Experimental Investigations About the Fire Performance of Concrete with High Recycled Aggregate Content (IWCF RILEM 2025)
Source abstract
Abstract
Abstract Concrete is the most widely used construction material worldwide and, at the same time, one of the most resource- and emission-intensive. In parallel, the annual generation of millions of tons of mineral-based construction waste underscores the urgent necessity to recycle concrete aggregates. According to EN 1992-1-2 [1], concrete properties must be verified through experimental testing when the substitution rate of recycled concrete aggregates exceeds 20%. The research presented in this study investigates the fire performance of two types of recycled aggregate concrete, T1 and T2, with substitution levels of 45%, 70%, and 100% for T1 and 35%, 70%, and 100% for T2. The experimental program investigates both the thermomechanical behavior of concrete through hot compression tests and its susceptibility to fire induced spalling. The results indicate that the intrinsic properties of the aggregates exert a greater influence on high temperature performance than the proportion of recycled aggregates used.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Fire effects on concrete materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. EN 1992-1-2 (2025) Design of concrete structures—Part 1-2: General rules—Structural fire design
2. EN 12620 (2008) Aggregates for concrete, 2002+A1:2008
3. DIN 4226-101 (2017) Recycled aggregates for concrete in accordance with DIN EN 12620—Part 101: Types and regulated dangerous substances
4. DIN 1045-2 (2023) Concrete, reinforced and prestressed concrete structures – Part 2: Concrete
5. FprEN 1992-1-1: Eurocode 2—Design of concrete structures—Part 1-1: general rules and rules for buildings, bridges and civil engineering structures
6. EN 206 (2021) Concrete—Specification, performance, production and conformity; 2013+A2
7. Gales J, Parker T, Cree D, Green M (2016) Fire performance of sustainable recycled concrete aggregates: mechanical properties at elevated temperatures and current research needs. Fire Technol 52(3):817–845. https://doi.org/10.1007/s10694-015-0504-z10.1007/s10694-015-0504-z ↗
8. Naus DJ (2010) A compilation of elevated temperature concrete material property data and information for use in assessments of nuclear power plant. nureg/cr-7031, ornl/tm-2009/117. PhD thesis
9. Fernandes B, Carré H, Mindeguia J-C, Perlot C, La Borderie C (2021) Effect of elevated temperatures on concrete made with recycled concrete aggregates - an overview. J Build Eng 44:103235. https://doi.org/10.1016/j.jobe.2021.10323510.1016/j.jobe.2021.103235 ↗
10. Sarhat S (2013) Residual mechanical response of recycled aggregate concrete after exposure to elevated temperatures. J Mater Civ Eng 25(11):1721–1730. https://doi.org/10.1061/(ASCE)MT.1943-5533.000071910.1061/(ASCE)MT.1943-5533.0000719 ↗
11. Zhao H, Wang Y, Liu F (2017) Stress-strain relationship of coarse rca concrete exposed to elevated temperatures. Mag Concr Res 69(13):649–664. https://doi.org/10.1680/jmacr.16.0033310.1680/jmacr.16.00333 ↗
12. prEN 206-1 (2024) Concrete—Specification, performance, production and conformity—Part 1: Performance, requirements, factory production control and assessment criteria for individual values
13. RILEM (2007) Recommendation of rilem tc 200-htc: mechanical concrete properties at high temperatures–modelling and applications. Mater Struct 40(9):855–864. https://doi.org/10.1617/s11527-007-9286-110.1617/s11527-007-9286-1 ↗
