journal article·2023-05

Research on the Reversible and Irreversible Heat Generation of LiNi1−x−yCoxMnyO2-Based Lithium-Ion Batteries

Qiaoping Zhang, Fanglin Wei, Peng Zhang, Ruize Dong, Jiaxin Li, Pengzhao Li, Qiurong Jia, Yanxia Liu, Jing Mao, Guosheng Shao

Fire Technology· Volume 59· Issue 3
Publisher page

Abstract

Accidents involving fires and explosions caused by lithium-ion battery thermal runaway have severely hampered the development of electric vehicles. With the purpose of improving the safety of battery operation and avoiding thermal runaway of lithium-ion batteries. This work conducts a full-scale heat generation quantitative test of two types of LiNi1−x−yCoxMnyO2-based commercial batteries by measuring the voltage-temperature coefficient (dE/dT) and the overpotential using the galvanostatic intermittent titration technique (GITT). Results indicate that that the heat generation rates of the two types of batteries exhibit similar trends. Battery heat generation is a function of C-rate, temperature and state of charge. Among them, C-rate is the most important influencing factor. The reversible heat contribution is the most significant at higher temperatures and lower C-rates. In most cases, the irreversible heat accounts for the dominant contribution to the total heat generation. The contribution of heat generation due to mass transport limitation is dominant among irreversible heat, and it is more significantly affected by temperature and state of charge, whereas the ohmic contribution shows a minor impact. The detailed analysis of the reversible and irreversible heat generation can provide effective theoretical guidance for safety warning and fire protection of lithium-ion battery systems, minimize the probability of the risk of fire accidents of the lithium-ion battery.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advanced Battery Materials and Technologies · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Bandhauer TM, Garimella S, Fuller TF (2014) Temperature-dependent electrochemical heat generation in a commercial lithium-ion battery. J Power Sources 247:618–628. https://doi.org/10.1016/j.jpowsour.2013.08.01510.1016/j.jpowsour.2013.08.015 ↗
2. Liu K, Li K, Peng Q, Zhang C (2018) A brief review on key technologies in the battery management system of electric vehicles. Front Mech Eng 14(1):47–64. https://doi.org/10.1007/s11465-018-0516-810.1007/s11465-018-0516-8 ↗
3. Rezaei A, Burl JB, Zhou B (2018) Estimation of the ECMS equivalent factor bounds for hybrid electric vehicles. IEEE Trans Control Syst Technol 26(6):2198–220510.1109/TCST.2017.2740836 ↗
4. Plötz P, Funke SÁ, Jochem P (2018) Empirical fuel consumption and CO2 emissions of plug-in hybrid electric vehicles. J Ind Ecol 22(4):773–78410.1111/jiec.12623 ↗
5. Xia L, Miao H, Wang F, Zhang C, Wang J, Zhao J, Yuan J (2021) Investigation of fluorinated ether-containing electrolytes for high energy-density nickel-rich LiNi0.8Co0.1Mn0.1O2 electrodes. Int J Energy Res 45(7):9936–9947. https://doi.org/10.1002/er.648810.1002/er.6488 ↗
6. Liu X, Ren D, Hsu H, Feng X, Xu G-L, Zhuang M, Gao H, Lu L, Han X, Chu Z, Li J, He X, Amine K, Ouyang M (2018) Thermal runaway of lithium-ion batteries without internal short circuit. Joule 2(10):2047–2064. https://doi.org/10.1016/j.joule.2018.06.01510.1016/j.joule.2018.06.015 ↗
7. Feng XN, Ouyang MG, Liu X, Lu LG, Xia Y, He XM (2018) Thermal runaway mechanism of lithium ion battery for electric vehicles: a review. Energy Storage Mater 10:246–267. https://doi.org/10.1016/j.ensm.2017.05.01310.1016/j.ensm.2017.05.013 ↗
