journal article·2022-09-01Open access

Highly sensitive and fully printable humidity sensor on a flexible substrate based on a zinc oxide and polyethylenimine composite

Fatemeh Samaeifar, Mohsen Azadinia, Atefeh Ghorbani, Junfei Chen, Mathieu Gratuze, Mohsen Ketabi, Ricardo Izquierdo, Hany Aziz

Abstract

Abstract We report a highly sensitive and fully printable capacitive humidity sensor based on a zinc oxide (ZnO) and polyethylenimine (PEI) composite. The sensor has a simple structure, consisting only of a layer of the ZnO:PEI composite, coated using an ethanol solution, on a layer of silver inter-digital electrodes that have been pre-printed on a polyethyleneterephthalate substrate. The sensor with ZnO:PEI in the ratio of 2:1 by volume exhibits a response of 43 907 000% at maximum humidity, with a detection range of 15%–95% relative humidity, higher than other sensors fully made by wet-coating processes. Fourier transform infrared spectroscopy, atomic force microscopy, and scanning electron microscopy measurements suggest that the high response likely arises from the use of a hydrophilic polymer with a high dipole moment which facilitates dipole-dipole interactions with water molecules and from the highly granular morphology of the composite which leads to a high surface-to-volume ratio and more-numerous water adsorption sites. The fabricated sensor also demonstrates short response/recovery times (5 s/3 s), good repeatability over multiple humidification and desiccation cycles, and only 5% loss in response after being kept in the ambient for three weeks.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Wide range and stable ink-jet printed humidity sensor based on graphene and zinc oxide nanocomposite10.1007/s10854-018-8552-z ↗
2. Novel application of attapulgite on high performance and low-cost humidity sensors10.1016/j.snb.2019.127534 ↗
3. Organic thin‐film capacitive and resistive humidity sensors: a focus review10.1002/admi.201800969 ↗
4. Graphene oxide-deposited tilted fiber grating for ultrafast humidity sensing and human breath monitoring10.1016/j.snb.2019.05.024 ↗
5. Polysquaramides: rapid and stable humidity sensing for breath monitoring and morse code communication10.1016/j.snb.2020.128390 ↗
6. High sensitive and fast response humidity sensor based on polymer composite nanofibers for breath monitoring and non-contact sensing10.1016/j.snb.2020.129239 ↗
7. Microstructured optical fiber based Fabry–Pérot interferometer as a humidity sensor utilizing chitosan polymeric matrix for breath monitoring10.1038/s41598-020-62887-y ↗
8. Evaluation of the solid state form of tadalafil in sub-micron thin films using nanomechanical infrared spectroscopy10.1016/j.ijpharm.2019.05.010 ↗
9. Facile primary battery-based humidity sensor for multifunctional application10.1016/j.snb.2022.132369 ↗
10. High performance humidity sensor based on 3D mesoporous Co3O4 hollow polyhedron for multifunctional applications10.1016/j.apsusc.2022.152698 ↗
11. A Nb2CTx/sodium alginate-based composite film with neuron-like network for self-powered humidity sensing10.1016/j.cej.2022.135588 ↗
12. A water durable resistive humidity sensor based on rigid sulfonated polybenzimidazole and their properties10.1016/j.snb.2017.02.074 ↗
13. Integrated humidity sensor based on SU-8 polymer microdisk microresonator10.1016/j.snb.2016.09.136 ↗
14. Halloysite nanotubes: natural, environmental-friendly and low-cost nanomaterials for high-performance humidity sensor10.1016/j.snb.2020.128204 ↗
15. Novel polymeric humidity sensors based on sulfonated poly (ether ether ketone) s: influence of sulfonation degree on sensing properties10.1016/j.snb.2016.09.179 ↗
16. Facile, flexible, cost-saving, and environment-friendly paper-based humidity sensor for multifunctional applications10.1021/acsami.9b05709 ↗
17. Temperature, humidity and gas sensors integrated on plastic foil for low power applications10.1016/j.snb.2009.04.019 ↗
18. A highly sensitive humidity sensor based on DC reactive magnetron sputtered zinc oxide thin film10.1016/j.sna.2010.09.006 ↗
19. External alignment marks technique for front-to-back side alignment using single-side mask aligner10.1007/s40799-017-0213-2 ↗
20. Power generation humidity sensor based on primary battery structure10.1016/j.cej.2022.136910 ↗
21. Paper and carbon ink enabled low-cost, eco-friendly, flexible, multifunctional pressure and humidity sensors10.1088/1361-665X/abe87d ↗
22. Paper-based sensors for gas, humidity, and strain detections: a review10.1021/acsami.0c06435 ↗
23. Ink-jet printed transparent and flexible electrodes based on silver nanoparticles10.1007/s10854-017-7886-2 ↗
