Electromechanical characterization of flexible screen-printed tracks
Source abstract
Abstract
Abstract To reduce the environmental impact of flexible printed electronics the most used material combination—silver-based ink on a plastic substrate—needs to be replaced. Carbon-based inks and paper substrates have the potential to do this, but their electromechanical reliability needs to be evaluated. This paper presents a systematic study of cyclic bending reliability for carbon-based inks on plastic substrates and silver-based inks on plastic and paper substrates, using a 9 mm compressive bending radius. Failure was defined as a 70% increase in resistance from the initial value, and carbon-based inks showed promising results as their resistance did not reach the failure criteria even after 30 000 bent cycles. Silver-based inks on plastic substrates failed by around 200 cycles as evaluated by the Weibull’s cumulative distribution function, but silver on a regenerated cellulose film lasted almost 30 000 cycles. However, for paper substrates, bending reliability showed significant variation. Therefore, silver-based inks on both substrate types were subjected to further characterization to study potential correlations among substrate surface roughness, substrate thickness, and substrate type. For paper substrates, a strong correlation was observed between surface roughness and the number of cycles to failure. Sustainable packing material failed around 40 cycles, likely due to the uneven distribution of silver, which contributed to failures. Smooth regenerated cellulose film on the other hand lasted almost 30 000 cycles. With plastic substrates no strong correlation was found as even the smoothest substrates failed relatively quickly. This study also demonstrates that low overall thickness of the substrate enhances bending reliability, especially with paper substrates, as the strain is decreased. Overall carbon-based inks and paper substrates show promising results in replacing the mainstream materials, but the lower conductivity of carbon compared to silver, and the effect of surface roughness on the reliability of paper substrates needs to be considered.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Flexible electronics: the next ubiquitous platform10.1109/JPROC.2012.2190168 ↗
2. “Advances in flexible and printed electronics: materials, fabrication, and applications”
3. Introduction to printed electronics10.1007/978-1-4614-9625-0 ↗
4. “Nanotechnology in electronics: materials, properties, devices”
5. “Paper electronics”10.1002/adma.201004692 ↗
6. Cellulose and nanocellulose-based flexible-hybrid printed electronics and conductive composites—a review10.1016/j.carbpol.2018.06.045 ↗
7. Conductive nanomaterials for printed electronics10.1002/smll.201303000 ↗
8. “The effect of conductive ink alternation on the sustainability and functioning of printed electronics10.1088/2058-8585/acd650 ↗
9. Mechanical durability of screen-printed flexible silver traces for wearable devices10.1016/j.sbsr.2022.100537 ↗
10. Cyclic bending effects on resistance of screen-printed silver conductors10.1109/TCPMT.2021.3108491 ↗
11. The effect of width and thickness on cyclic bending reliability of screen-printed silver traces on a plastic substrate10.1109/TCPMT.2016.2544441 ↗
12. Cyclic bending reliability of silk screen printed silver traces on plastic and paper substrates10.1109/TDMR.2015.2457231 ↗
13. Reliability of screen-printed conductors and resistors during fatigue cycling on flexible substrate10.4071/2380-4505-2019.1.000139 ↗
14. Ekra X5 professional stencil printer
15. Dynamic bending test analysis of inkjet-printed conductors on flexible substrates10.1109/ECTC.2012.6248810 ↗
16. Datasheet
17. Goswami · 1996
18. Chapter 4—the mathematics of failure and reliability10.1016/B978-012524985-0/50005-2 ↗
19. Fully screen printed highly conductive electrodes on various flexible substrates for asymmetric supercapacitors10.1039/C5RA16724H ↗
20. Evaluation of carbon based interconnects for digital signalling in printed flexible electronics on sustainable substrates10.1109/JFLEX.2025.3562530 ↗
21. A study of Weibull shape parameter: properties and significance10.1016/j.ress.2011.09.003 ↗
22. Datasheet
23. Whitehouse · 2004
24. Roughness parameters10.1016/S0924-0136(02)00060-2 ↗
25. Use of nanocellulose in printed electronics: a review10.1039/C6NR03054H ↗
26. Suitability of paper-based substrates for printed electronics10.3390/ma15030957 ↗
27. An investigation of methods to enhance adhesion of conductive layer and dielectric substrate for additive manufacturing of electronics10.1038/s41598-024-61327-5 ↗
28. The role of strain localization on the electrical behavior of flexible and stretchable screen printed silver inks on polymer substrates10.1016/j.mtla.2020.100642 ↗