Wearable sensor for continuous skin temperature monitoring: from traditional materials and methods to next-generation textile sensors
Source abstract
Abstract
Abstract Wearable temperature sensors have emerged as a critical tool in modern healthcare, offering continuous, non-invasive monitoring of physiological parameters. This review presents a comprehensive analysis of fabric- and thread-based skin temperature sensors, focusing on their design principles, materials, fabrication, and biomedical applications. Skin-contact temperature monitoring is essential for detecting fever, managing chronic diseases, aiding post-operative care, and supporting high-risk populations such as neonates and the elderly. In contrast, wearable sensors, particularly those based on textiles, offer superior flexibility, comfort, and integration into daily life. The review categorizes wearable temperature sensors by three primary mechanisms: resistive temperature detectors, thermocouples, and thermistors. Each sensor type is evaluated based on sensitivity, response time, thermal conductivity, and power consumption. Thermoelectric materials, especially conductive polymers such as 3,4-polyethylenedioxythiophene-polystyrene sulfonic acid and polyaniline, and nanomaterials like silver nanowires and carbon nanotubes, are highlighted for their mechanical flexibility, tunable conductivity, and suitability for textile integration. The review also discusses composite materials that synergize the electrical conductivity of inorganic fillers with the stretchability and softness of polymers. Advanced fabrication methods, including spray coating, inkjet and extrusion printing, knitting, weaving, embroidery, and additive manufacturing, enable the integration of temperature sensors into yarns and fabrics without compromising performance or wearability. Techniques such as microencapsulation and yarn encapsulation are discussed for enhancing sensor durability against environmental factors like moisture and washing cycles. The paper further explores real-world biomedical applications, including patient monitoring, wound healing, and thermoregulation in neonatal and geriatric care. Emerging implantable and resorbable textile sensors are also discussed. Finally, key challenges, such as material stability, power management, biocompatibility, and regulatory hurdles, are addressed, outlining the pathway for future development of reliable and wearable thermal monitoring systems. This review aims to guide researchers and developers in advancing textile-integrated temperature sensors for next-generation healthcare solutions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Thermal Regulation in Medicine · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Fibra Inc
York University
Toronto Metropolitan University
References (100+)
Show source-provided references
1. Skin temperature: its role in thermoregulation10.1111/apha.12231 ↗
2. Wearable printed temperature sensors: short review on latest advances for biomedical applications10.1109/RBME.2021.3121480 ↗
3. Physiology, ovulation and basal body temperature
4. Role of fever in disease10.1111/j.1749-6632.1998.tb08329.x ↗
5. Normal body temperature: a systematic review10.1093/ofid/ofz032 ↗
6. Body temperature variability (Part 1): a review of the history of body temperature and its variability due to site selection, biological rhythms, fitness, and aging
7. Progress in the measurement of human body temperature10.1109/51.687959 ↗
8. Breathable and stretchable temperature sensors inspired by skin10.1038/srep11505 ↗
9. Bio‐multifunctional smart wearable sensors for medical devices10.1002/aisy.201900040 ↗
10. Flexible temperature sensors: a review10.1016/j.sna.2020.112282 ↗
11. Wearable sensors for remote health monitoring: potential applications for early diagnosis of Covid‐1910.1002/admt.202100545 ↗
12. Wearable and miniaturized sensor technologies for personalized and preventive medicine10.1002/adfm.201605271 ↗
13. An evaluation of body temperature measurement10.1177/0310057X8301100107 ↗
14. Tools that we use: if you can’t measure it, you can’t manage it10.1097/01.CCM.0000251297.60407.DB ↗
15. Textile-integrated thermocouples for temperature measurement10.3390/ma13030626 ↗
16. Materials and mechanics for stretchable electronics10.1126/science.1182383 ↗
17. Review of flexible temperature sensing networks for wearable physiological monitoring10.1002/adhm.201601371 ↗
18. Polymer temperature sensor for textronic applications10.1016/j.mseb.2009.07.014 ↗
19. Highly sensitive stretchable fiber-based temperature sensor enhanced by surface-chemically modified silver nanowires10.1016/j.cej.2024.148772 ↗
20. Design and development of textile-based wearable sensors for real-time biomedical monitoring; a review10.1080/00405000.2024.2318500 ↗
