journal article·2024Open access

Nanocellulose-Phenol Formaldehyde Adhesive System for Engineered Wood Products: Review

Zahra Naghizadeh, Maria C. Iglesias, Fatimatu Bello, Armando G. McDonald, Brian K. Via, Michael R. Maughan, Maria S. Peresin

Forest Products Journal· Volume 74· Issue S1

Abstract

Abstract Incorporating cellulose nanomaterials into wood adhesives has recently been considered for improving sustainability within wood composite panels. The role of nanocellulose in such an application is mainly determined by nanocellulose dimension, form, morphological and physicochemical properties, characteristics of an adhesive system, and chemical interaction of nanocellulose and adhesive, as well as the dispersion and the orientation of nanomaterials in the polymeric matrix of adhesive. Phenol formaldehyde (PF) adhesives have been extensively used in engineered wood products for decades, and concerns about their brittleness led to continued research efforts for modifying the resin. Recently, the developments in the bio-economy and the nanocellulose industry provided new possibilities for PF adhesive modification and its structural reinforcement with a renewable, biodegradable, abundant, and mechanically strengthened resource. This paper aims to review and demonstrate the available research on the development of nanocellulose-reinforced PF as an adhesive matrix for engineered wood products, in particular, plywood, particleboard, and oriented strand board.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Lignin and Wood Chemistry · Wood Treatment and Properties · Advanced Cellulose Research Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (97)

