Melting and Dripping Flow Behaviors on the Downward Flame Spread of a Wide XPS Foam
Source abstract
Abstract
The XPS foam is an economical and popular material for building insulation. The fire hazard of the polymer foams is a big threat due to their fast burning with melting, dripping and flowing. The objective of this work is to investigate the complicated downward flame spread characteristics of a wide polymer foam. An image division and calculation method is used to analyze the dynamic downward movement of the irregular flame leading curves based on the experiments. The results show that the lagged sub-flames might suddenly spread downward fast and catch up the neighboring flames. And the increasing of the flame spread velocity and flame height illustrate the acceleration of the downward burning, which is induced by the dripping and accumulating of liquid fuel. Additionally, the local peaks of the flame spread velocity arrive later than the flame height for both overall flame and detailed sub-flames. The flame height increases in the stage of liquid fuel accumulation but decreased in the dripping stage. The dripping of liquid fuel results in the increasing of the flame spread velocity and decreasing of the flame height. The results also show that the relationship between the non-dimensional local peak sub-flame flow velocities and the corresponding non-dimensional peak sub-flame heights can be well described with a power function, which indicates that the introduction of the small sub-flames is effective to model the complicated downward flame spread behaviors of XPS foams with stochastic dripping. Finally, most of the delay times of local peak sub-flame velocities here are in the range of [15 s, 25 s].
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire dynamics and safety research · Flame retardant materials and properties · Evacuation and Crowd Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Papadopoulos AM, Giama E (2007) Environmental performance evaluation of thermal insulation materials and its impact on the building. Build Environ 42:2178–2187. https://doi.org/10.1016/j.buildenv.2006.04.01210.1016/j.buildenv.2006.04.012 ↗
2. Cai SS, Zhang BX, Cremaschi L (2017) Review of moisture behavior and thermal performance of polystyrene insulation in building applications. Build Environ 123:50–65. https://doi.org/10.1016/j.buildenv.2017.06.03410.1016/j.buildenv.2017.06.034 ↗
3. https://en.wikipedia.org/wiki/Beijing_Television_Cultural_Center_fire
4. https://en.wikipedia.org/wiki/Grenfell_Tower_fire#Cause
5. De Ris JN (1968) The spread of diffusion flame over a combustible surface, Ph.D. thesis, Harvard University
6. De Ris JN (1969) Spread of a laminar diffusion flame. Proc Combust Inst 12(1):241–25210.1016/S0082-0784(69)80407-8 ↗
7. Wichman IS, Williams FA, Glassman I (1982) Theoretical aspects of flame spread in an opposed flow over flat surfaces of solid fuels. Proc Combust Inst 19(1):835–84510.1016/S0082-0784(82)80259-2 ↗
8. Fernandez-pello A, Ray S, Glassman I (1981) Flame spread in an opposed forced flow: the effect of ambient oxygen concentration. Proc Combust Inst 18(1):579–58910.1016/S0082-0784(81)80063-X ↗
9. Quintiere J, Harkleroad M, Walton D (1983) Measurement of material flame spread properties. Combust Sci Technol 32:67–89. Doi:10.1080/0010220830892365310.1080/00102208308923653 ↗
10. Delichatsios MA (1986) Exact solution for the rate of creeping flame spread over thermally thin materials. Combust Sci Technol 44:257-267. Doi:10.1080/0010220860896030710.1080/00102208608960307 ↗
11. Bhattacharjee S, West J, Dockter S (1996) A simplified theory for DeRis flame over thick and thin fuel beds. Combust Flame 104(1–2):66-80. Doi:10.1016/0010-2180(95)00109-310.1016/0010-2180(95)00109-3 ↗
12. Bhattacharjee S, Takahashi S, Wakai K, Paolini CP (2011) Correlating flame geometry in opposed-flow flame spread over thin fuels. Proc Combust Inst 33(2):2465–2472. https://doi.org/10.1016/j.proci.2010.06.05310.1016/j.proci.2010.06.053 ↗
13. Williams FA (1977) Mechanisms of fire spread. Proc Combust Inst 16(1):1281–129410.1016/S0082-0784(77)80415-3 ↗
14. Fernandez-Pello AC, Hirano T (1983) Controlling mechanisms of flame spread. Combust Sci Technol 32(1–4):1–31. https://doi.org/10.1080/0010220830892365010.1080/00102208308923650 ↗
