Mechanism of NH 3 gas sensing by SnO 2 /PANI nanocomposites: charge transport and temperature dependence study
Source abstract
Abstract
Abstract Metal oxide-Polyaniline (PANI) nanocomposites have shown improved gas sensing characteristics that can be attributed to the formation of a p–n junction between the n-type metal oxide and the p-type PANI. The charge transport, grain boundary depletion region, and intragrain resistance are studied to understand the gas sensing mechanism of pristine metal oxide gas sensors. However, gas sensing mechanisms for metal-oxide/PANI nanocomposites have not been studied extensively. In this work, we have studied the gas sensing mechanism of SnO 2 /PANI nanocomposites using electrochemical impedance spectroscopy, and temperature dependent gas sensing experiments. Well-defined SnO 2 nanoclusters were observed in the PANI matrix. The n-type SnO 2 was covered by p-type PANI, and a depletion region was formed at the interface. The presence of the p–n junction depletion region was confirmed by impedance spectroscopy. The polarons in PANI were trapped by NH 3 leading to a change in the width of the conducting path due to rearrangement of charge carriers along the depletion region. The change in the conduction path, along with the trapped polarons, enhanced the sensor response. For higher loadings of SnO 2 , the depletion region was deformed, and the sensor response decreased due to non-uniform boundaries. 1 wt% SnO 2 with respect to aniline precursor in in situ synthesis showed the best response of 37.8% for 100 ppm NH 3 at 35 °C. The response was stable for low humidity levels up to 51%RH. The response increased for higher humidity levels. The sensor response increased from 0.17 to 2.99 upon bending 1000 times at 7.8 mm diameter due to cracks in the surface. The sensor showed only 10% variation in response after 9 months.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Conducting polymers and applications · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Ammonia gas sensors: a comprehensive review10.1016/j.talanta.2019.06.034 ↗
2. Ammonia sensors and their applications—a review10.1016/j.snb.2004.11.054 ↗
3. Point of care monitoring of hemodialysis patients with a breath ammonia measurement device based on printed polyaniline nanoparticle sensors10.1021/ac403472d ↗
4. Au nanocomposite based chemiresistive ammonia sensor for health monitoring10.1021/acssensors.5b00013 ↗
5. MoSe2 crystalline nanosheets for room-temperature ammonia sensing10.1021/acsanm.0c02011 ↗
6. Ammonia gas sensor response of a vertical zinc oxide nanorod-gold junction diode at room temperature10.1021/acssensors.0c01769 ↗
7. Efficient NH3 detection based on MOS sensors coupled with catalytic conversion10.1021/acssensors.0c00836 ↗
8. Locally grown SnO2 NWs as low power ammonia sensor10.1016/j.proeng.2015.08.614 ↗
9. Sensing response of semiconducting metal oxides decorated multiwalled carbon nanotubes towards toxic gases
10. Highly sensitive polyaniline-coated fiber gas sensors for real-time monitoring of ammonia gas10.1039/C9RA04005F ↗
11. Morphology, structure, and gas sensing performance of conductive polymers and polymer/carbon black composites used for volatile compounds detection10.1109/JSEN.2017.2685180 ↗
12. Flexible room temperature ammonia sensor based on polyaniline10.1016/j.snb.2016.08.173 ↗
13. All-aerosol-jet-printed highly sensitive and selective polyaniline-based ammonia sensors: a route toward low-cost, low-power gas detection10.1007/s10853-021-06080-0 ↗
14. Facile synthesis of the composites of polyaniline and TiO2 nanoparticles using self-assembly method and their application in gas sensing10.3390/nano9040493 ↗
