journal article·2023-06-01Open access

Low-cost thin film patch antennas and antenna arrays with various background wall materials for indoor wireless communications

Juho Kerminen, Boxuan Xie, Lauri Mela, Alp Karakoç, Kalle Ruttik, Riku Jäntti

Abstract

Abstract The present study introduces an inkjet-printed flexible coplanar waveguide patch antenna array concept. Single antenna and four-element antenna arrays were characterized, which were attached to a subminiature version A connector via an innovative solderless, 3D-printed ‘plug-and-play-type’ tightener. Furthermore, indoor wireless communication and Internet of Things scenarios with commonly used wall materials including gypsum and plywood boards, on which patch antennas and antenna arrays can be attached, were also presented. In order to validate the concept, design and fabrication iterations in parallel with numerical and experimental investigations were executed. To elaborate, single antenna and antenna array configurations without and with wall materials were characterized to see their functionality at 2.4 GHz resonance frequency and beyond 300 MHz bandwidth, respectively. The results demonstrate that the investigated configurations fulfill short-range radio transmission and can be utilized, e.g., for indoor backscattering-type communications and wireless sensing applications, as an affordable and versatile alternative to their conventional counterparts. Being attached to their corresponding background materials, single-antenna specimens were measured to have return losses beyond 18 dB and peak gains around 1 dBi, while higher peak gains above 6 dBi were detected for antenna arrays. Moreover, the antenna arrays can enable multiple-input and multiple-output communication. The proposed arrays had diversity performance in terms of return losses higher than 15 dB, isolation of more than 20 dB, envelope correlation coefficient <0.001, diversity gain >9.95 dB, mean effective gain <−3 dB, power ratio factor <0.5 dB, and channel capacity loss <0.4 bits/s/Hz.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Antenna Design and Analysis · Advanced Antenna and Metasurface Technologies · Energy Harvesting in Wireless Networks