15. Fernandez-Pello AC (1984) Flame spread modeling. Combust Sci Technol 39:119–134. https://doi.org/10.1080/0010220840892378610.1080/00102208408923786 ↗
16. Wichman IS (1992) Theory of opposed-flow flame spread. Prog Energy Combust Sci 18:553–593. https://doi.org/10.1016/0360-1285(92)90039-410.1016/0360-1285(92)90039-4 ↗
17. Prasad K, Kramer R, Marsh N, Nyden M, Ohlemiller T, Zammarano M (2009) Numerical simulation of fire spread on polyurethane foam slabs. In: Fire research division, BFRL, NIST annual fire conference
18. Zheng GY, Wichman IS, Benard A (2001) Opposed-flow flame spread over polymeric materials: influence of phase change. Combust Flame 124(3):387–408. https://doi.org/10.1016/S0010-2180(00)00212-110.1016/S0010-2180(00)00212-1 ↗
19. Zheng GY, Wichman IS, Benard A (2002) Opposed-flow ignition and flame spread over melting polymers with Navier–Stokes gas flow. Combust Theory Modell 6(2):317–337. https://doi.org/10.1088/1364-7830/6/2/31010.1088/1364-7830/6/2/310 ↗
20. Xie QY, Tu R, Wang N, Ma X, Jiang X (2014) Experimental study on flowing burning behaviors of a pool fire with dripping of melted thermoplastics. J Hazard Mater 267:48–54. https://doi.org/10.1016/j.jhazmat.2013.12.03310.1016/j.jhazmat.2013.12.033 ↗
21. Xie QY, Zhang HP, Ye RB (2009) Experimental study on melting and flowing behavior of thermoplastics combustion based on a new setup with a T-shape trough. J Hazard Mater 166(2–3):1321–1325. https://doi.org/10.1016/j.jhazmat.2008.12.05710.1016/j.jhazmat.2008.12.057 ↗
22. An WG, Xiao HH, Liew KM (2015) Downward flame spread over extruded polystyrene. J Therm Anal Calorim 119(2):1091–1103. Doi:10.1007/s10973-014-4186-410.1007/s10973-014-4186-4 ↗
23. An WG, Jiang L, Sun JH, Liew KM (2014) Effects of sample width on downward flame spread over typical energy conservation materials at a high elevation area. Appl Mech Mater 664:199–203. https://doi.org/10.4028/www.scientific.net/AMM.664.19910.4028/www.scientific.net/AMM.664.199 ↗
24. Wang Y, Zhang J (2013) Thermal stabilities of drops of burning thermoplastics under the UL94 vertical test conditions. J Hazard Mater 246–247:103–109. https://doi.org/10.1016/j.jhazmat.2012.12.02010.1016/j.jhazmat.2012.12.020 ↗
25. Luo S, Xie Q, Tang X, Qiu R, Yang Y (2017) A quantitative model and the experimental evaluation of the liquid fuel layer for the downward flame spread of XPS foam. J Hazard Mater 329:30–37. https://doi.org/10.1016/j.jhazmat . 2017.01.02810.1016/j.jhazmat.2017.01.028 ↗
26. Kandola BK, Price D, Milnes GJ, Silva AD (2013) Development of a novel experimental technique for quantitative study of melt dripping of thermoplastic polymers. Polym Degrad Stab 98:52–6310.1016/j.polymdegradstab.2012.10.028 ↗
27. Kandola BK, Ndiaye M, Price D (2014) Quantification of polymer degradation during melt dripping of thermoplastic polymers. Polym Degrad Stab 106:16–2510.1016/j.polymdegradstab.2013.12.020 ↗
28. Kim Y, Hossain A, Nakamura Y (2015) Numerical modeling of melting and dripping process of polymeric material subjected to moving heat flux: prediction of drop time. Proc Combust Inst 35(3):2555–256210.1016/j.proci.2014.05.068 ↗
29. Kobayashi Y, Huang X, Nakaya S, Tsue M, Fernandez-Pello C (2017) Flame spread over horizontal and vertical wires: the role of dripping and core. Fire Saf J 91:112–12210.1016/j.firesaf.2017.03.047 ↗
30. Pastor E, Agueda A, Andrade-Cetto J, Munoz M, Perez Y, Planas E (2006) Computing the rate of spread of linear flame fronts by thermal image processing. Fire Saf J 41(8):569–579. https://doi.org/10.1016/j.firesaf.2006.05.00910.1016/j.firesaf.2006.05.009 ↗
31. Bhattacharjee S, Carmignani L, Celniker G, Rhoades B (2017) Measurement of instantaneous flame spread rate over solid fuels using image analysis. Fire Saf J 91:123–129. https://doi.org/10.1016/j.firesaf.2017.03.03910.1016/j.firesaf.2017.03.039 ↗
32. Otsu N (1979) A threshold selection method from gray-level histograms. IEEE Trans Syst Man Cybern 9(1):62–66. https://doi.org/10.1109/TSMC.1979.431007610.1109/TSMC.1979.4310076 ↗
33. Ren M, Yang J, Sun H (2002) Tracing boundary contours in a binary image. Image Vis Comput 20(2):125–131. https://doi.org/10.1016/S0262-8856(01)00091-910.1016/S0262-8856(01)00091-9 ↗