journal article·2023-06-01Open access

The effect of conductive ink alternation on the sustainability and functioning of printed electronics

Mohammad Naji Nassajfar, Marja Välimäki, Liisa Hakola, Kim Eiroma, Kirsi Immonen, Mariam Abdulkareem, Mika Horttanainen

Abstract

Abstract The demand for printed electronics (PE) is expected to increase for improved functionality and autonomy of products in the context of the Internet of Things, especially for sensing and communication. With this trend, the environmental performance of novel technologies is of growing importance, and researchers are exploring ways to make them more environmentally friendly using bio-based substrates and additive printing methods. Conductive inks have the highest environmental impact in the life cycle of PE, and there are two options to decrease the impact: increase recycling rates or replace commonly used silver inks with less impactful materials such as copper or graphite. With the current mixed waste management system, a higher recycling rate for silver is not achievable. Copper and graphite have a lower environmental impact than silver, however, the electrical conductivity of copper and graphite inks is lower than silver ink. This article introduces a double-parameter comparison to simultaneously assess the environmental and electrical conductivity of PE using three inks of silver, copper, and graphite inks. Then based on the technical feasibility, this study proposes suitable applications for each substrate and ink combination.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Recycling and Waste Management Techniques · Advanced Sensor and Energy Harvesting Materials · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. The influence of printed electronics on the recyclability of paper: a case study for smart envelopes in courier and postal services10.1016/j.wasman.2015.01.005 ↗
2. Electronic waste reduction through devices and printed circuit boards designed for circularity10.1109/JFLEX.2022.3159258 ↗
3. Das · 2019
4. Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing10.1016/j.solmat.2011.09.048 ↗
5. EUROPEAN PARLIAMENT AND COUNCIL DIRECTIVE 94/62/EC of 20 December 1994 on packaging and packaging waste
6. Development of eco-efficient smart electronics for anticounterfeiting and shock detection based on printable inks10.1021/acssuschemeng.1c02348 ↗
7. Functional inks and indicators for Smart Tag based intelligent packaging applications
8. Biopolymer production and end of life comparisons using life cycle assessment10.1016/j.resconrec.2017.03.002 ↗
9. Multilayer plastic substrate for electronics10.1109/ESTC.2018.8546335 ↗
10. Potential of commercial wood-based materials as PCB substrate10.3390/ma15072679 ↗
11. Environmental Management–Life Cycle Assessment—Principles and Framework
12. Suitability of paper-based substrates for printed electronics10.3390/ma15030957 ↗
13. High-performance green flexible electronics based on biodegradable cellulose nanofibril paper10.1038/ncomms8170 ↗
14. End-of-life challenges of printed electronics10.1109/ISSST.2009.5156737 ↗
15. A new frontier of printed electronics: flexible hybrid electronics10.1002/adma.201905279 ↗
16. End-of-life impacts of pervasive computing10.1109/MTAS.2005.1407747 ↗
17. Lahme · 2020
18. Future paper based printed circuit boards for green electronics: fabrication and life cycle assessment10.1039/c4ee01995d ↗
19. Bio-based polymeric substrates for printed hybrid electronics10.3390/polym14091863 ↗
20. The effect of conductive ink layer thickness on the functioning of printed UHF RFID antennas10.1109/JPROC.2010.2050570 ↗
21. Alternative materials for printed circuit board production: an environmental perspective10.3390/su132112126 ↗
22. Environmental Management Systems10.4324/9781315071268-11 ↗
23. A strategy for material supply chain sustainability: enabling a circular economy in the electronics industry through green engineering10.1021/acssuschemeng.6b01954 ↗
24. Comparative life cycle assessment of silver nanoparticle synthesis routes10.1039/c5en00075k ↗
25. Influence of design properties of printed electronics on their environmental profile10.1051/mattech/2022016 ↗
26. Introduction to printed intelligence
27. Gold microneedles fabricated by casting of gold ink used for urea sensing10.1016/j.matlet.2019.02.014 ↗
28. Energy requirements and life cycle assessment of production and product integration of silver, copper and zinc nanoparticles10.1016/j.jclepro.2017.01.083 ↗
29. The need for design-for-recycling of paper-based printed electronics—a prospective comparison with printed circuit boards10.2139/ssrn.4208558 ↗
30. Suganuma · 201410.1007/978-1-4614-9625-0 ↗
31. Global environmental impacts of silver nanoparticle production methods supported by life cycle assessment10.1016/j.resconrec.2019.104676 ↗
32. Review of the end-of-life solutions in electronics-based smart textiles10.1080/00405000.2020.1825176 ↗
33. A review on printed electronics: fabrication methods, inks, substrates, applications and environmental impacts10.3390/jmmp5030089 ↗
34. Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices10.1039/c4tc01820f ↗
35. Copper inks for printed electronics: a review10.1039/d2nr03990g ↗