Show source-provided references
1. Achary, P. S. and RamaswamyR. 1998. Reactive compatibilization of a nitrile rubber/phenolic resin blend: Effect on adhesive and composite properties. J. Appl. Polym. Sci. 69(6):1187–1201.
2. Alawode, A. O., Bungu P. E., Amiandamhen S. O., Meincken M., and TyhodaL. 2019. Properties and characteristics of novel formaldehyde-free wood adhesives prepared from Irvingia gabonensis and Irvingia wombolu seed kernel extracts. Int. J. Adhes. Adhes. 95:102423.
3. Alawode, A. O., Eselem-Bungu P. S., Amiandamhen S. O., Meincken M., and TyhodaL. 2020. Evaluation of Irvingia kernels extract as biobased wood adhesive. J. Wood Sci. 66:1–13.
4. Barbu, M. C., Reh R., and IrleM. 2014. Wood-based composites. In: Research Developments in Wood Engineering and Technology. AguileraA. and DavimJ. P. (Eds.) IGI Global, Hershey, Pennsylvania. pp. 1–45.
5. Bekhta, P., and MarutzkyR. 2007. Reduction of glue consumption in the plywood production by using previously compressed veneer. Holz als Roh-und Werkstoff. 65(1):87–88.
6. Bekhta, P., Ortynska G., and SedliacikJ. 2014. Properties of modified phenol-formaldehyde adhesive for plywood panels manufactured from high moisture content veneer. Drvna Industrija65(4):293–301.
7. Bekhta, P., Sedliačik J., and BekhtaN. 2020. Effects of selected parameters on the bonding quality and temperature evolution inside plywood during pressing. Polymers12(5):1035.
8. Bello, F. and ChimphangoA. 2022. Non-catalyzed formic acid based process for preparing thermally stable spherical cellulose nanocrystals from mango seed husk. Biomass Conversion Biorefinery14: 1133–1148. https://doi.org/10.1007/s13399-022-03245-y
9. Benhamou, A. A., Boussetta A., Kassab Z., Nadifiyine M., Salim M. H., Grimi N., Achaby M.E., and MoubarikA. 2021. Investigating the characteristics of cactus seeds by-product and their use as a new filler in phenol formaldehyde wood adhesive. Int. J. Adhes. Adhes. 110:102940.
10. Chen, H., Gnanasekar P., Nair S. S., Xu W., Chauhan P., and YanN. 2020. Lignin as a key component in lignin-containing cellulose nanofibrils for enhancing the performance of polymeric diphenylmethane diisocyanate wood adhesives. ACS Sustain. Chem. Eng. 8(46):17165–17176.
11. Cao, L., Zhou X., and DuG. 2020. Wood adhesive fillers used during the manufacture of wood panel products. HuicocheaE.F (ed.) In: Fillers. IntechOpen. London, United Kingdom. pp. 1–9.
12. Chinese standard, GB/T 2794 (1995) . Determination Methods For Viscosity Of Adhesives.
13. Cui, J., Lu X., Zhou X., Chrusciel L., Deng Y., Zhou H., … and BrosseN. 2015. Enhancement of mechanical strength of particleboard using environmentally friendly pine (Pinus pinaster L.) tannin adhesives with cellulose nanofibers. Ann. Forest Sci. 72:27–32.
14. Dalmas, F., Chazeau L., Gauthier C., Cavaillé J. Y., and DendievelR. 2006. Large deformation mechanical behavior of flexible nanofiber filled polymer nanocomposites. Polymer47(8):2802–2812.
15. de Souza Lima, M. M. and BorsaliR. 2004. Rodlike cellulose microcrystals: Structure, properties, and applications. Macromol. Rapid Comm. 25(7):771–787.
16. Divekar, N. 2016. Introduction to new material—Cross laminated timber. Int. J. Eng. Res. 5(3):675–679.
17. Dufresne, A. 2012. Potential of nanocellulose as a reinforcing phase for polymers. J. Sci. Technol. Forest Prod. Process. 2(6):6–16.
18. Dugmore, M., Nocetti M., Brunetti M., Naghizadeh Z., and WesselsC. B. 2019. Bonding quality of cross-laminated timber: Evaluation of test methods on Eucalyptus grandis panels. Construct. Build. Mater. 211:217–227.
19. Dunky, M., Pizzi T., and LeemputM. V. 2002. Wood adhesion and glued products. Report on the state of the art. COST Action E13 - WG 2. COST Association (European Cooperation in Science and Technology), Brussels, Belgium.
20. Eichhorn, S. J., Dufresne A., Aranguren M., Marcovich N. E., Capadona J. R., Rowan S. J., Weder C., Thielemans W., Roman M., Renneckar S., Gindl W., Veigel S., Keckes J., Yano H., Abe K., Nogi M., Nakagaito A. N., Mangalam A., Simonsen J., Benight A. S., Bismarck A., Berglund L. A., and PeijsT. 2010. Current international research into cellulose nanofibres and nanocomposites. J. Mater. Sci. 45:1–33.
21. Ekman, K. H. 1965. Formaldehyde obtained by alkaline hydrolysis of wood and lignin. TAPPI. 48(7): 398–402.
22. Faria, L. U. S., Pacheco B. J. S., Oliveira G. C., and SilvaJ. L. 2020. Production of cellulose nanocrystals from pineapple crown fibers through alkaline pretreatment and acid hydrolysis under different conditions. J. Mater. Res. Technol. 9(6):12346–12353.
23. Frihart, C. R. 2005. Adhesive bonding and performance testing of bonded wood products. Journal of ASTM International. 2(7). https://doi.org/10.1520/JAI12952.
24. Fu, J., Wang S., He C., Lu Z., Huang J., and ChenZ. 2016. Facilitated fabrication of high strength silica aerogels using cellulose nanofibrils as scaffold. Carbohydr. Polym. 147:89–96.
25. Gindl, W., Schöberl T., and JeronimidisG. 2004. The interphase in phenol–formaldehyde and polymeric methylene di-phenyl-di-isocyanate glue lines in wood. Int. J. Adhes. Adhes. 24(4):279–286.
26. Habibi, Y., Lucia L. A., and RojasO. J. 2010. Cellulose nanocrystals: Chemistry, self-assembly, and applications. Chem. Rev. 110(6):3479–3500.
27. He, G. and RiedlB. 2004. Curing kinetics of phenol formaldehyde resin and wood-resin interactions in the presence of wood substrates. Wood Sci. Technol. 38:69–81.
28. Hemmilä, V., Adamopoulos S., Karlsson O., and KumarA. 2017. Development of sustainable bio-adhesives for engineered wood panels—A review. RSC Adv. 7(61):38604–38630.