21. Flexible fiber-based multimodal perception system with integrated pressure, humidity, and temperature sensing for wearable application10.1016/j.cej.2025.159925 ↗
22. Ultra-linear, highly sensitive fabric strain/temperature sensor via the regulation of reduced graphene oxide defect and carrier migration for physiological risk alerts10.1016/j.cej.2025.165856 ↗
23. Multimodal wearable sensor sheet for health-related chemical and physical monitoring10.1021/acssensors.1c00281 ↗
24. Wearable multimodal sensor probe for monitoring core body temperature, electrocardiogram, heart rate, and sweat rate10.1109/ACCESS.2025.3561288 ↗
25. Enhanced sensitivity and stability of wearable temperature sensors: a novel approach using inkjet printing10.1039/D5LP00036J ↗
26. Intelligent thermochromic heating E-textile for personalized temperature control in healthcare10.1021/acsami.4c19174 ↗
27. A clinical investigation into the relationship between increased periwound skin temperature and local wound infection in patients with chronic leg ulcers10.1097/01.ASW.0000383197.28192.98 ↗
28. Biodegradable and highly deformable temperature sensors for the internet of things10.1002/adfm.201702390 ↗
29. Monitoring body temperature of newborn infants at neonatal intensive care units using wearable sensors
30. A flexible temperature sensor array with polyaniline/graphene–polyvinyl butyral thin film10.3390/s19194105 ↗
31. Large‐area all‐printed temperature sensing surfaces using novel composite thermistor materials10.1002/aelm.201800605 ↗
32. A flexible resistive temperature detector (RTD) based on in-situ growth of patterned Ag film on polyimide without lithography10.1016/j.mee.2019.111052 ↗
33. Inkjet-printed graphene/PEDOT: PSS temperature sensors on a skin-conformable polyurethane substrate10.1038/srep35289 ↗
34. Reliability of wearable technology to monitor core temperature among helicopter-based EMS crews10.1177/21650799241271139 ↗
35. Breathable, wearable skin analyzer for reliable long-term monitoring of skin barrier function and individual environmental health impacts10.1038/s41467-025-64207-2 ↗
36. Improvement of environmental robustness in non-invasive core body temperature sensor studied numerically and experimentally10.1016/j.sna.2024.115136 ↗
37. Smart wearable flexible temperature sensor with compensation against bending and stretching effects10.1016/j.sna.2023.114224 ↗
38. A printed MWCNTs/PDMS based flexible resistive temperature detector
39. Baker · 1998
40. Resistance temperature detectors fabricated via dual fused deposition modeling of polylactic acid and polylactic acid/carbon black composites10.3390/s21051560 ↗
41. Advanced thermal sensing techniques for characterizing the physical properties of skin10.1063/5.0095157 ↗
42. Current on-skin flexible sensors, materials, manufacturing approaches, and study trends for health monitoring: a review10.1021/acssensors.3c02555 ↗
43. Lead-wire-resistance compensation technique using a single zener diode for two-wire resistance temperature detectors (RTDs)10.3390/s20092742 ↗
44. Simplified 3-wire and 4-wire interface for resistive sensor measurement using microcontroller ADCs10.1109/TIM.2025.3578689 ↗
45. Fabrication of low-cost resistance temperature detectors and micro-heaters by electrohydrodynamic printing10.3390/mi13091419 ↗
46. Biopolymers-based microencapsulation technology for sustainable textiles development: a short review10.1016/j.cscee.2023.100349 ↗
47. Printed thick film resistance temperature detector for real-time tube furnace temperature monitoring10.3390/s24102999 ↗
48. Designing a wearable wrist body thermometer using resistance temperature detector with wireless data for non-contact measurement
49. A flexible differential temperature sensor for wearable electronics applications
50. Material, structural design, and post-processing strategies for strain-insensitive stretchable temperature sensors10.1186/s40486-025-00244-2 ↗
51. Intelligent transducer for temperature measurement with two-wire or three-wire platinum RTD10.3390/s24237689 ↗
52. PEDOT: PSS-based wearable flexible temperature sensor and integrated sensing matrix for human body monitoring10.1021/acsami.4c11251 ↗
53. Fabrication of cost effective flexible resistive temperature sensor based on poly (3, 4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT: PSS) via all printed technologies10.1007/s10854-025-14374-1 ↗
54. Smart temperature sensors and temperature sensor systems
55. Lee · 2022
56. Distributed embedded system for multiparametric assessment of infrastructure durability using electrochemical techniques10.3390/s24185882 ↗
57. Design of temperature measurement system guided by thermal dissipation coefficient of NTC thermistor10.1016/j.sna.2024.115772 ↗
58. Uncertainty of temperature measured by thermocouple10.37934/arfmts.68.1.5462 ↗
