52· Issue 1
Publisher page

Abstract

The paper highlights key components of a fire model validation study conducted by the U.S. Nuclear Regulatory Commission and the Electric Power Research Institute. These include the selection of fire phenomena of interest to nuclear power plant safety, the selection of appropriate models, the selection of relevant experimental data, and the selection of appropriate evaluation criteria. For each model and each quantity of interest, there are two metrics of accuracy. The first is a bias factor, which indicates the extent to which the model tends to over or under-predict the given quantity. The second is a relative standard deviation, which indicates the degree of scatter in the predicted quantity when compared with experimental measurements. While the study is motivated by nuclear power plant safety, the general procedure and results are appropriate for most industrial applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire dynamics and safety research · Combustion and Detonation Processes · Wind and Air Flow Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. National Fire Protection Association (2012) Quincy, NFPA 5000: Building Construction and Safety Code
2. National Fire Protection Association (2001) Quincy, NFPA 805: Performance-based standard for fire protection for light-water reactor electric generating plants
3. Stroup D, Lindeman A (2013) Verification and validation of selected fire models for nuclear power plant applications. NUREG-1824, supplement 1, United States Nuclear Regulatory Commission, Washington, DC
4. Iqbal N, Salley M, Fire Dynamics Tools (FDTs): (2004) Quantitative fire hazard analysis methods for the U.S. Nuclear Regulatory Commission Fire Protection Inspection Program. NUREG-1805, United States Nuclear Regulatory Commission, Washington, DC
5. Walton W, Thomas P (2008) SFPE handbook of fire protection engineering. In: Estimating temperatures in compartment fires, 4th edn. National Fire Protection Association, Quincy
6. Heskestad G (2008) SFPE handbook of fire protection engineering. In: Fire plumes, flame height and air entrainment, 4th edn. National Fire Protection Association, Quincy
7. McCaffrey B (1979) Purely buoyant diffusion flames: some experimental results. NBSIR 79–1910, National Bureau of Standards (now NIST), Gaithersburg10.6028/NBS.IR.79-1910 ↗
8. Alpert R (2008) SFPE handbook of fire protection engineering. In: Ceiling jet flows, 4th edn. National Fire Protection Association, Quincy
9. Beyler C (2008) SFPE handbook of fire protection engineering. In: Flammability limits of premixed and diffusion flames, 4th edn. National Fire Protection Association, Quincy
10. Nowlen S, Wyant F, McGrattan K (2008) Cable response to live fire (CAROLFIRE). NUREG/CR 6931, United States Nuclear Regulatory Commission, Washington, DC10.6028/NIST.IR.7472 ↗
11. Mowrer F. (2008) SFPE handbook of fire protection engineering In: Enclosure smoke filling and fire-generated environmental conditions, 4th edn. National Fire Protection Association, Quincy
12. Evans D, Madrzykowski D (1981) Characterizing the thermal response of fusible-link sprinklers. NBSIR 81–2329, National Bureau of Standards (now NIST), Gaithersburg10.6028/NBS.IR.81-2329 ↗
13. Heskestad G, Delichatsios M (1977) Environments of fire detectors—Phase 1: Effects of fire size, ceiling height and material. Tech. Rep. NBS GCR 77–86 and NBS GCR 77–95, National Bureau of Standards (now NIST), Gaithersburg
14. Peacock RD, Forney GP, Reneke PA (2011) CFAST—Consolidated model of fire growth and smoke transport (Version 6): Technical Reference Guide. Special Publication 1026, National Institute of Standards and Technology, Gaithersburg
15. McGrattan K, Hostikka S, McDermott R, Floyd J, Weinschenk C, Overholt K (2013) Fire dynamics simulator, Technical Reference Guide. National Institute of Standards and Technology, Gaithersburg, and VTT Technical Research Centre of Finland, Espoo, 6th edn. Vol. 1: Mathematical Model; Vol. 2: Verification Guide; Vol. 3: Validation Guide; Vol. 4: Configuration Management Plan10.6028/NIST.SP.1018e6 ↗
16. American Society for Testing and Materials, West Conshohocken, Pennsylvania, ASTM E1355–12, Standard Guide for Evaluating the Predictive Capabilities of Deterministic Fire Models (2012)
17. Sheppard D, Klein B (2009) Burn tests in two story structure with hallways. Tech. rep, ATF Laboratories, Ammendale