14. Schneider U (1976) Behaviour of concrete under thermal steady state and non-steady state conditions. Fire Mater 1(3):103–115. https://doi.org/10.1002/fam.81001030510.1002/fam.810010305 ↗
15. Ma Q, Guo R, Zhao Z, Lin Z, He K (2015) Mechanical properties of concrete at high temperature—a review. Constr Build Mater 93:371–383. https://doi.org/10.1016/j.conbuildmat.2015.05.13110.1016/j.conbuildmat.2015.05.131 ↗
16. Kodur V (2014) Properties of concrete at elevated temperatures. ISRN Civ Eng. https://doi.org/10.1155/2014/46851010.1155/2014/468510 ↗
17. Arioz O (2007) Effects of elevated temperatures on properties of concrete. Fire Saf J 42(8):516–522. https://doi.org/10.1016/j.firesaf.2007.01.00310.1016/j.firesaf.2007.01.003 ↗
18. Varona FB, Baeza-Brotons F, Tenza-Abril AJ, Baeza FJ, Bañón L (2020) Residual compressive strength of recycled aggregate concretes after high temperature exposure. Materials 13(8):1981. https://doi.org/10.3390/ma1308198110.3390/ma13081981 ↗
19. Cao S, Cheng X, Ran H (2024) Understanding structural changes in recycled aggregate concrete under thermal stress. Buildings 14(9):2689. https://doi.org/10.3390/buildings1409268910.3390/buildings14092689 ↗
20. Khan MS, Khan MI, Choudhry RM, Khahro SH, Memon ZA (2025) Performance analysis of fiber reinforced recycled aggregate concrete at elevated temperatures using response surface methodology. Sci Rep 15(1):12916. https://doi.org/10.1038/s41598-025-94258-w10.1038/s41598-025-94258-w ↗
21. Pliya P, Cree D, Hajiloo H, Beaucour A-L, Green MF, Noumowé A (2019) High-strength concrete containing recycled coarse aggregate subjected to elevated temperatures. Fire Technol 55(5):1477–1494. https://doi.org/10.1007/s10694-019-00820-010.1007/s10694-019-00820-0 ↗
22. Khaliq W (2018) Taimur: mechanical and physical response of recycled aggregates high-strength concrete at elevated temperatures. Fire Saf J 96:203–214. https://doi.org/10.1016/j.firesaf.2018.01.00910.1016/j.firesaf.2018.01.009 ↗
23. Shaikh FUA (2018) Mechanical properties of concrete containing recycled coarse aggregate at and after exposure to elevated temperatures. Struct Concr 19(2):400–410. https://doi.org/10.1002/suco.20170008410.1002/suco.201700084 ↗
24. Wang Y, Liu F, Xu L, Zhao H (2019) Effect of elevated temperatures and cooling methods on strength of concrete made with coarse and fine recycled concrete aggregates. Constr Build Mater 210:540–547. https://doi.org/10.1016/j.conbuildmat.2019.03.21510.1016/j.conbuildmat.2019.03.215 ↗
25. Xiao JZ, Zhang CZ (2007) Fire damage and residual strengths of recycled aggregate concrete. Key Eng Mater 348–349:937–940. https://doi.org/10.4028/www.scientific.net/KEM.348-349.93710.4028/www.scientific.net/KEM.348-349.937 ↗
26. Vieira JPB, Correia JR, Brito J (2011) Post-fire residual mechanical properties of concrete made with recycled concrete coarse aggregates. Cem Concr Res 41(5):533–541. https://doi.org/10.1016/j.cemconres.2011.02.00210.1016/j.cemconres.2011.02.002 ↗
27. Chen GM, He YH, Yang H, Chen JF, Guo YC (2014) Compressive behavior of steel fiber reinforced recycled aggregate concrete after exposure to elevated temperatures. Constr Build Mater 71:1–15. https://doi.org/10.1016/j.conbuildmat.2014.08.01210.1016/j.conbuildmat.2014.08.012 ↗
28. Da Beatriz Silva J, Pepe M, Toledo Filho RD (2020) High temperatures effect on mechanical and physical performance of normal and high strength recycled aggregate concrete. Fire Saf J 117:103222. https://doi.org/10.1016/j.firesaf.2020.10322210.1016/j.firesaf.2020.103222 ↗