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Paper electronics10.1002/adma.201004692 ↗
2. Antenna of silver nanoparticles mounted on a flexible polymer substrate constructed using inkjet print technology10.7567/JJAP.55.02BB13 ↗
3. Planar millimeter-wave antenna on low-cost flexible pet substrate for 5g applications10.1109/EuCAP.2016.7481680 ↗
4. Energy harvesting using a low-cost rectenna for internet of things (IoT) applications10.1109/ACCESS.2018.2834392 ↗
5. A modified meander line microstrip patch antenna with enhanced bandwidth for 2.4 GHz ism-band internet of things (IoT) applications10.1109/ACCESS.2019.2940049 ↗
6. A review on printed electronics: fabrication methods, inks, substrates, applications and environmental impacts10.3390/jmmp5030089 ↗
7. A compact evolved antenna for 5g communications10.1038/s41598-022-14447-9 ↗
8. Characterization of low-cost inkjet printed-photonic cured strain gauges for remote sensing and structural monitoring applications10.17515/resm2021.360me1029 ↗
9. A compact polyimide-based uwb antenna for flexible electronics10.1109/LAWP.2012.2199956 ↗
10. A wideband pet inkjet-printed antenna for uhf rfid10.1109/LAWP.2013.2287307 ↗
11. Performance study of screen-printed textile antennas after repeated washing10.2478/v10304-012-0049-x ↗
12. A 2.45 GHz rectenna screen-printed on polycotton for on-body rf power transfer and harvesting10.1109/WPT.2015.7140161 ↗
13. Flexible radio-frequency identification (rfid) tag antenna for sensor applications10.3390/s18124212 ↗
14. Circularly polarized wearable antenna based on ninjaflex-embedded conductive fabric10.1155/2019/3059480 ↗
15. Wearable dual-band dual-polarization button antenna for wban applications10.1109/LAWP.2020.3028868 ↗
16. A broadband transparent antenna integrated with an indoor solar cell for wlan applications10.1109/IEEECONF35879.2020.9329530 ↗
17. Flexible inkjet-printed graphene antenna on kapton10.1088/2058-8585/ac0ac1 ↗
18. Manufacturing considerations for the development of reconfigurable antennas using inexpensive inkjet printing10.1109/TCPMT.2022.3178516 ↗
19. An mxene based flexible patch antenna for pressure and level sensing applications10.1016/j.flatc.2022.100367 ↗
20. Silver nanoparticle inkjet-printed multiband antenna on synthetic paper material for flexible devices10.1016/j.aej.2021.11.060 ↗
21. A cpw-fed flexible uwb antenna for IoT applications10.1007/s00542-018-4260-0 ↗
22. A compact wide band textile mimo antenna with very low mutual coupling for wearable applications10.1002/mmce.21769 ↗
23. Inkjet-printed graphene-based 1×2 phased array antenna10.3390/mi11090863 ↗
24. Flexible inkjet-printed patch antenna array on mesoporous pet substrate for 5g applications with stable rf performance after mechanical stress cycling10.1109/ECTC32862.2020.00285 ↗
25. 2×2 textile rectenna array with electromagnetically coupled microstrip patch antennas in the 2.4 GHz wifi band10.3390/electronics10121447 ↗
26. Flexible patch antenna array operating at microwaves based on thin composite material10.1109/ACCESS.2022.3218342 ↗
27. Investigation and design of enhanced decoupled uwb mimo antenna for wearable applications10.1002/mop.32699 ↗
28. Quad-port uwb mimo footwear antenna for wearable applications10.1109/TAP.2022.3177481 ↗
29. 3-d-printing-based selective-ink-deposition technique enabling complex antenna and rf structures for 5g applications up to 6 GHz10.1109/TCPMT.2019.2919187 ↗
30. Printable materials for the realization of high performance rf components: challenges and opportunities10.1155/2018/9359528 ↗
31. Smart coat with a fully-embedded textile antenna for IoT applications10.3390/s16060938 ↗
32. A compact kapton-based inkjet-printed multiband antenna for flexible wireless devices10.1109/LAWP.2015.2424681 ↗
33. Recent advances in fabrication methods for flexible antennas in wearable devices: state of the art10.3390/s19102312 ↗
34. Dielectric permittivity measurement of paper substrates using commercial inkjet printers10.1016/j.proeng.2016.11.324 ↗
35. Passively-coded embedded microwave sensors for materials characterization and structural health monitoring (SHM)
36. Two methods for the measurement of substrate dielectric constant10.1109/TMTT.1987.1133722 ↗
37. Balanis · 2015
38. Design of rectangular patch antenna array using different feeding technique10.1109/CEEE.2017.8412882 ↗
39. Photonic curing explanation and application to printing copper traces on low temperature substrates10.4071/isom-2011-THA4-Paper6 ↗
40. Keysight
41. Diversity and mimo performance evaluation of compact multi element antennas with common phase center10.1109/ICECOM.2007.4544418 ↗
42. Antenna diversity in mobile communications10.1109/T-VT.1987.24115 ↗
43. Exact representation of antenna system diversity performance from input parameter description10.1049/el:20030495 ↗
44. Printed multi-band mimo antenna systems and their performance metrics [wireless corner]10.1109/MAP.2013.6735522 ↗
45. Radiation efficiency, correlation, diversity gain and capacity of a six-monopole antenna array for a mimo system: theory, simulation and measurement in reverberation chamber10.1049/ip-map:20045031 ↗
46. Compact integrated diversity antenna for wireless communications10.1109/8.931154 ↗
47. Angular power distribution and mean effective gain of mobile antenna in different propagation environments10.1109/TVT.2002.800639 ↗
48. A reduced size dual port mimo dra with high isolation for 4g applications10.1002/mmce.20884 ↗
49. Analysis of mutual coupling, correlations and tarc in wibro mimo array antenna10.1109/LAWP.2007.893109 ↗
50. Wideband printed mimo/diversity monopole antenna for wifi/wimax applications10.1109/TAP.2012.2186247 ↗