journal article·2023-06-01Open access

A machine learning framework for process optimization in aerosol jet 3D printing

Yujia Liu, Shuai Yin, Zhixin Liu, Haining Zhang

Abstract

Abstract As a burgeoning three-dimensional (3D) printing technology, aerosol jet printing (AJP) technique has the characteristics of direct writing and customizing microelectronic components with flexible substrates. Therefore, it has been widely applied to manufacture different electronic devices. Although AJP has unique advantages over traditional methods, the electrical performance of printed electronic devices is significantly reduced because of the inferior printing qualities, such as high overspray, low level of line thickness and high level of edge roughness. Therefore, producing lines with high-controllability and high-aspect ratio is urgent for AJP technology. In this research, a machine learning scheme is developed for process optimization in AJP. In the proposed scheme, a support vector machine is combined with Latin hyper sampling to determine an optimal operating window of AJP, producing conductive lines with better edge definition and reduced overspray. Then, based on the identified 3D operating window, the conflicting relationship between the deposited line width and thickness was revealed based on the developed Gaussian process regression models. Following that, via a non-dominated sorting genetic algorithm, the conflicting printed line morphology was further optimized under dual conflicting targets for maximizing line thickness and customizing line width, which helps to produce high-controllability and high-aspect ratio lines for AJP. The optimization results demonstrated the validity of the proposed approach, which is beneficial to the systemic optimization of the entire printing process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Infection Control and Ventilation · Fire Detection and Safety Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. A review: additive manufacturing for active electronic components10.1080/17452759.2016.1253181 ↗
2. Review of printed electrodes for flexible devices10.3389/fmats.2018.00077 ↗
3. A review of fabrication and applications of carbon nanotube film-based flexible electronics10.1039/C3NR33560G ↗
4. Direct printing of strain sensors via nanoparticle printer for the applications to composite structural health monitoring10.1016/j.procir.2017.03.279 ↗
5. Direct printing of highly sensitive, stretchable, and durable strain sensor based on silver nanoparticles/multi-walled carbon nanotubes composites10.1016/j.compositesb.2018.12.107 ↗
6. Flexible hybrid electronics: direct interfacing of soft and hard electronics for wearable health monitoring10.1002/adfm.201603763 ↗
7. Aerosol jet printed grid for ITO-free inverted organic solar cells10.1016/j.solmat.2012.06.042 ↗
8. Preparation of active layers in polymer solar cells by aerosol jet printing10.1021/am200907k ↗
9. Aerosol jet printed, Sub-2 V complementary circuits constructed from P- and N- type electrolyte gated transistors10.1002/adma.201401330 ↗
10. Aerosol jet printed P- and n-type electrolyte-gated transistors with a variety of electrode materials: exploring practical routes to printed electronics10.1021/am504171u ↗
11. Online monitoring of functional electrical properties in aerosol jet printing additive manufacturing process using shape-from-shading image analysis10.1115/1.4036660 ↗
12. Additive manufacturing technologies compared: morphology of deposits of silver ink using inkjet and aerosol jet printing10.1021/ie503636c ↗
13. Computational fluid dynamics modeling and online monitoring of aerosol jet printing process10.1115/1.4034591 ↗
14. Hybrid machine learning method to determine the optimal operating process window in aerosol jet 3D printing10.1021/acsami.9b02898 ↗
15. The effect of droplet sizes on overspray in aerosol-jet printing10.1002/adem.201701084 ↗
16. A computational study of high-speed microdroplet impact onto a smooth solid surface10.18869/acadpub.jafm.73.238.26440 ↗
17. Numerical and experimental investigation of aerosol jet printing10.1016/j.addma.2022.103090 ↗
18. Ensemble modeling of in situ features for printed electronics manufacturing with in situ process control potential10.1109/LRA.2017.2713242 ↗
19. Manufacturing quality prediction using smooth spatial variable selection estimator with applications in aerosol jet® printed electronics manufacturing10.1080/24725854.2019.1593556 ↗
20. Quality modeling of printed electronics in aerosol jet printing based on microscopic images10.1115/1.4035586 ↗
21. Process monitoring, modeling, and quality assessment for printed electronics with aerosol jet printing technology
22. A knowledge transfer framework to support rapid process modeling in aerosol jet printing10.1016/j.aei.2021.101264 ↗
23. Hybrid machine learning method to determine the optimal operating process window in aerosol jet 3D printing10.1021/acsami.9b02898 ↗
24. Response surface methodology using Gaussian processes: towards optimizing the trans-stilbene epoxidation over Co2+–NaX catalysts10.1016/j.cej.2009.11.002 ↗
25. Data clustering: 50 years beyond K-means10.1016/j.patrec.2009.09.011 ↗
26. A tutorial on support vector regression10.1023/B:STCO.0000035301.49549.88 ↗
27. Reliable multi-objective optimization of high-speed WEDM process based on Gaussian process regression10.1016/j.ijmachtools.2007.07.011 ↗
28. Genetic algorithms: a survey10.1109/2.294849 ↗
29. An evolutionary many-objective optimization algorithm using reference-point-based nondominated sorting approach, part i: solving problems with box constraints10.1109/TEVC.2013.2281535 ↗
30. Extracting spatial effects from machine learning model using local interpretation method: an example of SHAP and XGBoost10.1016/j.compenvurbsys.2022.101845 ↗