8. Lopez CF, Jeevarajan JA, Mukherjee PP (2015) Experimental analysis of thermal runaway and propagation in lithium-ion battery modules. J Electrochem Soc 162(9):A1905–A1915. https://doi.org/10.1149/2.0461809jes10.1149/2.0461809jes ↗
9. Feng X, Zheng S, Ren D, He X, Wang L, Cui H, Liu X, Jin C, Zhang F, Xu C, Hsu H, Gao S, Chen T, Li Y, Wang T, Wang H, Li M, Ouyang M (2019) Investigating the thermal runaway mechanisms of lithium-ion batteries based on thermal analysis database. Appl Energy 246:53–64. https://doi.org/10.1016/j.apenergy.2019.04.00910.1016/j.apenergy.2019.04.009 ↗
10. Hu Z, He X, Restuccia F, Rein G (2020) Numerical study of self-heating ignition of a box of lithium-ion batteries during storage. Fire Technol 56(6):2603–2621. https://doi.org/10.1007/s10694-020-00998-810.1007/s10694-020-00998-8 ↗
11. Li H, Peng W, Yang X, Chen H, Sun J, Wang Q (2020) Full-scale experimental study on the combustion behavior of lithium ion battery pack used for electric vehicle. Fire Technol 56(6):2545–2564. https://doi.org/10.1007/s10694-020-00988-w10.1007/s10694-020-00988-w ↗
12. Liang C, Jiang L, Wang Q, Sun J (2020) Dynamic heat generation of LiNi0.5Co0.2Mn0.3O2 half cell under cycling based on an in situ micro-calorimetry. Fire Technol 56(6):2387–2404. https://doi.org/10.1007/s10694-020-00956-410.1007/s10694-020-00956-4 ↗
13. Sun P, Bisschop R, Niu H, Huang X (2020) A review of battery fires in electric vehicles. Fire Technol 56(4):1361–1410. https://doi.org/10.1007/s10694-019-00944-310.1007/s10694-019-00944-3 ↗
14. Wang Q, Wen J, Stoliarov S (2020) Special issue on lithium battery fire safety. Fire Technol 56(6):2345–2347. https://doi.org/10.1007/s10694-020-01048-z10.1007/s10694-020-01048-z ↗
15. Nagourney T, Jordan J, Marsh L, Scardino D, May BM (2021) The implications of post-fire physical features of cylindrical 18650 lithium-ion battery cells. Fire Technol 57(4):1707–1722. https://doi.org/10.1007/s10694-020-01077-810.1007/s10694-020-01077-8 ↗
16. Yan H, Marr KC, Ezekoye OA (2021) Towards fire forensic characteristics of failed cylindrical format lithium-ion cells and batteries. Fire Technol 57(4):1723–1752. https://doi.org/10.1007/s10694-020-01079-610.1007/s10694-020-01079-6 ↗
17. Bernardi D, Pawlikowski E, Newman J (1984) A general energy balance for battery systems. J Electrochem Soc 132(1):5–12. https://doi.org/10.1149/1.211379210.1149/1.2113792 ↗
18. Thomas KE, Newman J (2003) Heats of mixing and of entropy in porous insertion electrodes. J Power Sources 119–121:844–849. https://doi.org/10.1016/S0378-7753(03)00283-010.1016/S0378-7753(03)00283-0 ↗
19. Mao J, Tiedemann W, Newman J (2014) Simulation of temperature rise in Li-ion cells at very high currents. J Power Sources 271:444–454. https://doi.org/10.1016/j.jpowsour.2014.08.03310.1016/j.jpowsour.2014.08.033 ↗
20. Feng X, Zheng S, Ren D, He X, Wang L, Liu X, Li M, Ouyang M (2019) Key characteristics for thermal runaway of Li-Ion batteries. Energy Procedia 158:4684–4689. https://doi.org/10.1016/j.egypro.2019.01.73610.1016/j.egypro.2019.01.736 ↗
21. Liu P, Li Y, Mao B, Chen M, Huang Z, Wang Q (2021) Experimental study on thermal runaway and fire behaviors of large format lithium iron phosphate battery. Appl Therm Eng 192:116949–116961. https://doi.org/10.1016/j.applthermaleng.2021.11694910.1016/j.applthermaleng.2021.116949 ↗
22. Huang Z, Li X, Wang Q, Duan Q, Li Y, Li L, Wang Q (2021) Experimental investigation on thermal runaway propagation of large format lithium ion battery modules with two cathodes. Int J Heat Mass Transf 172:121077–121090. https://doi.org/10.1016/j.ijheatmasstransfer.2021.12107710.1016/j.ijheatmasstransfer.2021.121077 ↗
