journal article·2017-06-01

A flexible and stackable 3D interconnect system using growth-engineered carbon nanotube scaffolds

Di Jiang, Shuangxi Sun, Michael Edwards, Kjell Jeppson, Nan Wang, Yifeng Fu, Johan Liu

Publisher page

Abstract

Abstract One of the critical challenges for realizing flexible electronic systems for a wide range of applications is the development of materials for flexible and stackable interconnects. We propose and demonstrate a three-dimensional (3D) interconnect structure embedded in a polymeric substrate using metal-coated carbon nanotube (CNT) scaffolds. By using two different underlayer materials for the catalyst, one-step synthesis of a dual-height CNT interconnect scaffold was realized. The CNT scaffolds serve as flexible cores for both annular metal through-substrate-vias and for horizontal metal interconnect. The 3D-CNT network was fabricated on a silicon substrate, and once the scaffolds were covered by metal, they were embedded in a polymer serving as a flexible substrate after peel-off from the silicon substrate. The 3D-CNT interconnect network was exposed to mechanical bending and stretching tests while monitoring its electrical properties. Even after 300 cycles no significant increase of resistances was found. Electrically there is a trade-off between flexibility and conductivity due to the surface roughness of the scaffold. However, this is to some extent alleviated by the metalized sidewalls giving the horizontal wires a cross-sectional area larger than indicated by their footprint. For gold wires 200 nm thick, measurements indicated a resistivity of 18 μ Ω cm, a value less than one order of magnitude larger than that of bulk gold, and a value that is expected to improve as technology improves. The mechanical properties of the metalized scaffolds were simulated using a finite element model. The potential scale-up capability of the proposed 3D-CNT network was demonstrated by the stacking of two such polymer-embedded interconnect systems.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Carbon Nanotubes in Composites · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Chalmers University of Technology

Funding

European Commission · Chalmers Tekniska H??gskola

References (25)

Show source-provided references
1. Nanowire active-matrix circuitry for low-voltage macroscale artificial skin10.1038/nmat2835 ↗
2. A hemispherical electronic eye camera based on compressible silicon optoelectronics10.1038/nature07113 ↗
3. Active devices based on organic semiconductors for wearable applications10.1109/TITB.2010.2044798 ↗
4. 2013
5. Multilayer high density flex technology10.1109/ECTC.1999.776353 ↗
6. A review of carbon nanotube- and graphene-based flexible thin-film transistors10.1002/smll.201203154 ↗
7. Large-scale pattern growth of graphene films for stretchable transparent electrodes10.1038/nature07719 ↗
8. A stretchable carbon nanotube strain sensor for human-motion detection10.1038/nnano.2011.36 ↗
9. Cross-stacked superaligned carbon nanotube films for transparent and stretchable conductors10.1002/adfm.201100306 ↗
10. Deformable transparent all-carbon-nanotube transistors10.1063/1.3683517 ↗
11. Flexible, stretchable, transparent conducting films made from superaligned carbon nanotubes10.1002/adfm.200901960 ↗
12. Polymer-embedded carbon nanotube ribbons for stretchable conductors10.1002/adma.200904426 ↗
13. Super-stretchable, transparent carbon nanotube-based capacitive strain sensors for human motion detection10.1038/srep03048 ↗
14. The integration of CNTs-based flexible tactile sensor and flexible circuit by polymer molding process10.1109/TRANSDUCERS.2011.5969492 ↗
15. Embedded fin-like metal/CNT hybrid structures for flexible and transparent conductors10.1002/smll.201503091 ↗
16. Simultaneous growth of self-patterned carbon nanotube forests with dual height scales10.1039/c2nr30258f ↗
17. Strain-engineered manufacturing of freeform carbon nanotube microstructures10.1038/ncomms5512 ↗
18. Vertically aligned CNT-Cu nano-composite material for stacked through-silicon-via interconnects10.1088/0957-4484/27/33/335705 ↗
19. Millimeter-tall single-walled carbon nanotube forests grown from ethanol10.1016/j.carbon.2010.02.024 ↗
20. Millimeter-thick single-walled carbon nanotube forests: hidden role of catalyst support10.1143/JJAP.46.L399 ↗
21. Paper-mediated controlled densification and low temperature transfer of carbon nanotube forests for electronic interconnect application10.1016/j.mee.2012.11.007 ↗
22. Metal coating on suspended carbon nanotubes and its implication to metal–tube interaction10.1016/S0009-2614(00)01162-3 ↗
23. Vertically stacked carbon nanotube-based interconnects for through silicon via application10.1109/LED.2015.2415198 ↗
24. Integration of CNTs in 3D-IC interconnects: a nondestructive approach for the precise characterization and elucidation of interfacial properties10.1039/C4TA04715J ↗
25. Measurement of nonlinear mechanical properties of PDMS elastomer10.1016/j.mee.2010.12.108 ↗