journal article·2022-03-01

A stable 4-bit ALU design for printed devices

JunHa Suk, ChanYeop Ahn, S M Mojahidul Ahsan, SoYoung Kim

Publisher page

Abstract

Abstract Printed devices fabricated using roll-to-roll (R2R) printing technology have been used in low-cost Internet of Things (IoTs), smart packaging and bio-chips. As the area of applications of printed devices broadens, arithmetic units in digital design need to be implemented. In this paper, we propose a stable 4-bit arithmetic logic unit (ALU) design using a minimum number of transistors that can overcome the limitations of printed devices. We propose the use of a 2:1 transmission gate (TG) multiplexer structure and hybrid 16T full-adder to construct the ALU. New design methods are applied to reduce the number of inverter stages added to overcome the voltage degradation. Using this approach reduces the total number of transistors used in the design from 276 to 153, compared to the conventional design, with significant improvements in delay and power performance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Low-power high-performance VLSI design · Quantum-Dot Cellular Automata · VLSI and FPGA Design Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Scalability of carbon-nanotube based thin film transistors for flexible electronic devices manufactured using an all roll-to-roll gravure printing system10.1038/srep14459 ↗
2. Fully printed and encapsulated SWCNT-based thin film transistors via a combination of R2R gravure and inkjet printing10.1021/acsami.6b06838 ↗
3. Bridging R2R printed wireless 1 bit-code generator with an electrophoretic QR code acting as WORM for NFC carrier enabled authentication label10.1002/admt.201900935 ↗
4. Fully R2R-printed carbon-nanotube-based limitless length of flexible active matrix for electrophoretic display application10.1002/aelm.201901431 ↗
5. The first step towards a R2R printing foundry via a complementary design rule in physical dimension for fabricating flexible 4-bit code generator10.1002/aelm.202000770 ↗
6. A CPU on a plastic film substrate
7. A flexible 8b asynchronous microprocessor based on low temperature poly-silicon TFT technology
8. RF CPUs on glass and plastic substrates fabricated by TFT transfer technology
9. An 8-bit, 40-instructions-per-second organic microprocessor on plastic foil10.1109/JSSC.2011.2170635 ↗
10. 8b Thin-film microprocessor using a hybrid oxide-organic complementary technology with inkjet-printed P2ROM memory
11. A thin-film microprocessor with inkjet print-programmable memory10.1038/srep07398 ↗
12. Fully gravure printed half adder on plastic foils10.1109/LED.2011.2165695 ↗
13. Fully gravure-printed D flip-flop on plastic foils using single-walled carbon-nanotube-based TFTs10.1109/LED.2011.2118732 ↗
14. BSIM3v3.2 MOSFET Model User’s Manual
15. LTSPICE IV Getting Started Guide (User’s Manual)
16. Kang · 2015
17. Low-power and fast full adder by exploring new XOR and XNOR gates10.1109/TVLSI.2018.2820999 ↗
18. High-speed hybrid-logic full adder using high-performance 10-T XOR–XNOR cell10.1109/TVLSI.2020.2983850 ↗
19. Performance analysis of a low-power high-speed hybrid 1-bit full adder circuit10.1109/TVLSI.2014.2357057 ↗
20. A new cell for low power adders10.1109/ISCAS.1996.541898 ↗
21. A 14-transistor CMOS full adder with full voltage-swing nodes10.1109/SIPS.1999.822379 ↗
22. Design and analysis of stable full adder structure for SWCNT-based printed electronics
23. Design and analysis of stable adder/subtractor for printed electronics using gravure printing