15. A high-performance flexible gas sensor based on self-assembled PANI-CeO2 nanocomposite thin film for trace-level NH3 detection at room temperature10.1016/j.snb.2017.12.022 ↗
16. Room temperature gas sensor based on tin dioxide@ polyaniline nanocomposite assembled on flexible substrate: ppb-level detection of NH310.1016/j.snb.2019.126970 ↗
17. Preparation, characterization and comparative NH3-sensing characteristic studies of PANI/inorganic oxides nanocomposite thin films10.1016/S1005-0302(10)60064-3 ↗
18. Review—recent advances in electrochemical impedance spectroscopy based toxic gas sensors using semiconducting metal oxides10.1149/1945-7111/ab77a0 ↗
19. Electrical characterization of semiconductor oxide-based gas sensors using impedance spectroscopy: a review10.1166/rase.2016.1109 ↗
20. Discerning specific gas sensing at room temperature by ultrathin SnO2 films using impedance approach10.1016/j.snb.2012.07.110 ↗
21. Charge carrier transport in nanocrystalline SnO2 thin film sensor and temperature dependence of toxic gas sensitivity10.1016/j.snb.2016.06.163 ↗
22. A dibutyl phthalate sensor based on a nanofiber polyaniline coated quartz crystal monitor10.3390/s130303765 ↗
23. Adsorption kinetics of optochemical NH3 gas sensing with semiconductor polyaniline films10.1016/S0925-4005(01)00984-4 ↗
24. Electrospun polyaniline fibers as highly sensitive room temperature chemiresistive sensors for ammonia and nitrogen dioxide gases10.1002/adfm.201400185 ↗
25. Theory of gas-diffusion controlled sensitivity for thin film semiconductor gas sensor10.1016/S0925-4005(01)01072-3 ↗
26. Analytical expression for concentration and sensitivity of a thin film semiconductor gas sensor10.1016/j.asej.2014.01.004 ↗
27. Theoretical approach to the gas response of oxide semiconductor film devices under control of gas diffusion and reaction effects10.1016/j.snb.2010.01.018 ↗
28. The room temperature gas sensor based on polyaniline@flower-like WO3 nanocomposites and flexible PET substrate for NH3 detection10.1016/j.snb.2017.11.081 ↗
29. Fabrication of water-dispersible and highly conductive PSS-doped PANI/graphene nanocomposites using a high-molecular weight PSS dopant and their application in H2S detection10.1039/C4NR04413D ↗
30. Polymer of chitosan with ZnO addition to optimize high responsivity and sensitivity in sensor film10.1063/5.0016439 ↗
31. Syntheses and applications of conducting polymer polyaniline nanofibers10.1351/pac200678010015 ↗
32. Interface design of SnO2@PANI nanotube with enhanced sensing performance for ammonia detection at room temperature10.3389/fchem.2020.00383 ↗
33. Zfit
34. Using a PEDOT:PSS modified electrode for detecting nitric oxide gas10.1016/j.snb.2009.04.041 ↗
35. Nanostructured polyaniline/poly(styrene-butadiene-styrene) composite fiber for use as highly sensitive and flexible ammonia sensor10.1016/j.synthmet.2017.09.012 ↗
36. ZnO assisted polyaniline nanofibers and its application as ammonia gas sensor10.1016/j.snb.2013.09.106 ↗
37. Polyaniline: the infrared spectroscopy of conducting polymer nanotubes (IUPAC technical report)10.1351/PAC-REP-10-02-01 ↗
38. Spectroscopic and electrical characterization of some aniline oligomers and polyaniline10.1016/0379-6779(86)90167-0 ↗
39. Pavia · 2015
40. Crosslinked carbon nanotubes/polyaniline composites as a pseudocapacitive material with high cycling stability10.3390/nano5021034 ↗
41. Microwave-assisted synthesis and investigation of SnO2 nanoparticles10.1016/j.matlet.2009.01.032 ↗
42. Effect of moisture and molecular weight of polyaniline on H2S sensing characteristics10.1016/j.snb.2021.130323 ↗
43. Field-effect transistor with polyaniline thin film as semiconductor10.1016/S0379-6779(97)80879-X ↗