29. Behera M, Bhattacharyya SK, Minocha AK, Deoliya R, Maiti S (2014) Recycled aggregate from c&d waste & its use in concrete—a breakthrough towards sustainability in construction sector: A review. Constr Build Mater 68:501–516. https://doi.org/10.1016/j.conbuildmat.2014.07.00310.1016/j.conbuildmat.2014.07.003 ↗
30. Zega CJ, Di Maio AA (2006) Recycled concrete exposed to high temperatures. Mag Concr Res 58(10):675–682. https://doi.org/10.1680/macr.2006.58.10.67510.1680/macr.2006.58.10.675 ↗
31. Kou SC, Poon CS, Etxeberria M (2014) Residue strength, water absorption and pore size distributions of recycled aggregate concrete after exposure to elevated temperatures. Cement Concr Compos 53:73–82. https://doi.org/10.1016/j.cemconcomp.2014.06.00110.1016/j.cemconcomp.2014.06.001 ↗
32. Zega CJ, Di Maio AA (2009) Recycled concrete made with different natural coarse aggregates exposed to high temperature. Constr Build Mater 23(5):2047–2052. https://doi.org/10.1016/j.conbuildmat.2008.08.01710.1016/j.conbuildmat.2008.08.017 ↗
33. Wang R, Yu N, Li Y (2020) Methods for improving the microstructure of recycled concrete aggregate: A review. Constr Build Mater 242:118164. https://doi.org/10.1016/j.conbuildmat.2020.11816410.1016/j.conbuildmat.2020.118164 ↗
34. Yan X, Li H, Wong Y-L (2007) Effect of aggregate on high-strength concrete in fire. Mag Concr Res 59(5):323–328. https://doi.org/10.1680/macr.2007.59.5.32310.1680/macr.2007.59.5.323 ↗
35. Laneyrie C, Beaucour A-L, Green MF, Hebert RL, Ledesert B, Noumowe A (2016) Influence of recycled coarse aggregates on normal and high performance concrete subjected to elevated temperatures. Constr Build Mater 111:368–378. https://doi.org/10.1016/j.conbuildmat.2016.02.05610.1016/j.conbuildmat.2016.02.056 ↗
36. ISO 834-1: Fire-resistance tests—Elements of building construction—Part 1. https://standards.iteh.ai/catalog/standards/sist/413bba69-0b3f-4525-ac91-
37. Chan P (1999) Fire behavior of high-performance concrete made with silica fume at various moisture contents. ACI Mater J https://doi.org/10.14359/64010.14359/640 ↗
38. Mindeguia JC, Pimienta P (2009) Experimental study on the contribution of pore vapour pressure to the thermal instability risk of concrete. PhD thesis. https://www.researchgate.net/publication/259721516
39. Liu J-C, Du L-P, Yao Y, Beaucour A-L, Wang J-Q, Zhao X-Y (2024) A close look at fire-induced explosive spalling of ultra-high performance concrete: from materials to structures. Archives Civ Mech Eng 24(2):124. https://doi.org/10.1007/s43452-024-00942-510.1007/s43452-024-00942-5 ↗
40. Ichikawa Y, England GL (2004) Prediction of moisture migration and pore pressure build-up in concrete at high temperatures. Nucl Eng Des 228(1–3):245–259. https://doi.org/10.1016/j.nucengdes.2003.06.01110.1016/j.nucengdes.2003.06.011 ↗
41. Reiners J (2023) The influence of the physical and chemical properties of hardened cement paste on the fire-induced spalling of concrete. university library Braunschweig, https://doi.org/10.24355/dbbs.084-202305051122-0 (PhD thesis)10.24355/dbbs.084-202305051122-0 ↗
42. Ko J, Ryu D, Noguchi T (2011) The spalling mechanism of high-strength concrete under fire. Mag Concr Res 63(5):357–370. https://doi.org/10.1680/macr.10.0000210.1680/macr.10.00002 ↗
43. Harmathy TZ (1965) Effect of moisture on the fire endurance of building elements. Division of Building Research) DBR-RP 270: https://doi.org/10.4224/40001466. (Research Paper (National Research Council of Canada)10.4224/40001466 ↗