journal article·2022-06-01

Fabrication of RF elements on thin plastic substrate using laser engraving technique

Nickolas Littman, G O’Keefe Steven, Amir Galehdar, Hugo G Espinosa, David V Thiel

Publisher page

Abstract

Abstract A novel fabrication process using a laser machining is proposed, allowing for the creation of arbitrary conductor geometries on an ultrathin dielectric substrate. During the engraving process, a thin aluminum layer is removed from a Mylar substrate, leaving a periodic conductive array. This process provides several advantages over existing techniques and may open additional applications due to the ability to economically create ultra-thin, conformal, optically transparent, light weight surfaces. The proposed technique is modelled and validated through experimental measurements of fabricated simple band-stop square and circle loop frequency selective surfaces (FSSs). Good agreement is observed between the simulated and measured results with resonances 9.9 GHz and 10 GHz for the square loop and 14.2 GHz and 14.4 GHz for the circle loop.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Antenna and Metasurface Technologies · Optical Coatings and Gratings · Microwave Engineering and Waveguides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Munk · 2000
2. Vardaxoglou · 1997
3. Optically transparent frequency selective surfaces on flexible thin plastic substrates10.1063/1.4907929 ↗
4. Design of security paper with frequency reflection characteristics10.3390/s18072263 ↗
5. Ultrathin and flexible screen-printed metasurfaces for EMI shielding applications10.1109/TEMC.2011.2159509 ↗
6. Microwave band FSS in optically transparent conducting layers performance of ring elements arrays10.1002/(SICI)1098-2760(19971005)16:2<61::AID-MOP1>3.0.CO;2-G ↗
7. Resonant metal-mesh bandpass filters for the far infrared10.1364/AO.33.006046 ↗
8. Metal mesh resonant filters for tetrahertz frequencies10.1364/AO.47.006064 ↗
9. Printed frequency selective surfaces on textiles10.1049/el.2014.0955 ↗
10. Textile frequency selective surfaces10.1109/LMWC.2017.2750031 ↗
11. Low-cost inkjet-printed FSS band-pass filters for 100 and 300 GHz10.1109/EuCAP.2016.7481780 ↗
12. Inkjet printing of resistively loaded FSS for microwave absorbers10.1049/el.2015.0696 ↗
13. Direct printing of flexible metallic millimetre-wave frequency selective surfaces
14. 3D-printed FSS using printing filaments with enclosed metal particles
15. 3D printed all-dielectric frequency selective surface with large bandwidth and field-of-view10.1109/TAP.2015.2388541 ↗
16. Novel 3D-printed reconfigurable origami frequency selective surfaces with flexible inkjet- printed conductor traces
17. Laser machined microsystems for active frequency selective surfaces IEEE/MTT-S
18. Microfabrication of low cost frequency selective surface for tetrahertz wave by laser ablation10.1007/s11664-019-07008-w ↗
19. Laser prototyping of microwave circuits in lTCC technology10.1109/TMTT.2009.2033846 ↗
20. A wearable body condition sensor system with wireless feedback alarm functions10.1002/adma.202008701 ↗
21. Mulitmodal plant healthcare flexible sensor system10.1021/acsnano.0c03757 ↗
22. Free space permittivity and permeability measurements at microwave frequencies