24. Electrical and optical properties of ZnO–WO3 nanocomposite and its application as a solid-state humidity sensor10.1007/s12034-017-1373-5 ↗
25. Forming ohmic Ag/SnO2 contacts10.1016/j.matlet.2014.11.046 ↗
26. Structural, thermal, optical and conductivity studies of Co/ZnO nanoparticles doped CMC polymer for solid state battery applications10.1016/j.polymertesting.2020.106803 ↗
27. AuNPs hybrid black ZnO nanorods made by a sol-gel method for highly sensitive humidity sensing10.3390/s18010218 ↗
28. Improved performance of photoconductive gain hybrid UV detector by trap state engineering of ZnO nanoparticles10.1063/1.4995320 ↗
29. Capacitive humidity-sensing properties of ZnO nanorods/silicon nanoporous pillar array enhanced by LiCl incorporation10.1016/j.snb.2018.06.023 ↗
30. ZnO/MoS2-based enhanced humidity sensor prototype with Android app interface for mobile platform10.1109/JSEN.2019.2896208 ↗
31. High sensitivity portable capacitive humidity sensor based on In2O3 nanocubes-decorated GO nanosheets and its wearable application in respiration detection10.1016/j.snb.2019.126973 ↗
32. Omniphobic re-entrant PVDF membrane with ZnO nanoparticles composite for desalination of low surface tension oily seawater10.1016/j.watres.2019.114982 ↗
33. PVDF/ZnO hybrid nanocomposite applied as a resistive humidity sensor10.1016/j.surfin.2020.100780 ↗
34. Enhanced formaldehyde-sensing performances of mixed polyethyleneimine-multiwalled carbon nanotubes composite films on quartz crystal microbalance10.1109/JSEN.2015.2468073 ↗
35. Quartz crystal microbalance humidity sensors integrated with hydrophilic polyethyleneimine-grafted polyacrylonitrile nanofibers10.1016/j.snb.2020.128286 ↗
36. The dielectric properties and optical propagation loss of c-axis oriented ZnO thin films deposited by sol–gel process10.1016/S0272-8842(00)00031-6 ↗
37. Ionic relaxation in polyethyleneimine-lithium bis (trifluoromethylsulfonyl) imide polymer electrolytes10.1063/1.3490133 ↗
38. Recent advances in humidity sensor for human body related humidity detections10.1039/D1TC04180K ↗
39. Printable highly stable and superfast humidity sensor based on two dimensional molybdenum diselenide10.1038/s41598-020-62397-x ↗
40. The enhanced performance of capacitive-type humidity sensors based on ZnO nanorods/WS2 nanosheets heterostructure10.1016/j.snb.2020.127810 ↗
41. Compositional engineering of the pi-conjugated small molecular VOPcPhO: Alq3 complex to boost humidity sensing10.1039/C7RA02525D ↗
42. Highly sensitive and full range detectable humidity sensor using PEDOT: PSS, methyl red and graphene oxide materials10.1038/s41598-019-51712-w ↗
43. Printed, fully metal oxide, capacitive humidity sensors using conductive indium tin oxide inks10.1021/acsaelm.0c00660 ↗
44. Enhanced capacitive humidity sensing performance at room temperature via hydrogen bonding of cyanopyridone-based oligothiophene donor10.3390/chemosensors9110320 ↗
45. Low temperature solution synthesis and characterization of ZnO nano-flowers10.1016/j.materresbull.2006.11.035 ↗
46. A barrier model for ZnO varistors10.1063/1.326549 ↗
47. Characterization of a polyamine microsphere and its adsorption for protein10.3390/ijms14010017 ↗
48. Effects of moisture on the thermomechanical properties of a polyurethane shape memory polymer10.1016/j.polymer.2005.12.051 ↗
49. Highly stable and sensitive resistive flexible humidity sensors by means of roll-to-roll printed electrodes and flower-like TiO2 nanostructures10.1016/j.ceramint.2018.09.276 ↗
50. Synthesis and characterization of 2D MXene: device fabrication for humidity sensing10.1016/j.jsamd.2021.08.003 ↗
51. Implementation of PVA-nanofibers heat absorption monitoring sensor for ultrasensitive detection of 2, 4-dinitrotoluene10.1109/JSEN.2019.2927187 ↗
52. Bio-compatible organic humidity sensor transferred to arbitrary surfaces fabricated using single-cell-thick onion membrane as both the substrate and sensing layer10.1038/srep30065 ↗
53. Bio-compatible organic humidity sensor based on natural inner egg shell membrane with multilayer crosslinked fiber structure10.1038/s41598-018-37186-2 ↗
54. Stable and fast-response capacitive humidity sensors based on a ZnO nanopowder/PVP-RGO multilayer10.3390/s17102415 ↗
55. A highly sensitive printed humidity sensor based on a functionalized MWCNT/HEC composite for flexible electronics application10.1039/C9NA00179D ↗
56. Paper as active layer in inkjet-printed capacitive humidity sensors10.3390/s17071464 ↗
57. Fully printed high performance humidity sensors based on two-dimensional materials10.1039/C7NR08115D ↗
58. All-printed humidity sensor based on graphene/methyl-red composite with high sensitivity (vol 105, pg 23, 2016)10.1016/j.carbon.2016.11.006 ↗