Bulk substitution of F-terminations from Ti3C2Tx MXene by cation pillaring and gas hydrolysation
Source abstract
Abstract
Applications of 2D MXenes are limited by the difficulty of controlling bulk termination groups after the initial HF etching step without forming surface oxides. Here, we report on gas hydrolysation using a continuous flow of Ar (g) with a controlled partial pressure of H2O (g) as a new method to change the terminations of multilayered Ti3C2Tx MXene particles (T = O, OH and F), and demonstrate pre-intercalation of cations as a necessity for successful hydrolysation as it enables water molecules to enter the Ti3C2Tx MXene structure. Hydrolysation of pristine HF-etched Ti3C2Tx shows no compositional change before oxidation into a TiO2/C composite starts at T > 300 ˚C. However, by pre-intercalating various cations into the MXene, a pillaring of the structure is achieved, which for certain cations (K+ and Na+) remains even after hydrolysation at 300 ˚C. By hydrolysing K-intercalated Ti3C2Tx at 300 ˚C, a significant bulk F reduction of 78 % was achieved, accompanied by a comparable increase in O content and insignificant surface oxidation of the particles. For other cations (Mg2+, Li+ and TBA+) the expanded interlayer spacing collapsed upon hydrolysation, resulting in no significant compositional changes. Moreover, hydrolysation is shown to give higher selectivity towards F removal compared to air annealing, which instead resulted in the oxidation of C to CO2 and the formation of TiOF2. In Li-ion battery half cells, the intercalation of K-ions reduces both the capacity and energy efficiency compared to pristine Ti3C2Tx. Nevertheless, hydrolysation increases the capacity and intercalation voltage, and is thus a feasible method to control the electrochemical performance of Ti3C2Tx MXene. In summary, gas hydrolysation is demonstrated as a selective and efficient method to substitute F terminations with O-related terminations in multilayered MXene particles and pave the way for utilisation on other MXene compositions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: MXene and MAX Phase Materials · 2D Materials and Applications · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Electromagnetic interference shielding with 2D transition metal carbides (MXenes)10.1126/science.aag2421 ↗
2. Mixed-dimensional MXene-hydrogel heterostructures for electronic skin sensors with ultrabroad working range10.1126/sciadv.abb5367 ↗
3. Applications of MXene-based membranes in water purification: A review10.1016/j.chemosphere.2020.126821 ↗
4. Two-dimensional transition metal carbides and nitrides (MXenes) for biomedical applications10.1039/C7CS00838D ↗
5. MXene: a promising transition metal carbide anode for lithium-ion batteries10.1016/j.elecom.2012.01.002 ↗
6. R. Garg, A. Agarwal, M. Agarwal, A review on MXene for energy storage application: effect of interlayer distance, Mater. Res. Express. 7 (2020) 022001. https://doi.org/10.1088/2053-1591/AB750D.10.1088/2053-1591/ab750d ↗
7. Emerging 2D MXenes for supercapacitors: status, challenges and prospects10.1039/D0CS00175A ↗
8. The world of two-dimensional carbides and nitrides (MXenes)10.1126/science.abf1581 ↗
9. NMR reveals the surface functionalisation of Ti3C2 MXene10.1039/C6CP00330C ↗
10. 25th anniversary article: MXenes: A new family of two-dimensional materials10.1002/adma.201304138 ↗
11. Role of Surface Structure on Li-Ion Energy Storage Capacity of Two-Dimensional Transition-Metal Carbides10.1021/ja501520b ↗
12. Are MXenes promising anode materials for Li ion batteries? Computational studies on electronic properties and Li storage capability of Ti3C2 and Ti3C2X2 (X = F, OH) monolayer10.1021/ja308463r ↗
13. Are MXenes suitable as cathode materials for rechargeable Mg batteries?, Sustain
14. Ion intercalation into two-dimensional transition-metal carbides: Global screening for new high-capacity battery materials10.1021/ja508154e ↗
15. Role of MXene surface terminations in electrochemical energy storage: A review10.1016/j.cclet.2021.02.012 ↗
16. Covalent surface modifications and superconductivity of two-dimensional metal carbide MXenes10.1126/science.aba8311 ↗
17. Fluorine-free Ti3C2Tx as anode materials for Li-ion batteries10.1016/j.elecom.2019.05.021 ↗
18. A general Lewis acidic etching route for preparing MXenes with enhanced electrochemical performance in non-aqueous electrolyte10.1038/s41563-020-0657-0 ↗
19. Halogen etch of Ti3AlC2 MAX phase for MXene fabrication10.1021/acsnano.0c08630 ↗
20. Synthesis and thermal stability of two-dimensional carbide MXene Ti3C210.1016/j.mseb.2014.10.009 ↗
21. Understanding the Lithium Storage Mechanism of Ti3C2Tx MXene10.1021/acs.jpcc.8b10790 ↗
22. Mechanism and Kinetics of Oxidation Reaction of Aqueous Ti3C2Tx Suspensions at Different pHs and Temperatures10.1021/acsami.1c04663 ↗