29. Hong, J. K. 2009. Effect of cellulose nanocrystals on the rheology, curing behavior, and fracture performance of phenol-formaldehyde resol resin. Doctoral dissertation. Virginia Tech, Blacksburg.
30. Hong, M. K. and ParkB. D. 2017. Effect of urea-formaldehyde resin adhesive viscosity on plywood adhesion.J. Korean Wood Sci. Technol. 45(2):223–231.
31. Hornus, M., Via B. K., Gallagher T., and PeresinM. S. 2021. Partial substitution of pMDI with lignin containing cellulose nanofibrils: Low density oriented strand board. Wood Mater. Sci. Eng. 16(6):391–396.
32. Hunt, C. G., Jakes J. E., and GrigsbyW. 2010. Evaluation of adhesive penetration of wood fibre by nanoindentation and microscopy. In: BIOCOMP 2010: 10th Pacific Rim Bio-based Composites Symposium. Banff, Alberta, Canada on October 5-8, 2010. pp. 216–226.
33. Jakes, J. E., Hunt C. G., Yelle D. J., Lorenz L., Hirth K., Gleber S. C., … and FrihartC. R. 2015. Synchrotron-based x-ray fluorescence microscopy in conjunction with nanoindentation to study molecular-scale interactions of phenol–formaldehyde in wood cell walls. ACS Appl. Mater. Interface. 7(12):6584–6589.
34. Joseph, S. 2006. PhD thesis. Banana fibre: A potential reinforcement in Phenol Formaldehyde resin. Mahatma Gandhi University, Kottayam, Kerala, India.
35. Joseph, S., Sreekala M. S., Oommen Z., Koshy P., and ThomasS. 2002. A comparison of the mechanical properties of phenol formaldehyde composites reinforced with banana fibres and glass fibres. Compos. Sci. Technol. 62(14):1857–1868.
36. Kawalerczyk, J., Dziurka D., and MirskiR. 2020a. The possible reduction of phenol-formaldehyde resin spread rate by its nanocellulose-reinforcement in plywood manufacturing process. Ann. Warsaw Univ. Life Sci. SGGW Forestry Wood Technol. 111:21–26.
37. Kawalerczyk, J., Dziurka D., Mirski R., and SiudaJ. 2021a. The reduction of adhesive application in plywood manufacturing by using nanocellulose‐reinforced urea‐formaldehyde resin. J. Appl. Polym. Sci. 138(7):49834.
38. Kawalerczyk, J., Dziurka D., Mirski R., Siuda J., and BabickaM. 2021b. Possibility of use of NCC-reinforced melamine-urea-formaldehyde adhesive in plywood manufacturing. Drvna Industrija72(3): 279–289.
39. Kawalerczyk, J., Dziurka D., Mirski R., and SzentnerK. 2020b. Properties of plywood produced with urea-formaldehyde adhesive modified with nanocellulose and microcellulose. Drvna Industrija71(1):61–67.
40. Kawalerczyk, J., Dziurka D., Mirski R., Siuda J., and SzentnerK. 2020c. The effect of nanocellulose addition to phenol-formaldehyde adhesive in water-resistant plywood manufacturing. BioResources. 15(3):5388–5401.
41. Kawalerczyk, J., Dziurka D., and PolandR. M. 2022a. The effect of a phenol formaldehyde adhesive reinforcement with nanocellulose on the pressing parameters of plywood. Wood Res. 67(5):796–808.
42. Kawalerczyk, J., Walkiewicz J., Dziurka D., Mirski R., and BrózdowskiJ. 2022b. APTES-modified nanocellulose as the formaldehyde scavenger for UF adhesive-bonded particleboard and strawboard. Polymers14(22):5037.
43. Kim, J. H., Shim B. S., Kim H. S., Lee Y. J., Min S. K., Jang D., … and KimJ. 2015. Review of nanocellulose for sustainable future materials. Int. J. Precis. Eng. Manuf. Green Technol. 2:197–213.
44. Klemm, D., Heublein B., Fink H., and BohnA. 2005. Fascinating biopolymer and sustainable raw material angewandte. Polym. Sci. Cell. 44:3358–3393.
45. Kojima, Y., Kato N., Ota K., Kobori H., Suzuki S., Aoki K., and ItoH. 2018. Cellulose nanofiber as complete natural binder for particleboard. Forest Prod.J. 68(3):203–210.
46. Konnerth, J., Gindl W., Harm M., and MüllerU. 2006a. Comparing dry bond strength of spruce and beech wood glued with different adhesives by means of scarf-and lap joint testing method. Eur. J. Wood Wood Prod. 64(4):269–271.
47. Konnerth, J., Gindl W., and MüllerU. 2007. Elastic properties of adhesive polymers. I. Polymer films by means of electronic speckle pattern interferometry. J. Appl. Polym. Sci. 103(6):3936–3939.
48. Konnerth, J., Jäger A., Eberhardsteiner J., Müller U., and GindlW. 2006b. Elastic properties of adhesive polymers. II. Polymer films and bond lines by means of nanoindentation. J. Appl. Polym. Sci. 102(2):1234–1239.
49. Kurt, R. and CilM. 2012. Effects of press pressures on glue line thickness and properties of laminated veneer lumber glued with phenol formaldehyde adhesive. BioResources7(4):5346–5354.
50. Kurt, R., Meriç H., Aslan K., and ÇilM. 2012. Laminated veneer lumber (LVL) manufacturing using three hybrid poplar clones. Turk. J. Agric. Forestry36(2):237–245.
51. Lahiji, R. R., Reifenberger R., Raman A., Rudie A., and MoonR. J. 2008. Characterization of cellulose nanocrystal surfaces by SPM. In: Technical Proceedings of the 2008 NSTI Nanotechnology Conference and Trade Show. June 1-5, Boston, Massachusetts, USA. Boca Raton, FL: CRC Press. 2: 704-707.
52. Lahiji, R. R., Xu X., Reifenberger R., Raman A., Rudie A., and MoonR. J. 2010. Atomic force microscopy characterization of cellulose nanocrystals. Langmuir26(6):4480–4488.
53. Lengowski, E. C., Bonfatti E. A. Jr., Dallo R., Nisgoski S., Mattos J. L. M. D., and PrataJ. G. 2021. Nanocellulose-reinforced phenol-formaldehyde resin for plywood panel production. Maderas. Ciencia Tecnología23. http://dx.doi.org/10.4067/s0718-221x2021000100405.
54. Li, F., Ye C., Huang Y., Liu X., and FeiB. 2021. Incorporation of in situ synthesized nano-copper modified phenol-formaldehyde resin to improve the mechanical properties of Chinese fir: A preliminary study. Polymers13(6):876.
55. Liang, K., Du G. B., Hosseinaei O., Wang S. