journal article·2025-06-01Open access

Silver nanowire infused hydrogel contact lenses for non-invasive intraocular pressure monitoring

Elham Alaei, Syed Ali Raza Bukhari, Tanzila Afrin, Robert J Campbell, Yongjun Lai

Flexible and Printed Electronics· Volume 10· Issue 2

Abstract

Abstract Flexible, hydrogel-based materials are now vital in advanced diagnostic devices, particularly in smart contact lenses for continuous health monitoring. This study introduces a novel composite material by infusing silver nanowires (AgNWs) into a hydrogel polymer, creating a flexible, sensitive contact lens capable of continuous intraocular pressure (IOP) monitoring. The fabrication process is streamlined to integrate seamlessly with industrial production, promoting scalability and mass manufacture. The effect of AgNW integration on the hydrogel’s Young’s modulus was assessed through tensile testing of flat sheet samples at 5%, 3%, and 1% nanowire concentrations by weight, yielding modulus values of 2.517, 2.081, and 1.669 MPa, respectively, with stiffness increasing alongside AgNW concentration. The device functions by detecting frequency shifts caused by impedance changes from structural reconfiguration of the nanowire network under applied pressure. To evaluate performance, lenses of various concentrations were rigorously tested for stability, repeatability, and sensitivity using synthetic, porcine, and human cadaveric eye models. Results indicated that higher AgNW concentrations achieved greater sensitivity, with peak sensitivities of 12, 30, and 18 kHz mmHg−1 recorded at a 5% concentration across the testing models. This material represents a promising candidate for scalable, high-performance IOP monitoring applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ocular Surface and Contact Lens · Advanced Fiber Optic Sensors · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. The evolution of flexible electronics: from nature, beyond nature, and to nature10.1002/advs.202001116 ↗
2. Stretchable electronics based on PDMS substrates10.1002/adma.202003155 ↗
3. Microfluidics for high pressure: integration on GaAs acoustic biosensors with a leakage-free PDMS based on bonding technology10.3390/mi13050755 ↗
4. Sweat-based noninvasive skin-patchable urea biosensors with photonic interpenetrating polymer network films integrated into PDMS chips10.1021/acssensors.0c01757 ↗
5. Design and characterization of three-axis high-range inductive tactile force sensor utilizing magnetorheological elastomer for robotic surgical applications10.1109/JSEN.2022.3222930 ↗
6. Development of a meso-scale multi-axis magnetic tactile sensor for robotic surgery
7. Highly linear and stable flexible temperature sensors based on laser‐induced carbonization of polyimide substrates for personal mobile monitoring10.1002/admt.202000014 ↗
8. Surface engineering on polyimide–silver films in low-cost, flexible humidity sensors10.1021/acsami.2c00503 ↗
9. Flexible inkjet-printed Patch antenna array on mesoporous PET substrate for 5G applications with stable RF performance after mechanical stress cycling10.1109/ECTC32862.2020.00285 ↗
10. Conducting polymer percolation gas sensor on a flexible substrate10.1039/D0TC02856H ↗
11. Engineered hydrogels in cancer therapy and diagnosis10.1016/j.tibtech.2017.06.015 ↗
12. Hydrogel‐based flexible electronics10.1002/adma.202205326 ↗
13. Wearable contact lens sensor for non-invasive continuous monitoring of intraocular pressure10.3390/mi12020108 ↗
14. Wireless smart contact lens for diabetic diagnosis and therapy10.1126/sciadv.aba3252 ↗
15. Zero‐order antibiotic release from multilayer contact lenses: nonuniform drug and diffusivity distributions produce constant‐rate drug delivery10.1002/adhm.201600775 ↗
16. A multifunctional smart soft contact lens device enabled by nanopore thin film for glaucoma diagnostics and in situ drug delivery10.1109/JMEMS.2019.2927232 ↗
17. Diurnal intraocular pressure variations: an analysis of 690 diurnal curves10.1136/bjo.76.5.280 ↗
18. Diurnal variation of intraocular pressure of normal-tension glaucoma: influence of sleep and arousal10.1016/S0161-6420(91)32297-8 ↗
19. Influence of diurnal variation on the intraocular pressure measurement of treated primary open-angle glaucoma during office hours10.1097/00061198-199612000-00009 ↗
20. 24-hour monitoring of intraocular pressure in glaucoma management: a retrospective review10.1097/00061198-200306000-00009 ↗
21. A capacitor-based sensor and a contact lens sensing system for intraocular pressure monitoring10.1088/0960-1317/26/1/015001 ↗
22. Wireless, passive strain sensor in a doughnut-shaped contact lens for continuous non-invasive self-monitoring of intraocular pressure10.1039/C9LC00735K ↗
23. A contact lens promising for non-invasive continuous intraocular pressure monitoring10.1039/C8RA10257K ↗
24. Highly transparent and sensitive graphene sensors for continuous and non-invasive intraocular pressure monitoring10.1021/acsami.0c02991 ↗
25. High resolution non-invasive intraocular pressure monitoring by use of graphene woven fabrics on contact lens10.1038/s41378-019-0078-x ↗
26. Correlation between corneal and contact lens deformation with changes in intraocular pressure for wearable monitoring systems10.1038/s41433-022-02285-y ↗
27. Contact lens-based intraocular pressure sensor10.3390/IECB2023-14577 ↗
28. Microfluidic contact lenses10.1002/smll.201704363 ↗
29. Non-invasive intraocular pressure monitoring with contact lens10.1136/bjophthalmol-2018-313714 ↗
30. A novel non‐invasive wearable sensor for intraocular pressure measurement10.1002/mds3.10086 ↗
31. Microfluidic contact lenses for unpowered, continuous and non-invasive intraocular pressure monitoring10.1016/j.sna.2019.04.050 ↗
32. The ophthalmic performance of hydrogel contact lenses loaded with silicone nanoparticles10.3390/polym12051128 ↗
33. Improvement of the surface wettability of silicone hydrogel contact lenses via layer-by-layer self-assembly technique10.1016/j.colsurfb.2015.10.006 ↗
34. Contact lenses
35. Intraocular pressure monitoring smart contact lens with high environmental stability10.1002/adfm.202400722 ↗
36. Nanoparticle–hydrogel composites: concept, design, and applications of these promising, multi‐functional materials10.1002/advs.201400010 ↗
37. A soft resistive acoustic sensor based on suspended standing nanowire membranes with point crack design10.1002/adfm.201910717 ↗
38. Room-temperature welding of silver telluride nanowires for high-performance thermoelectric film10.1021/acsami.9b14854 ↗
39. A highly sensitive electrochemical platform based on the bimetallic Pd@ Au nanowires network for organophosphorus pesticides detection10.1016/j.snb.2018.12.125 ↗
40. Failing forward: stability of transparent electrodes based on metal nanowire networks10.1002/adma.202004356 ↗
41. Programmability of nanowire networks10.1039/C4NR02338B ↗
42. Preparation of transparent conductive electrode via layer-by-layer deposition of silver nanowires and its application in organic photovoltaic device10.3390/nano10010046 ↗
43. Stretchable, skin‐mountable, and wearable strain sensors and their potential applications: a review10.1002/adfm.201504755 ↗
44. Smart contact lenses with a transparent silver nanowire strain sensor for continuous intraocular pressure monitoring10.1021/acsabm.1c00267 ↗
45. Parylene C-coated PDMS-based microfluidic microbial fuel cells with low oxygen permeability10.1016/j.jpowsour.2018.07.064 ↗
46. Eco-friendly, highly interpenetrated and slightly swollen pHEMA hydrogel foam for durable underwater superoleophobicity and emulsion separation10.1016/j.chemosphere.2024.142960 ↗
47. Determination of the modulus of elasticity of the human cornea10.3928/1081-597X-20071001-11 ↗
48. Mechanical properties of contact lens materials10.1097/ICL.0000000000000442 ↗
49. The probability of having glaucoma at different IOP levels10.1111/j.1755-3768.1991.tb04840.x ↗
50. A comparison of biomechanical properties between human and porcine cornea10.1016/S0021-9290(00)00219-0 ↗