44. Electrical and optical studies in polyaniline nanofibre–SnO2 nanocomposites10.1007/s12034-013-0431-x ↗
45. A resistive type humidity sensor based on crystalline tin oxide nanoparticles encapsulated in polyaniline10.1007/s00604-015-1678-2 ↗
46. Photoemission spectroscopy study of structural defects in molybdenum disulfide (MoS2 grown by chemical vapor deposition (CVD)10.1039/C9CC01577A ↗
47. Ternary manganese ferrite/graphene/polyaniline nanostructure with enhanced electrochemical capacitance performance10.1016/j.jpowsour.2014.05.048 ↗
48. Strongly coupled manganese ferrite/carbon black/polyaniline hybrid for low-cost supercapacitors with high rate capability10.1016/j.electacta.2015.10.139 ↗
49. XPS study of self-doped conducting polyaniline and parent systems10.1021/ma00015a030 ↗
50. Polyaniline @ porous nanosphere SnO2/Zn2SnO4 nanohybrid for selective room temperature flexible NH3 sensor10.1016/j.snb.2020.128218 ↗
51. Practical guides for x-ray photoelectron spectroscopy (XPS): interpreting the carbon 1s spectrum10.1116/6.0000682 ↗
52. Enhanced room temperature gas sensor based on Au-loaded mesoporous In2O3 nanospheres@polyaniline core-shell nanohybrid assembled on flexible PET substrate for NH3 detection10.1016/j.snb.2018.08.120 ↗
53. Practical guide for curve fitting in x-ray photoelectron spectroscopy10.1116/6.0000377 ↗
54. Charge transport through polyaniline incorporated electrically conducting functional paper10.1021/acs.jpcc.5b08650 ↗
55. Analog and bipolar resistive switching in pn junction of n-type ZnO nanowires on p-type Si substrate10.1063/1.4817838 ↗
56. Bipolar resistive switching and non-volatile memory properties of MnO2-polyaniline (PANI)10.1016/j.mtla.2021.101026 ↗
57. Effects of IGZO film thickness on H2S gas sensing performance: response, excessive recovery, low-frequency noise, and signal-to-noise ratio10.1016/j.snb.2021.130148 ↗
58. Nomenclature in evaluation of analytical methods including detection and quantification capabilities (IUPAC recommendations 1995)10.1351/pac199567101699 ↗
59. Wexler · 2014
60. Ammonia gas sensing properties of CSA doped PANi-SnO2 nanohybrid thin films10.1016/j.synthmet.2013.09.032 ↗
61. The investigation of reduced graphene oxide@ SnO2–polyaniline composite thin films for ammonia detection at room temperature10.1007/s10854-014-2472-3 ↗
62. Measurements on room temperature gas sensing properties of CSA doped polyaniline–ZnO nanocomposites10.1016/j.measurement.2011.12.012 ↗
63. Studies on tin oxide-intercalated polyaniline nanocomposite for ammonia gas sensing applications10.1016/j.snb.2009.02.012 ↗
64. Room temperature ammonia sensor based on copper nanoparticle intercalated polyaniline nanocomposite thin films10.1016/j.apsusc.2015.02.164 ↗
65. Electrical and structural characterization of plasma polymerized polyaniline/TiO2 heterostructure diode: a comparative study of single and bilayer TiO2 thin film electrode10.1166/jnn.2011.3747 ↗
66. Electrophoretically deposited polyaniline/ZnO nanoparticles for p–n heterostructure diodes10.1016/j.spmi.2009.09.007 ↗
67. Characterizaton of polyaniline blends with AC impedance measurements10.1016/0379-6779(94)02432-X ↗
68. Conducting polyaniline-electrical charge transportation10.4236/msa.2013.41001 ↗
69. Development of 2D SnO2 /rGO nano-composites for H2S gas sensor using electrochemical impedance spectroscopy at room temperature10.1166/sl.2019.4074 ↗
70. Sze · 2006
71. Electrospun polyaniline/poly(ethylene oxide) composite nanofibers based gas sensor10.1002/elan.201300641 ↗
72. Humidity sensing properties of transferable polyaniline thin films formed at the air–water interface10.1039/C6RA20536D ↗
73. Gas sensors based on conducting polymers10.3390/s7030267 ↗