23. Liu B, Jia Y, Yuan C, Wang L, Gao X, Yin S, Xu J (2020) Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: a review. Energy Storage Mater 24:85–112. https://doi.org/10.1016/j.ensm.2019.06.03610.1016/j.ensm.2019.06.036 ↗
24. Liu B, Jia Y, Li J, Yin S, Yuan C, Hu Z, Wang L, Li Y, Xu J (2018) Safety issues caused by internal short circuits in lithium-ion batteries. J Mater Chem A 6(43):21475–21484. https://doi.org/10.1039/C8TA08997C10.1039/C8TA08997C ↗
25. Lu WQ, Yang H, Prakash J (2006) Determination of the reversible and irreversible heats of LiNi0.8Co0.2O2/mesocarbon microbead Li-ion cell reactions using isothermal microcalorimetery. Electrochim Acta 51(7):1322–132910.1016/j.electacta.2005.06.028 ↗
26. Jalkanen K, Aho T, Vuorilehto K (2013) Entropy change effects on the thermal behavior of a LiFePO4/graphite lithium-ion cell at different states of charge. J Power Sources 243:354–360. https://doi.org/10.1016/j.jpowsour.2013.05.19910.1016/j.jpowsour.2013.05.199 ↗
27. Viswanathan VV, Choi D, Wang D, Xu W, Towne S, Williford RE, Zhang J-G, Liu J, Yang Z (2010) Effect of entropy change of lithium intercalation in cathodes and anodes on Li-ion battery thermal management. J Power Sources 195(11):3720–3729. https://doi.org/10.1016/j.jpowsour.2009.11.10310.1016/j.jpowsour.2009.11.103 ↗
28. Heubner C, Schneider M, Michaelis A (2016) Detailed study of heat generation in porous LiCoO2 electrodes. J Power Sources 307:199–207. https://doi.org/10.1016/j.jpowsour.2015.12.09610.1016/j.jpowsour.2015.12.096 ↗
29. Gunnarshaug AF, Vie PJS, Kjelstrup S (2021) Review—reversible heat effects in cells relevant for lithium-ion batteries. J Electrochem Soc 168(5):050522–050540. https://doi.org/10.1149/1945-7111/abfd7310.1149/1945-7111/abfd73 ↗
30. Mao J, Zhang P, Liu X, Shao G, Dai K (2020) Entropy change characteristics of the LiNi0.5Mn1.5O4 cathode material for lithium-ion batteries. ACS Omega 5:4109–411410.1021/acsomega.9b03794 ↗
31. Bai Y, Li L, Li Y, Chen G, Zhao H, Wang Z, Wu C, Ma H, Wang X, Cui H, Zhou J (2019) Reversible and irreversible heat generation of NCA/Si–C pouch cell during electrochemical energy-storage process. J Energy Chem 29:95–102. https://doi.org/10.1016/j.jechem.2018.02.01610.1016/j.jechem.2018.02.016 ↗
32. Liang C, Jiang L, Ye S, Wang Z, Wei Z, Wang Q, Sun J (2021) Precise in-situ and ex-situ study on thermal behavior of LiNi1/3Co1/3Mn1/3O2/graphite coin cell: from part to the whole cell. J Energy Chem 54:332–341. https://doi.org/10.1016/j.jechem.2020.06.00810.1016/j.jechem.2020.06.008 ↗
33. Zhao W, Rohde M, Mohsin IU, Ziebert C, Seifert HJ (2020) Heat generation in NMC622 coin cells during electrochemical cycling: separation of reversible and irreversible heat effects. Batteries 6(4):55–66. https://doi.org/10.3390/batteries604005510.3390/batteries6040055 ↗
34. Lin CJ, Xu SC, Liu JL (2018) Measurement of heat generation in a 40 Ah LiFePO4 prismatic battery using accelerating rate calorimetry. Int J Hydrogen Energy 43(17):8375–8384. https://doi.org/10.1016/j.ijhydene.2018.03.05710.1016/j.ijhydene.2018.03.057 ↗
35. Bai Y, Li L, Li Y, Chen G, Zhao H, Wang Z, Wu C, Ma H, Wang X, Cui H, Zhou J (2019) Reversible and irreversible heat generation of NCA/Si–C pouch cell during electrochemical energy-storage process. J Energy Chem 29(02):95–102. https://doi.org/10.1016/j.jechem.2018.02.01610.1016/j.jechem.2018.02.016 ↗
36. Cano ZP, Banham D, Ye S, Hintennach A, Lu J, Fowler M, Chen Z (2018) Batteries and fuel cells for emerging electric vehicle markets. Nat Energy 3(4):279–28910.1038/s41560-018-0108-1 ↗
37. Needell ZA, McNerney J, Chang MT, Trancik JE (2016) Potential for widespread electrification of personal vehicle travel in the United States. Nat Energy 1(9):1611210.1038/nenergy.2016.112 ↗
