journal article·2019-09-01

The effect of electrode calendering on the performance of fully printed Zn∣MnO 2 batteries

Patrick Rassek, Erich Steiner, Michael Herrenbauer, Timothy C Claypole

Publisher page

Abstract

Abstract Primary zinc–carbon batteries with a coplanar battery architecture were prepared by screen printing. Prior to battery activation by printing of an acidic zinc chloride electrolyte, printed zinc and manganese dioxide electrodes were compacted by calendering. Material densification of the electodes resulted in electrode layer thickness reduction on both sides, modified micropore surface area and volume on the cathode side. Galvanostatic impedance measurements and chronopotentiometry were used to characterise fabricated batteries with the individually prepared electrode configurations. While calendering of both electrodes of the batteries showed adverse effects by an increase of internal resistances and a reduction of discharge capacities, exclusive calendering of the zinc anode increased the active material utilisation by electrochemical cell reaction and thus the discharge efficiency of the battery.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced battery technologies research · Supercapacitor Materials and Fabrication · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Intellilog
2. Fully roll-to-roll gravure printable wireless (13.56 MHz) sensor-signage tags for smart packaging10.1038/srep05387 ↗
3. Suganuma · 2014 · vol 7410.1007/978-1-4614-9625-0 ↗
4. A flexible organic reflectance oximeter array10.1073/pnas.1813053115 ↗
5. Tattoo-based wearable electrochemical devices: a review10.1002/elan.201400537 ↗
6. Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applications10.1016/j.orgel.2015.08.007 ↗
7. Printed batteries and conductive patterns in technical textiles10.7567/JJAP.57.05GB02 ↗
8. Pulsed discharge of printed secondary Zn-MnO2 batteries for IoT and wearable devices10.1088/1742-6596/1052/1/012012 ↗
9. Performance optimization of fully printed primary (ZnMnO2) and secondary (NiMH) batteries
10. Development of printed thin and flexible batteries
11. Gedruckte Filmbatterien10.1524/teme.2013.0008 ↗
12. Characterization and optimization of a printed, primary silver–zinc battery10.1016/j.jpowsour.2011.09.076 ↗
13. Development of an air-stable, high energy density printed silver oxide battery for printed electronics
14. Paper-based, printed zinc–air battery10.1016/j.jpowsour.2009.06.054 ↗
15. Development of a high energy density flexible zinc-air battery10.1149/2.0361606jes ↗
16. Preparation and electrochemical performance of 1.5 V and 3.0 V-class primary film batteries for radio frequency identification (RFID)10.33961/JECST.2010.1.1.039 ↗
17. Performance improvements of pouch-type flexible thin-film lithium-ion batteries by modifying sequential screen-printing process10.1016/j.electacta.2014.06.105 ↗
18. A half millimeter thick coplanar flexible battery with wireless recharging capability10.1021/nl5045814 ↗
19. Optimization of primary printed batteries based on Zn/MnO210.1016/j.jpowsour.2014.03.103 ↗
20. Customized printed batteries driving sensor applications10.1109/ISCDG.2013.6656322 ↗
21. Technology, design, packaging, simulation and test10.1109/ISCDG.2013.6656322 ↗
22. The effect of ink formulation and electrode geometry design on the electrochemical performance of a printed alkaline battery10.1088/2058-8585/aa56e8 ↗
23. Design of 1.5 V thin and flexible primary batteries for battery-assisted passive (BAP) radio frequency identification (RFID) tag10.1016/j.cap.2010.03.010 ↗
24. Layer-by-layer fully printed Zn-MnO2 batteries with improved internal resistance and cycle life10.1088/1742-6596/660/1/012009 ↗
25. Screen printing of thin, flexible primary and secondary batteries
26. A flexible high potential printed battery for powering printed electronics10.1063/1.4810974 ↗
27. Industrial perspective on printed batteries10.1002/9781119287902.ch7 ↗
28. Jossen · 2006
29. Linden · 2002
30. Analyses of the calendaring process for performance optimization of li-ion battery cathode10.1155/2016/7395060 ↗
31. Effect of calendering on electrode wettability in lithium-ion batteries10.3389/fenrg.2014.00056 ↗
32. Effect of calendering LiFePO4 electrodes10.1149/2.029211jes ↗
33. Characterization of the calendering process for compaction of electrodes for lithium-ion batteries10.1016/j.jmatprotec.2017.05.031 ↗
34. Lanceros-Méndez · 201810.1002/9781119287902 ↗
35. Sefar · 2018
36. Physical Interpretations of Nyquist plots for EDLC Electrodes and devices10.1021/acs.jpcc.7b10582 ↗
37. Hioki
38. Mezger · 2014
39. Zoski · 2007
40. Benenson · 2006
41. Barsoukov · 201810.1002/9781119381860 ↗
42. Bio-Logic Science Instruments
43. Bio-Logic Science Instruments
44. Bio-Logic Science Instruments
45. Bio-Logic Science Instruments
46. Fundamentals of battery dynamics10.1016/j.jpowsour.2005.10.041 ↗
47. Electrochemical behavior of zinc particles with silica based coatings as anode material for zinc air batteries with improved discharge capacity10.1016/j.jpowsour.2017.03.096 ↗
49. Entwicklung funktionalisierter Zinkpartikel als anodenmaterial für wiederaufladbare Zink-Luft-Batterien
50. Synthesis and characterization of layered zinc hydroxychlorides10.1016/j.jssc.2007.05.001 ↗