Hydrothermal synthesis of zinc oxide/PEDOT:PSS composite for flexible temperature sensor application
Source abstract
Abstract
Abstract A flexible and printable temperature sensor was proposed for a fast detection of temperature measurements. A hybrid composite of zinc oxide (ZnO) and a conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonicacid) (PEDOT:PSS) was utilized as the temperature-sensing layer. An interdigitated electrodes structure based on silver (Ag) ink was used to electrically connect the composite through a facile drop-casting technique. A standout aspect of this work is the presentation of ZnO/PEDOT:PSS as a temperature-sensing layer. The PEDOT:PSS flakes were connected by hydrothermally prepared ZnO nanorods, which increased the composite sheets’ electrical conductivity. The linearity, sensitivity, stability and dynamic response of the flexible sensor were examined from a temperature of 29 °C–60 °C. The sensor has high sensitivity of 1.06% °C−1 with response and recovery times of 5 s and 12.7 s, respectively. This work clearly demonstrates the potential of ZnO/PEDOT:PSS composite for flexible temperature sensor and adds to the rapidly expanding field of personalized mobile healthcare.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (82)
Show source-provided references
1. Sensors and imaging for wound healing: a review10.1016/j.bios.2012.09.029 ↗
2. Flexible wound healing system for pro-regeneration, temperature monitoring and infection early warning10.1016/j.bios.2020.112275 ↗
3. Heart disease detection by using machine learning algorithms and a real-time cardiovascular health monitoring system10.4236/wjet.2018.64057 ↗
4. Femoro-iliacal artery versus pulmonary artery core temperature measurement during therapeutic hypothermia: an observational study10.1016/j.resuscitation.2012.11.022 ↗
5. Impacts of mercury pollution controls on atmospheric mercury concentration and occupational mercury exposure in a hospital10.1007/s12011-015-0391-7 ↗
6. A new frontier of printed electronics: flexible hybrid electronics10.1002/adma.201905279 ↗
7. Fabrication of highly conductive and flexible printed electronics by low temperature sintering reactive silver ink10.1016/j.apsusc.2018.07.187 ↗
8. A review on printed electronics: fabrication methods, inks, substrates, applications and environmental impacts10.3390/jmmp5030089 ↗
9. Screen-printing of a highly conductive graphene ink for flexible printed electronics10.1021/acsami.9b04589 ↗
10. Smart manufacturing technologies for printed electronics10.5772/intechopen.89377 ↗
11. Stable and biocompatible carbon nanotube ink mediated by silk protein for printed electronics10.1002/adma.202000165 ↗
12. Aerosol-jet-printed preferentially aligned carbon nanotube twin-lines for printed electronics10.1021/acsami.9b15060 ↗
13. Laser-induced graphitization of a forest-based ink for use in flexible and printed electronics10.1038/s41528-020-0080-2 ↗
14. Silver nanoparticles based ink with moderate sintering in flexible and printed electronics10.3390/ijms20092124 ↗
15. Registration error analysis and compensation of roll-to-roll screen printing system for flexible electronics10.1088/2058-8585/abf987 ↗
16. Printed electronics (PE) as an enabling technology to realize flexible mass customized smart applications10.1016/j.procir.2021.01.062 ↗
17. Printed electronics as prepared by inkjet printing10.3390/ma13030704 ↗
18. Review of digital printing technologies for electronic materials10.1088/2058-8585/abc8ca ↗
19. One-step deposition of hydrophobic coatings on paper for printed-electronics applications10.1007/s10570-019-02326-y ↗
20. Preparation of silver nanoparticles with hyperbranched polymers as a stabilizer for inkjet printing of flexible circuits10.1039/C8NJ05639K ↗
21. Flexible temperature sensor fabrication using photolithography technique10.1016/j.tsep.2021.100857 ↗