38. Du S, Lai Y, Ai L, Ai L, Cheng Y, Tang Y, Jia M (2017) An investigation of irreversible heat generation in lithium ion batteries based on a thermo-electrochemical coupling method. Appl Therm Eng 121:501–510. https://doi.org/10.1016/j.applthermaleng.2017.04.07710.1016/j.applthermaleng.2017.04.077 ↗
39. Gu WB, Wang CY (2000) Thermal-electrochemical modeling of battery systems. J Electrochem Soc 147(8):2910–2922. https://doi.org/10.1149/1.139362510.1149/1.1393625 ↗
40. Jalkanen K, Vuorilehto K (2015) Entropy change characteristics of LiMn0.67Fe0.33PO4 and Li4Ti5O12 electrode materials. J Power Sources 273:351–359. https://doi.org/10.1016/j.jpowsour.2014.09.09110.1016/j.jpowsour.2014.09.091 ↗
41. Al Hallaj S, Maleki H, Hong JS, Selman JR (1999) Thermal modeling and design considerations of lithium-ion batteries. J Power Sources 83(1–2):1–8. https://doi.org/10.1016/S0378-7753(99)00178-010.1016/S0378-7753(99)00178-0 ↗
42. Yang H, Prakash J (2004) Determination of the reversible and irreversible heats of a LiNi0.8Co0.15Al0.05O2/natural graphite cell using electrochemical-calorimetric technique. J Electrochem Soc 151(8):A1222–A1229. https://doi.org/10.1149/1.176577110.1149/1.1765771 ↗
43. Heubner C, Schneider M, Michaelis A (2017) Heat generation rates of NaFePO4 electrodes for sodium-ion batteries and LiFePO4 electrodes for lithium-ion batteries: a comparative study. J Solid State Electrochem 22(4):1099–1108. https://doi.org/10.1007/s10008-017-3828-410.1007/s10008-017-3828-4 ↗
44. Wen CJ, Boukamp BA, Huggins RA, Weppner W (2019) Thermodynamic and mass transport properties of “ LiAl .” J Electrochem Soc 126(12):2258–2266. https://doi.org/10.1149/1.212893910.1149/1.2128939 ↗
45. Xu X, Wang H, Lu S, Peng S, Xiang Y (2016) A phosphotungstic acid self-anchored hybrid proton exchange membrane for direct methanol fuel cells. RSC Adv 6(49):43049–43055. https://doi.org/10.1039/C6RA07318B10.1039/C6RA07318B ↗
46. Li X, Zhang J, Shen L, Ma Y, Lei W, Cui Q, Zou G (2008) Preparation and characterization of graphitic carbon nitride through pyrolysis of melamine. Appl Phys A 94(2):387–392. https://doi.org/10.1007/s00339-008-4816-410.1007/s00339-008-4816-4 ↗
47. Reimers JN, Dahn JR (1992) Electrochemical and in situ x-ray diffraction studies of lithium intercalation in LixCoO2. J Electrochem Soc 139(8):2091–2097. https://doi.org/10.1149/1.222118410.1149/1.2221184 ↗
48. Liebmann T, Heubner C, Schneider M, Michaelis A (2018) Investigations on the reversible heat generation rates of blended Li-insertion electrodes. J Solid State Electrochem 23(1):245–250. https://doi.org/10.1007/s10008-018-4127-410.1007/s10008-018-4127-4 ↗
49. Zhang Q, White RE (2007) Moving boundary model for the discharge of a LiCoO2 electrode. J Electrochem Soc 154(6):A587–A596. https://doi.org/10.1149/1.283730210.1149/1.2837302 ↗
50. Nara H, Mukoyama D, Yokoshima T, Momma T, Osaka T (2015) Impedance analysis with transmission line model for reaction distribution in a pouch type lithium-ion battery by using micro reference electrode. J Electrochem Soc 163(3):A434–A441. https://doi.org/10.1149/2.0341603jes10.1149/2.0341603jes ↗
51. Cao C, Abate II, Sivonxay E, Shyam B, Jia C, Moritz B, Devereaux TP, Persson KA, Steinrück H-G, Toney MF (2019) Solid electrolyte interphase on native oxide-terminated silicon anodes for li-ion batteries. Joule 3(3):762–781. https://doi.org/10.1016/j.joule.2018.12.01310.1016/j.joule.2018.12.013 ↗
52. Yang X-G, Liu T, Gao Y, Ge S, Leng Y, Wang D, Wang C-Y (2019) Asymmetric temperature modulation for extreme fast charging of lithium-ion batteries. Joule 3(12):3002–3019. https://doi.org/10.1016/j.joule.2019.09.02110.1016/j.joule.2019.09.021 ↗