Microstrip resonators on polyethylene terephthalate substrates realized by direct-write technology
Source abstract
Abstract
Abstract Printed Electronics (PE) technology has obtained considerable attention due to the simplification of the manufacturing process that can be fully additive. In addition, PE offers possibility to use low-cost, low-temperature substrates, such as polyethylene terephthalate (PET) foil, which could serve as an alternative to conventional high-frequency substrates, like Rogers. In this study, digital printing technology direct write, or so-called dispensing is used to print microstrip Rectangular-shaped resonators (RSRs) on a flexible PET foil and a semi-flexible Rogers 4003 substrate. Resonators are printed by a contact dispenser Nordson EFD Pro Plus 4L/A from a conductive silver-based DuPont PE 874 paste. The selected straight and bent RSRs have deep resonance frequencies at 2.50, and 1.90 GHz, with an amplitude of about −50 and −60 dB, respectively. The mentioned resonators are simulated and printed; then the results are compared with a good match. Resonators on Rogers shows a good match between simulation and realization. On a PET substrate, a 6% shift of transmission zero location is observed. To better understand some probable challenges during the manufacturing of high-frequency resonators, the structure of printed layers is characterized, and the manufacturing process itself is completely analyzed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Acoustic Wave Resonator Technologies · Advanced Sensor and Energy Harvesting Materials · Advanced MEMS and NEMS Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Cui · 2016
2. A review on printed electronics: fabrication methods, inks, substrates, applications and environmental impacts10.3390/jmmp5030089 ↗
3. Printed electronics: key trends
4. Chemistry of solid metal-based inks and pastes for printed electronics—A review10.1016/j.apmt.2019.02.012 ↗
5. A review on materials and technologies for organic large-area electronics10.1002/admt.202001016 ↗
6. Reviews on micro- and nanolithography techniques and their applications10.4186/ej.2012.16.1.37 ↗
7. Printed flexible wideband microstrip antenna for wireless applications10.1109/ATC.2016.7764811 ↗
8. Ink-jet printed ring resonator with integrated Microfluidic components10.1108/CW-11-2019-0176 ↗
9. Low-cost direct-writing of silver-based ink for planar microwave circuits up to 10 GHz10.1109/ACCESS.2023.3234772 ↗
10. Multi-GHz microstrip transmission lines realised by screen printing on flexible substrates10.1109/EDAPS.2017.8277038 ↗
11. Performance comparison of silver ink and copper conductors for microwave applications10.1049/iet-map.2009.0241 ↗
12. Flexible inkjet-printed graphene antenna on Kapton10.1088/2058-8585/ac0ac1 ↗
13. Low-cost thin film patch antennas and antenna arrays with various background wall materials for indoor wireless communications10.1088/2058-8585/accd05 ↗
14. UHF-RFID enabled wearable flexible printed sensor with antenna performance10.1016/j.aeue.2022.154410 ↗
15. A miniaturized dual-band bandpass filter with sharp roll-off rate using coupled lines and dual transmission lines10.1016/j.aeue.2022.154367 ↗
16. Aerosol jet printed, microwave microstrip ring resonators for system-in-package applications10.1109/TCPMT.2020.3025186 ↗
17. Silver-nanoparticle-based screen-printing and film characterization of a disposable, dual-band, bandstop filter on a flexible polyethylene terephthalate substrate10.1155/2015/810150 ↗
18. Hong · 2011 · vol 7
19. Design of microstrip lowpass filter with ultra-wide stopband and sharp rejection
20. A neuro-based approach to designing a Wilkinson power divider10.1002/mmce.22091 ↗
21. A compact simple microstrip lowpass filter based on elliptical analyzed resonator10.1515/freq-2021-0157 ↗
22. Fully flexible polymer-based microwave devices: materials, fabrication technique, and application to transmission lines10.1109/TAP.2021.3083855 ↗
23. Study of flexible printed transmission lines realized by direct-write printing technology10.1109/ISSE57496.2023.10168512 ↗