22. A flexible bimodal sensor array for simultaneous sensing of pressure and temperature10.1002/adma.201302869 ↗
23. A printed MWCNTs/PDMS based flexible resistive temperature detector10.1109/EIT48999.2020.9208334 ↗
24. Vertically integrated CMOS-MEMS capacitive humidity sensor and a resistive temperature detector for environment application10.1109/TRANSDUCERS.2017.7994333 ↗
25. A flexible resistive temperature detector (RTD) based on in-situ growth of patterned Ag film on polyimide without lithography10.1016/j.mee.2019.111052 ↗
26. Pt thin-film resistance temperature detector on flexible Hastelloy tapes10.1016/j.vacuum.2020.109966 ↗
27. Nickel based printed resistance temperature detector on flexible polyimide substrate10.1109/ICSENS.2018.8589549 ↗
28. Flexible temperature sensors based on carbon nanomaterials10.1039/D0TB02451A ↗
29. Self‐calibrated, sensitive, and flexible temperature sensor based on 3D chemically modified graphene hydrogel10.1002/aelm.202001084 ↗
30. A low‐operating‐power and flexible active‐matrix organic‐transistor temperature‐sensor array10.1002/adma.201600040 ↗
31. A carbon nanotube based NTC thermistor using additive print manufacturing processes10.1016/j.sna.2018.05.042 ↗
32. Polysilicon-based flexible temperature sensor for brain monitoring with high spatial resolution10.1088/1361-6439/aa4e99 ↗
33. Flexible conductive Ag nanowire/cellulose nanofibril hybrid nanopaper for strain and temperature sensing applications10.1016/j.scib.2020.02.020 ↗
34. Electrical and thermal properties of silver nanowire fabricated on a flexible substrate by two-beam laser direct writing for designing a thermometer10.1039/C8RA03280G ↗
35. Wireless real-time temperature monitoring of blood packages: silver nanowire-embedded flexible temperature sensors10.1021/acsami.8b11928 ↗
36. High-performance temperature sensor based on silver nanowires10.1016/j.mtcomm.2019.100546 ↗
37. Environment-friendly carbon nanotube based flexible electronics for noninvasive and wearable healthcare10.1039/C6TC02708C ↗
38. Carbon nanotube/PEDOT: PSS composite-based flexible temperature sensor with enhanced response and recovery time10.1109/FLEPS49123.2020.9239431 ↗
39. Design guidelines of laser reduced graphene oxide conformal thermistor for IoT applications10.1016/j.sna.2018.03.014 ↗
40. Facile fabrication of a fast-response flexible temperature sensor via laser reduced graphene oxide for contactless human-machine interface10.1016/j.carbon.2021.10.064 ↗
41. Flexible laser-reduced graphene oxide thermistor for ubiquitous electronics
42. A flexible temperature sensor based on reduced graphene oxide for robot skin used in internet of things10.3390/s18051400 ↗
43. Fully printed PEDOT: PSS-based temperature sensor with high humidity stability for wireless healthcare monitoring10.1038/s41598-019-56847-4 ↗
44. Comparison of organic thermistors based on PEDOT:PSS and PEDOT:tos thin films under various thermal and humidity conditions10.1016/j.snb.2018.08.054 ↗
45. All inkjet-printed temperature sensors based on PEDOT:PSS10.1109/ACCESS.2022.3176822 ↗
46. Highly sensitive interdigitated thermistor based on PEDOT:PSS for human body temperature monitoring10.1088/2058-8585/acaabc ↗
47. Tuned transport behavior of the IPA-treated PEDOT:PSS flexible temperature sensor via screen printing10.1007/s11664-021-08740-y ↗
48. Recent progress on thermo-electrical properties of conductive polymer composites and their application in temperature sensors10.30919/es8d1129 ↗
49. Heating-induced negative temperature coefficient effect in conductive graphene/polymer ternary nanocomposites with a segregated and double-percolated structure10.1039/C7TC02472J ↗
50. Flexible temperature sensors: a review10.1016/j.sna.2020.112282 ↗
