Origins of strain localization in a silver-based flexible ink under tensile load
Source abstract
Abstract
Abstract Flexible electronics often employ composite inks consisting of conductive flakes embedded in a polymer matrix to transmit electrical signal. Recently, localized necking was identified as a cause of a substantial increase in normalized resistance with applied strain thereby adversely impacting electrical performance. The current study explores two possible contributing factors for the formation of such localization—ink surface roughness and local variations in silver flake volume fraction. Uniaxial tension experiments of a DuPont 5025 type ink are used to inform a constitutive model implemented using finite element method on different substrates. Surface roughness was modeled by sinusoidal variation in ink height, whose amplitude and wavelength are informed by experimental laser profilometry scan data. Local flake fraction variations obtained from experimental measurements before applying any strain, were modeled as local variations in the elastic modulus according to an inverse rule of mixtures between the silver flake and acrylic binder material properties. The study identified that the ink height roughness is the most impactful contributor to the subsequent strain localization. The substrate elastic properties impact the number and magnitude of localization bands, with the stiffer substrate delocalizing strain and averting catastrophic crack formation seen with a more compliant substrate. The model incorporating surface roughness closely matches experimental measurements of local strain across different substrates. The study can inform designers of the adverse impact of ink surface roughness on localization and subsequent detrimental increase of the resistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Electronic Packaging and Soldering Technologies · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Low‐power flexible organic light‐emitting diode display device10.1002/adma.201101066 ↗
2. Paper-like electronic displays: large-area rubber-stamped plastic sheets of electronics and microencapsulated electrophoretic inks10.1073/pnas.091588098 ↗
3. Stretchable active-matrix organic light-emitting diode display using printable elastic conductors10.1038/nmat2459 ↗
4. Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis10.1038/nature16521 ↗
5. A wearable chemical–electrophysiological hybrid biosensing system for real-time health and fitness monitoring10.1038/ncomms11650 ↗
6. A graphene-based electrochemical device with thermoresponsive microneedles for diabetes monitoring and therapy10.1038/nnano.2016.38 ↗
7. Flexible polymer transistors with high pressure sensitivity for application in electronic skin and health monitoring10.1038/ncomms2832 ↗
8. Towards flexible solid-state supercapacitors for smart and wearable electronics10.1039/c7cs00505a ↗
9. Nanocarbon‐based materials for flexible all‐solid‐state supercapacitors10.1002/adma.201705489 ↗
10. Wearable and implantable devices for cardiovascular healthcare: from monitoring to therapy based on flexible and stretchable electronics10.1002/adfm.201808247 ↗
11. Materials for multifunctional balloon catheters with capabilities in cardiac electrophysiological mapping and ablation therapy10.1038/nmat2971 ↗
12. Mini review on flexible and wearable electronics for monitoring human health information10.1186/s11671-019-3084-x ↗
13. Review on flexible photonics/electronics integrated devices and fabrication strategy10.1007/s11432-018-9442-3 ↗
14. The role of strain localization on the electrical behavior of flexible and stretchable screen printed silver inks on polymer substrates10.1016/j.mtla.2020.100642 ↗
15. The characterization of electrically conductive silver ink patterns on flexible substrates10.1016/j.microrel.2009.04.004 ↗
16. Performance characterization of screen printed radio frequency identification antennas with silver nanopaste10.1016/j.tsf.2009.05.019 ↗
17. Scaling and optimization of gravure-printed silver nanoparticle lines for printed electronics10.1109/TCAPT.2009.2021464 ↗
18. Effect of printing parameters on gravure patterning with conductive silver ink10.1088/0960-1317/25/4/045004 ↗
19. Mechanical behavior of strain sensors based on PEDOT:PSS and silver nanoparticles inks deposited on polymer substrate by inkjet printing10.1016/j.sna.2016.03.021 ↗
20. Inkjet printing of narrow conductive tracks on untreated polymeric substrates10.1002/adma.200701876 ↗
21. One-pot synthesis of a stable and cost-effective silver particle-free ink for inkjet-printed flexible electronics10.1039/D0TC03864D ↗
22. Surface energy patterning for ink-independent process optimization of inkjet-printed electronics10.1088/2058-8585/abcc79 ↗
23. Understanding effects of printhead geometry in aerosol jet printing10.1088/2058-8585/aba2bb ↗
24. Analysis of electrically conductive silver ink on stretchable substrates under tensile load10.1016/j.microrel.2010.06.011 ↗
25. Self-reducing silver ink on polyurethane elastomers for the manufacture of thin and highly stretchable electrical circuits10.1021/acs.chemmater.0c04025 ↗
26. Correlations between mechanical stress, electrical conductivity and nanostructure in Al films on a polymer substrate10.1016/j.matchar.2009.12.016 ↗
27. Deformation behavior of thin copper films on deformable substrates10.1016/S1359-6454(01)00293-2 ↗
28. Stretchable gold conductors on elastomeric substrates10.1063/1.1565683 ↗
29. Metal films on polymer substrates stretched beyond 50%10.1063/1.2817234 ↗
30. Failure by simultaneous grain growth, strain localization, and interface debonding in metal films on polymer substrates10.1557/JMR.2009.0048 ↗
31. Thickness dependent critical strain in submicron Cu films adherent to polymer substrate10.1063/1.2722684 ↗
32. High ductility of a metal film adherent on a polymer substrate10.1063/1.2108110 ↗
33. The yield strength of thin copper films on Kapton10.1063/1.1644634 ↗
34. X-ray diffraction as a tool to study the mechanical behaviour of thin films10.1016/S0921-5093(00)00876-5 ↗
35. Improved electro-mechanical reliability of flexible systems with alloyed Mo-Ta adhesion layers10.1016/j.tsf.2021.138533 ↗
36. The electro-mechanical behavior of sputter-deposited Mo thin films on flexible substrates10.1016/j.tsf.2016.03.032 ↗
37. Measuring electro-mechanical properties of thin films on polymer substrates10.1016/j.mee.2014.08.002 ↗
38. Stretchability of thin metal films on elastomer substrates10.1063/1.1806275 ↗
39. Delocalizing strain in a thin metal film on a polymer substrate10.1016/j.mechmat.2004.02.002 ↗
40. Ductility of thin metal films on polymer substrates modulated by interfacial adhesion10.1016/j.ijsolstr.2006.07.022 ↗
41. Ncorr: open-source 2D digital image correlation Matlab software10.1007/s11340-015-0009-1 ↗
42. Pure Metals Properties: A Scientific and Technical Handbook10.3109/13697139909038084 ↗
43. Temperature-dependent mechanical behaviour of PMMA: experimental analysis and modelling10.1016/j.polymertesting.2016.12.016 ↗
44. The growth and stress vs. strain characterization of the silver solid solution phase with indium10.1016/j.jallcom.2015.11.212 ↗
45. A plane periodic boundary-value problem of elasticity theory for a half-plane with curvilinear edge10.1007/s11003-009-9120-8 ↗
46. Instability of a layer on a half space
47. Mixed mode cracking in layered materials10.1016/S0065-2156(08)70164-9 ↗
48. Bimaterial interface instabilities in plastic solids10.1016/0020-7683(86)90007-7 ↗
49. Localized necking in thin sheets10.1016/0022-5096(75)90004-6 ↗