A simple process to create micro-gaps in printed copper electrodes by sintering induced stress in flexible PET substrates
Source abstract
Abstract
Abstract A new simple low-cost technique for fabricating micro-gaps of less than 50 µ m in copper electrodes is reported, which combines conventional screen printing of copper paste and intense pulsed light (IPL) sintering. The micro-gap is created via a two-step IPL sintering. First, a continuous printed copper stripe is half sintered along its length with another half blocked by an opaque mask. Then, the second sintering is performed over the entire length of copper stripe with the opaque mask removed. At the joint between two sintering steps, a micro-gap is formed across the copper stripe due to thermal contraction of underlying polyethylene terephthalate substrate. The width of copper micro-gaps can be adjusted by IPL energy. Simple light emitting diode circuits have been made by the micro-gap electrodes, demonstrating its feasibility for practical applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Fabrication of flat micro-gap electrodes for molecular electronics10.1002/eej.20152 ↗
2. Effect of micro-gap electrode on detection of dilute NO2 using WO3 thin film microsensors10.1016/j.snb.2004.09.047 ↗
3. Effect of micro-gap electrode on sensing properties to dilute chlorine gas of indium oxide thin film microsensors10.1016/j.snb.2005.11.005 ↗
4. Haisu · 2014 · 63510.4028/www.scientific.net/AMR.925.635 ↗
5. Single-molecule electrochemistry: present status and outlook10.1021/ar300169d ↗
6. Printing conductive nanomaterials for flexible and stretchable electronics: a review of materials, processes, and applications10.1002/admt.201800546 ↗
7. A printing technology combining screen-printing with a wet-etching process for the gate electrodes of organic thin film transistors on a plastic substrate10.1016/j.mee.2009.11.073 ↗
8. Effects of different electroplated gate electrodes on electrical performances of flexible organic thin film transistor and flexibility improvement10.1016/j.orgel.2007.03.005 ↗
9. Electrical characteristics of poly(3-hexylthiophene) organic thin film transistor with electroplated metal gate electrodes on polyimide10.1016/j.tsf.2006.10.018 ↗
10. Cost-effective silver nano-ink for inkjet printing in application of flexible electronic devices10.1016/j.cplett.2020.137904 ↗
11. Large-scale roll-to-roll micro-gravure printed flexible PBDB-T/IT-M bulk heterojunction photodetectors10.1007/s00339-020-03624-0 ↗
12. Uniform and stable aerosol jet printing of carbon nanotube thin-film transistors by ink temperature control10.1021/acsami.0c12046 ↗
13. Fabrication of microfibrous PCL/MWCNTs scaffolds via melt-based electrohydrodynamic printing10.1016/j.matlet.2020.128440 ↗
14. Direct transparent electrode patterning on layered GaN substrate by screen printing of indium tin oxide nanoparticle ink for Eu-doped GaN red light-emitting diode10.1063/1.4903234 ↗
15. Chemistry of solid metal-based inks and pastes for printed electronics—a review10.1016/j.apmt.2019.02.012 ↗
16. High-resolution patterning of graphene by screen printing with a silicon stencil for highly flexible printed electronics10.1002/adma.201404133 ↗
17. Printing parameters and ink components affecting ultra-fine-line gravure-offset printing for electronics applications10.1016/j.jeurceramsoc.2003.11.011 ↗
18. Cu ion ink for a flexible substrate and highly conductive patterning by intensive pulsed light sintering10.1021/am303268k ↗
19. The effect of poly (N-vinylpyrrolidone) molecular weight on flash light sintering of copper nanopaste10.1016/j.tsf.2014.09.035 ↗
20. Flash light sintered copper precursor/nanoparticle pattern with high electrical conductivity and low porosity for printed10.1016/j.tsf.2015.03.004 ↗
21. Printed highly conductive Cu films with strong adhesion enabled by low-energy photonic sintering on low-Tg flexible plastic substrate10.1088/1361-6528/28/3/035203 ↗
22. Temperature changes of copper nanoparticle ink during flash light sintering10.1016/j.jmatprotec.2014.06.007 ↗