Advanced Methods for Determining the Origin of Vapor Cloud Explosions Case Study: The 2006 Danvers Explosion Investigation
Source abstract
Abstract
Gas dispersion and explosion dynamics can be very complex. Blast effects in the far field are less sensitive to the local dynamics of an explosion event, and simplified techniques have been developed to roughly estimate the amount of fuel involved (i.e., energy released) in an explosion based on the observed damage in the far field. However, these simple techniques are not suitable to predict the complex explosion dynamics that occur in the near field. The phenomena that drive explosions and resulting damage in the near field are complex in nature, as they depend on non-linear interactions between multiple variables (e.g., ignition location, flame accelerations due to object interaction, fuel reactivity, geometry of the facility regarding confinement and interconnected rooms, vent areas, etc.). Furthermore, the damage created in the near field by overpressure development, blast wave reflections and focusing, pressure impulse, pressure piling, blast wind and ensuing drag forces, may be difficult to interpret using simple methods. The origin of an explosion may, in fact, differ from the intuitive epicenter determined from oversimplified assumptions and may lead to incorrect conclusions regarding the cause and origin or initiating events of the accident. State-of-the-art 3D modeling tools, such as FLACS, are typically required to understand and evaluate complex explosions. FLACS was specifically developed to predict the consequences associated with complex explosions, especially in the near field, and has been extensively validated against hundreds of full-scale experiments. Therefore, FLACS simulations can be used to investigate the chain of events of the explosion and provide a more complete understanding of the evidence, including near-field blast damage. This paper presents the findings of how FLACS was used to help determine the explosion origin in the explosion that occurred at an ink and paint manufacturing facility in Danvers, Massachusetts, on November 22, 2006. This paper is not intended to provide complete investigation findings and will only provide the necessary background material to follow the explosion origin analysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Combustion and Detonation Processes · Structural Response to Dynamic Loads · Fire dynamics and safety research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Davis SG, Hansen OR (2010) New investigation findings on the 2006 Danvers, MA explosion. J Loss Prev Process Ind 23(2):194–21010.1016/j.jlp.2009.10.007 ↗
2. CSB Investigation Report (2008). 2007-03-I-MA, May 2008
3. Lees FP (1996) Loss prevention in the process industries, 2nd edn. Elsevier, Butterworth
4. Harris RJ (1983) The investigation and control of gas explosions in buildings and heating plant. British Gas Corporation, London
5. Hansen OR, Renoult J, Bakke JR (2001) Explosion risk assessment: how the results vary with the approach chosen. In: Proceedings of Mary Kay O’ Connor Process Safety Symposium, pp 395–410
6. Hansen OR, Talberg O, Bakke JR (1999) CFD-based methodology for quantitative gas explosion risk assessment in congested process areas: examples and validation status. International Conference and Workshop on Modelling the Consequences of Accidental Releases of Hazardous Materials. AIChE, Centre of Chemical Process Safety, pp 457–477
7. NORSOK Z-013 (2010) Risk and emergency preparedness analysis. Norsok standard. Available from Standard Norge, Postboks 242, N-1326 Lysaker, Norway
8. Hjertager BH (1985) Computer simulation of turbulent reactive gas dynamics. J Model Identif Control 5:211–23610.4173/mic.1984.4.3 ↗
9. Launder BE, Spalding DB (1974) The numerical computation of turbulent flows. 2. s.l. Comput Methods Appl Mech Eng 3:269–28910.1016/0045-7825(74)90029-2 ↗
10. Patankar SV (1980) Numerical heat transfer and fluid flow. Hemisphere Publications, New York