23. One-step hydrothermal synthesis of a TiO2-Ti3C2Tx nanocomposite with small sized TiO2 nanoparticles10.1016/j.ceramint.2017.05.151 ↗
24. Sodium hydroxide and vacuum annealing modifications of the surface terminations of a Ti3C2 (MXene) epitaxial thin film10.1039/C8RA07270A ↗
25. One-step synthesis of nanocrystalline transition metal oxides on thin sheets of disordered graphitic carbon by oxidation of MXenes10.1039/C4CC01646G ↗
26. How Much Oxygen Can a MXene Surface Take Before It Breaks?10.1002/adfm.201909005 ↗
27. Solvent Co-intercalation into Few-layered Ti3C2Tx MXenes in Lithium Ion Batteries Induced by Acidic or Basic Post-treatment10.1021/acsnano.0c10153 ↗
28. Achieving High Pseudocapacitance of 2D Titanium Carbide (MXene) by Cation Intercalation and Surface Modification10.1002/aenm.201602725 ↗
29. Nb2CTx MXene: High capacity and ultra-long cycle capability for lithium-ion battery by regulation of functional groups10.1016/j.jechem.2020.05.037 ↗
30. Removing Fluoride-Terminations from Multilayered V2CTx MXene by Gas Hydrolyzation10.1021/acsomega.2c02441 ↗
31. Depth range of primary electrons, electron beam broadening, and spatial resolution in electron-beam studies10.3103/S1062873809040029 ↗
32. Vapor pressure formulation for water in range 0 to 100 Degrees C. A revision10.6028/jres.080A.071 ↗
33. Raman Spectroscopy Analysis of the Structure and Surface Chemistry of Ti3C2Tx MXene10.1021/acs.chemmater.0c00359 ↗
34. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
35. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
36. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
37. Atkins · 2017 · 944
38. First principles phonon calculations in materials science10.1016/j.scriptamat.2015.07.021 ↗
39. Johnson, NIST Computational Chemistry Comparison and Benchmark Database
40. Formation of nanostructured graphitic carbon from coconut waste via low-temperature catalytic graphitisation10.1016/j.jestch.2020.06.011 ↗
41. Characterization of amorphous and nanocrystalline carbon films10.1016/j.matchemphys.2005.07.048 ↗
42. Preparation of nitrogen and sulphur Co-doped reduced graphene oxide (rGO-NS) using N and S heteroatom ofthiourea10.1088/1757-899X/509/1/012119 ↗
43. Effect of Metal Ion Intercalation on the Structure of MXene and Water Dynamics on its Internal Surfaces10.1021/acsami.6b01490 ↗
44. The Missing Piece: The Structure of the Ti3C2Tx MXene and Its Behavior as Negative Electrode in Sodium Ion Batteries10.1021/acs.nanolett.1c02809 ↗
45. Stacking Sequence, Interlayer Bonding, Termination Group Stability and Li/Na/Mg Diffusion in MXenes10.1021/acsmaterialslett.1c00316 ↗
46. Binder-free 2D titanium carbide (MXene)/carbon nanotube composites for high-performance lithium-ion capacitors10.1039/C8NR00380G ↗
47. Ion-Exchange and Cation Solvation Reactions in Ti3C2 MXene10.1021/acs.chemmater.6b01275 ↗
48. Control of MXenes’ electronic properties through termination and intercalation10.1038/s41467-018-08169-8 ↗
49. Tailoring Nitrogen Terminals on MXene Enables Fast Charging and Stable Cycling Na-Ion Batteries at Low Temperature10.1007/s40820-022-00885-7 ↗
50. Calorimetric Study of Alkali Metal Ion (K+, Na+, Li+) Exchange in a Clay-Like MXene10.1021/acs.jpcc.7b02419 ↗
51. Direct Assessment of Nanoconfined Water in 2D Ti3C2 Electrode Interspaces by a Surface Acoustic Technique10.1021/jacs.8b04862 ↗
52. Tunable pseudocapacitance storage of MXene by cation pillaring for high performance sodium-ion capacitors10.1039/C8TA02068J ↗
53. Vibrational properties of Ti3C2 and Ti3C2T2 (T = O, F, OH) monosheets by first-principles calculations: a comparative study10.1039/C4CP05666C ↗
54. Switching the Nonlinear Optical Absorption of Titanium Carbide MXene by Modulation of the Surface Terminations10.1021/acsnano.1c07060 ↗
55. Resolving the Structure of Ti3C2Tx MXenes through Multilevel Structural Modeling of the Atomic Pair Distribution Function10.1021/acs.chemmater.5b04250 ↗
56. X-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)10.1016/j.apsusc.2015.11.089 ↗
57. Influence of metal ions intercalation on the vibrational dynamics of water confined between MXene layers
58. Cation intercalation and high volumetric capacitance of two-dimensional titanium carbide10.1126/science.1241488 ↗
59. Multimodality of Structural, Electrical, and Gravimetric Responses of Intercalated MXenes to Water10.1021/acsnano.7b05264 ↗
60. Prediction and characterization of mxene nanosheet anodes for non-lithium-ion batteries10.1021/nn503921j ↗
61. The Importance of Stacking and Coordination for Li, Na, and Mg Diffusion and Intercalation in Ti3C2T2 MXene10.1002/admi.202200014 ↗
62. Solvent Co-Intercalation-Induced Activation and Capacity Fade Mechanism of Few-/Multi-Layered MXenes in Lithium Ion Batteries10.1002/smll.202104130 ↗
63. Metal Cation Pre-Intercalated Ti3C2Tx MXene as Ultra-High Areal Capacitance Electrodes for Aqueous Supercapacitors10.1021/acsaem.2c00653 ↗