59. Dual-mode temperature monitoring using high-performance flexible thermocouple sensors based on PEDOT: PSS/CNTs and MXene/Bi2Se310.1038/s41378-025-00867-w ↗
60. Flexible thin film thermocouples: from structure, material, fabrication to application10.1016/j.isci.2023.107303 ↗
61. Inkjet printing wearable electronic devices10.1039/C7TC00038C ↗
62. First-principles thermodynamic theory of Seebeck coefficients10.1103/PhysRevB.98.224101 ↗
63. Recent advances in organic thermoelectric materials: principle mechanisms and emerging carbon-based green energy materials10.3390/polym11010167 ↗
64. Ioffe · 1958
65. Determining intracellular temperature at single-cell level by a novel thermocouple method10.1038/cr.2011.117 ↗
66. Neural probes with integrated temperature sensors for monitoring retina and brain implantation and stimulation10.1109/TNSRE.2016.2634584 ↗
67. LED optrode with integrated temperature sensing for optogenetics10.3390/mi9090473 ↗
68. Screen-printed paper-based thermocouples with carbon and silver single and multi-layers10.1088/2058-8585/ae19f5 ↗
69. Flexible thermocouple using a thermoelectric graphene fiber with a seamless junction10.1016/j.jmst.2023.05.078 ↗
70. Conformable, wearable embroidered temperature sensors for real-time monitoring in extreme environments10.3390/engproc2023052006 ↗
71. Record Seebeck coefficient and extremely low thermal conductivity in nanostructured SnSe10.1063/1.4913260 ↗
72. An anomalously high Seebeck coefficient and power factor in ultrathin Bi2Te3 film: spin–orbit interaction10.1063/5.0007440 ↗
73. A review on organic polymer-based thermoelectric materials10.1007/s10924-016-0895-z ↗
74. Polymer based thermoelectric nanocomposite materials and devices: fabrication and characteristics10.1016/j.nanoen.2020.105186 ↗
75. Fiber-based thermoelectric materials and devices for wearable electronics10.3390/mi12080869 ↗
76. E-textile technology review–from materials to application10.1109/ACCESS.2021.3094303 ↗
77. Conductive polymer composites with segregated structures10.1016/j.progpolymsci.2014.07.007 ↗
78. Organic thermoelectrics: materials preparation, performance optimization, and device integration10.1016/j.joule.2018.10.012 ↗
79. Polymer composites for thermoelectric applications10.1002/anie.201408431 ↗
80. Flexible temperature sensors based on carbon nanomaterials10.1039/D0TB02451A ↗
81. Algorithm execution time and accuracy of NTC thermistor-based temperature measurements in time-critical applications10.3390/math9182266 ↗
82. Recent advances in flexible temperature sensors: materials, mechanism, fabrication, and applications10.1002/advs.202405003 ↗
83. Advances in responsively conductive polymer composites and sensing applications10.1080/15583724.2020.1734818 ↗
84. Highly sensitive interdigitated thermistor based on PEDOT: PSS for human body temperature monitoring10.1088/2058-8585/acaabc ↗
85. Sensors for brain temperature measurement and monitoring–a review10.1016/j.neuri.2022.100106 ↗
86. A study of thermistor performance within a textile structure10.3390/s17081804 ↗
87. Flexible temperature sensors10.3389/fchem.2021.539678 ↗
88. Flexible liquid crystal thermistor and its application in temperature sensor10.1109/TED.2022.3204512 ↗
89. Precision human body temperature measurement based on thermistor sensor
90. Flexible fabric temperature sensor based on Vo2/Pedot: Pss with high performance10.1002/admt.202300898 ↗
91. Continuous core body temperature monitoring for heatstroke alert via a wearable in-ear thermometer10.1021/acssensors.4c03470 ↗
92. Rapid fabrication of graphene fibers and fiber-based thermistors for wearable devices10.1021/acsanm.4c04725 ↗
93. Detecting exercise-induced temperature distribution changes at the knee using a wearable array of thermistors10.1109/ACCESS.2025.3581491 ↗
94. A multifunctional skin-like wearable optical sensor based on an optical micro-/nanofibre10.1039/D0NR03446K ↗
95. Stretchable and temperature‐sensitive polymer optical fibers for wearable health monitoring10.1002/adfm.201902898 ↗
96. Smart textiles for multimodal wearable sensing using highly stretchable multiplexed optical fiber system10.1038/s41598-020-70880-8 ↗
97. Evaluation of newly developed wearable ear canal thermometer, mimicking the application to activities on sports and labor fields10.1186/s12576-023-00874-4 ↗
98. Systematic comparison of ear temperature probing positions for continuous wearable vital sign monitoring
99. Inductor-capacitor passive wireless sensors using nonlinear parity-time symmetric configurations10.1038/s41467-024-53655-x ↗
100. Capacitive-type wearable temperature sensors based on yttria-stabilized zirconia films fabricated via microwave-assisted all-solution-process and their application for detection of touch stimuli10.1016/j.jallcom.2024.178334 ↗