11. Abdel-Gayed RG, Bradley D, Lawes M (1987) Turbulent burning velocities: a general correlation in terms of straining rates. Proc R Soc Lond A 414:389–41310.1098/rspa.1987.0150 ↗
12. Bray KNC (1990) Studies of the turbulent burning velocity. Proc R Soc Lond A 431:315–33510.1098/rspa.1990.0133 ↗
13. Arntzen BJ (1998) Modeling of turbulence and combustion for simulation of gas explosions in complex geometries. PhD thesis, NTNU, Trondheim, Norway. ISBN 82-471-0358-3
14. Bjerketvedt D, Bakke JR, van Wingerden K (1997) Gas explosion handbook. J Hazard Mater 52:1–15010.1016/S0304-3894(97)81620-2 ↗
15. Hansen OR, Storvik I, van Wingerden K (1999) Validation of CFD-models for gas explosions, where FLACS is used as example: model description and experiences and recommendations for model evaluation. In: Proceedings of the European Meeting on Chemical Industry and Environment III Krakow, Poland, pp. 365–382
16. Mercx WPM (1994) Modelling and experimental research into gas explosions. Overall report of the MERGE project, CEC contract: STEP-CT-0111 (SSMA)
17. Catlin CA, Gregory CAJ, Johnson DM, Walker DG (1993) Explosion mitigation in offshore modules by general area deluge. Trans IChemE 71, Part B
18. Hjertager BH, Bjørkhaug M, Fuhre K (1988) Explosion propagation of non-homogeneous methane-air clouds inside an obstructed 50 m3 vented vessel. J Hazard Mater 19:139–15310.1016/0304-3894(88)85045-3 ↗
19. Hjertager BH, Fuhre K, Bjørkhaug M (1988) Gas explosion experiments in 1:33 and 1:5 scale offshore separator and compressor modules using stoichiometric homogeneous fuel/air clouds. J Loss Prev Process Ind 1:197–20510.1016/0950-4230(88)85004-6 ↗
20. Selby C, Burgan B (1998) Blast and fire engineering for topside structures, phase 2, final summary report. Steel Construction Institute, UK. Publication number 253
21. Al-Hassan T, Johnson DM (1998) Gas explosions in large scale offshore module geometries: overpressures, mitigation and repeatability. Presented at OMAE-98, Lisbon, Portugal
22. Johnson DM, Cleaver RP, Puttock JS, van Wingerden CJM (2002) Investigation of gas dispersion and explosions in offshore modules. OTC paper 14134, Houston10.4043/14134-MS ↗
23. Zipf RK, Sapko MJ, Brune JF (2007) Explosion pressure design criteria for new seals in U.S. coal mines. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. DHHS (NIOSH) Publication No. 2007-144, Information Circular 9500, pp 1–76
24. Middha P, Hansen OR (2009) Using computational fluid dynamics as a tool for hydrogen safety studies. J Loss Prev Process Ind 22:295–30210.1016/j.jlp.2008.10.006 ↗
25. Middha P, Hansen OR (2008) Predicting deflagration to detonation transition in hydrogen explosions. Process Saf Prog 27:192–20410.1002/prs.10242 ↗
26. van den Berg AC (1985) The multi-energy method: a framework for vapour cloud explosion blast prediction. J Hazard Mater 12:1–1010.1016/0304-3894(85)80022-4 ↗
27. Pierorazio AJ, Thomas JK, Baker QA, Ketchum DE (2005) An update to the Baker-Strehlow-Tang vapor cloud explosion prediction methodology flame speed table. Process Saf Prog 24(1):59–6510.1002/prs.10048 ↗
28. van Wingerden CJM, Hansen OR, Teigland R (1995) Prediction of the strength of blast waves in the surroundings of vented offshore modules. In: Fourth international conference of offshore structures-hazards, safety and engineering working in the new era, London, England, 12–13 December
29. van Wingerden K, Hansen OR, Foisselon P (1999) Predicting blast over pressures caused by vapor cloud explosions in the vicinity of control rooms. Proc Saf Prog 18:14–1710.1002/prs.680180105 ↗
30. Hansen OR, Hinze P, Engel D, Davis S (2010) Using computational fluid dynamics (CFD) for blast wave predictions. J Loss Prev Process Ind 23:885–90610.1016/j.jlp.2010.07.005 ↗
31. Hansen OR, Wilkins B (2003) Oil mist explosions in a test channel. In 37th Annual Loss Prevention, symposium, New Orleans
32. Davis SG, Law CK (1998) Determination of and fuel structure effects on laminar flame speeds of C1 to C8 hydrocarbons. Combust Sci Technol 140:427–49910.1080/00102209808915781 ↗