18. Fleury R (2010) Evaluation of thermal radiation models for fire spread between objects. Master’s thesis, University of Canterbury, Christchurch
19. Nowlen S (1987) Enclosure environment characterization testing for the baseline validation of computer fire simulation codes. NUREG/CR-4681 (SAND86-1296), Sandia National Laboratory, Albuqueque, New Mexico. Work performed under contract to the US Nuclear Regulatory Agency, Washington DC
20. Chavez J, Nowlen S (1988) An experimental investigation of internally ignited fires in nuclear power plant control cabinets, Part II: Room effects tests. NUREG/CR-4527 (SAND86-0336), Sandia National Laboratory, Albuqueque, New Mexico . Work performed under contract to the US Nuclear Regulatory Agency, Washington DC
21. Foote K (1987) 1986 LLNL Enclosure Fire Tests Data Report. Tech. Rep. UCID-21236, Lawrence Livermore National Laboratory
22. Peacock R, Davis S, Lee W (1988) An experimental sata set for the accuracy assessment of room fire models. NBSIR 88–3752, National Bureau of Standards (now NIST), Gaithersburg10.6028/NBS.IR.88-3752 ↗
23. Hamins A, Maranghides A, Johnsson R, Donnelly M, Yang G, Mulholland G, Anleitner R (2006) Report of Experimental Results for the International Fire Model Benchmarking and Validation Exercise 3. NIST Special Publication 1013–1, National Institute of Standards and Technology, Gaithersburg, Maryland . Joint Publication of NIST and the US Nuclear Regulatory Commission (NUREG/CR-6905)10.6028/NIST.SP.1013-1 ↗
24. Bukowski R, Peacock R, Averill J, Cleary T, Bryner N, Walton W, Reneke P, Kuligowski E (2008) Performance of home smoke alarms analysis of the response of several available technologies in residential fire settings. NIST Technical Note 1455–1, National Institute of Standards and Technology, Gaithersburg10.6028/NIST.TN.1455-1r2008 ↗
25. Wickström U, Jansson R, Tuovinen H (2009) Verification fire tests on using the adiabatic surface temperature for predicting heat transfer. Tech. Rep. 2009:19, SP Technical Research Institute of Sweden, B $$\mathring{\rm 0}$$ 0 ˚ ras, Sweden
26. Steckler K, Quintiere J, Rinkinen W (1982) Flow induced by fire in a compartment. NBSIR 82–2520, National Bureau of Standards (now NIST), Gaithersburg10.6028/NBS.IR.82-2520 ↗
27. Opert K (2012) Assessment of natural vertical ventilation for smoke and hot gas layer control in a residential scale structure. Master’s thesis, University of Maryland, College Park
28. Sheppard D, Steppan D (1997) Sprinkler, heat & smoke vent, draft curtain project—Phase 1 Scoping tests. Tech. rep. Underwriters Laboratories, Northbrook
29. McGrattan K, Hamins A, Stroup D (1988) Sprinkler, smoke & heat vent, draft curtain interaction—large scale experiments and model development. NISTIR 6196–1, National Institute of Standards and Technology, Gaithersburg
30. Gott J, Lowe D, Notarianni K, Davis W (1997) Analysis of high bay hangar facilities for fire detector sensitivity and placement. NIST Technical Note 1423, National Institute of Standards and Technology, Gaithersburg10.6028/NIST.TN.1423 ↗
31. Vettori R (1998) Effect of an obstructed ceiling on the activation time of a residential sprinkler. NISTIR 6253, National Institute of Standards and Technology, Gaithersburg10.6028/NIST.IR.6253 ↗
32. Vettori R (2003) Effect of a beamed, sloped, and sloped beamed ceilings on the activation time of a residential sprinkler. NISTIR 7079, National Institute of Standards and Technology, Gaithersburg10.6028/NIST.IR.7079 ↗
33. Hostikka S, Kokkala M, Vaari J (2001) Experimental study of the localized room fires. VTT Research Notes 2104, VTT Technical Research Centre of Finland, Espoo
34. Hamins A, Maranghides A, McGrattan K, Johnsson E, Ohlemiller T, Donnelly M, Yang J, Mulholland G, Prasad K, Kukuck S, Anleitner R, McAllister T (2005) Federal building and fire safety investigation of the world trade center disaster: experiments and modeling of structural steel elements exposed to fire. NIST NCSTAR 1–5B, National Institute of Standards and Technology, Gaithersburg10.6028/NIST.NCSTAR.1-5bv1 ↗
35. Peacock R, Reneke P, Davis W, Jones W (1999) Quantifying fire model evaluation using functional analysis. Fire Saf. J 33:16710.1016/S0379-7112(99)00029-6 ↗
36. McGrattan K, Toman B (2011) Quantifying the predictive uncertainty of complex numerical models. Metrologia 48:17310.1088/0026-1394/48/3/011 ↗