51. Inkjet-printed CNT/PEDOT:PSS temperature sensor on a textile substrate for wearable intelligent systems10.1109/JSEN.2021.3070073 ↗
52. MWCNT ink with PEDOT:PSS as a multifunctional additive for energy efficient flexible heating applications10.1016/j.apmt.2021.100987 ↗
53. Fabrication of high-sensitivity skin-attachable temperature sensors with bioinspired microstructured adhesive10.1021/acsami.7b17727 ↗
54. Printed temperature sensor based on PEDOT: PSS-graphene oxide composite10.1109/JSEN.2020.2969667 ↗
55. Multi-modal strain and temperature sensor by hybridizing reduced graphene oxide and PEDOT:PSS10.1016/j.compscitech.2019.107959 ↗
56. One-dimensional ZnO nanostructures: solution growth and functional properties10.1007/s12274-011-0160-7 ↗
57. Effect of surfactant concentration variation on the thermoelectric properties of mesoporous ZnO10.1155/2013/172504 ↗
58. Organic thermoelectric devices with PEDOT:PSS/ZnO hybrid composites10.1016/j.cej.2021.128935 ↗
59. Dimensional effect of ZnO nanorods on gas-sensing performance10.1088/1361-6463/aadecb ↗
60. Different morphologies of ZnO nanorods and their sensing property10.1016/j.snb.2010.02.011 ↗
61. Importance of soft solution processing for advanced inorganic materials10.1557/JMR.1998.0101 ↗
62. Uniform particles of zinc oxide of different morphologies10.1016/0166-6622(90)80219-T ↗
63. Crystal growth of ZnO by hydrothermal decomposition of Zn‐EDTA10.1111/j.1151-2916.1984.tb19720.x ↗
64. Hydrothermal synthesis of zinc oxide powders with controllable morphology10.1016/S0272-8842(03)00069-5 ↗
65. Hydrothermal synthesis of zinc oxide nanoparticles using different chemical reaction stimulation methods and their influence on process kinetics10.3390/ma15217661 ↗
66. Electronic, chemical and structural change induced by organic solvents in tosylate-doped poly (3, 4-ethylenedioxythiophene)(PEDOT-OTs)10.1016/j.synthmet.2004.12.011 ↗
67. Structure and properties of solid-state synthesized poly (3′, 4′-ethylenedioxy-2, 2′: 5′, 2 ″-terthiophene)10.1016/j.synthmet.2009.10.033 ↗
68. A ZnO/PEDOT:PSS based inorganic/organic hetrojunction10.1016/j.ssc.2009.02.035 ↗
69. Preparation and characterizations of polyaniline (PANI)/ZnO nanocomposites film using solution casting method10.1016/j.tsf.2011.03.090 ↗
70. Mechanisms for doped PEDOT:PSS electrical conductivity improvement10.1039/D1MA00290B ↗
71. Vapour-phase polymerization of pyrrole and 3, 4-ethylenedioxythiophene using iron (III) 2, 4, 6-trimethylbenzenesulfonate10.1071/CH08347 ↗
72. In situ spectroelectrochemical Raman studies of poly (3, 4-ethylenedioxythiophene)(PEDT)10.1021/ma9905674 ↗
73. Vapor-phase polymerization of nanofibrillar poly (3, 4-ethylenedioxythiophene) for supercapacitors10.1021/nn405595r ↗
74. Significance of hydroxyl groups on the optical properties of ZnO nanoparticles combined with CNT and PEDOT:PSS10.3390/nano12193546 ↗
75. Incorporation of silver and gold nanostructures for performance improvement in P3HT: PCBM inverted solar cell with rGO/ZnO nanocomposite as an electron transport layer10.1016/j.orgel.2015.11.015 ↗
76. Physical and electrical performance of vapor–solid grown ZnO straight nanowires10.1007/s11671-008-9218-1 ↗
77. Vapor-phase polymerization of 3, 4-ethylenedioxythiophene: a route to highly conducting polymer surface layers10.1021/ma049864l ↗
78. A self-powered strain senor based on a ZnO/PEDOT:PSS hybrid structure10.1039/c3ra42778a ↗
79. Metallic behaviour of acid doped highly conductive polymers10.1039/C4SC02463J ↗
80. Electronic transport in the metallic state of oriented poly (p-phenylenevinylene)10.1103/PhysRevB.53.15529 ↗
81. Inkjet-printed graphene/PEDOT:PSS temperature sensors on a skin-conformable polyurethane substrate10.1038/srep35289 ↗
82. Fully printed flexible fingerprint-like three-axis tactile and slip force and temperature sensors for artificial skin10.1021/nn506293y ↗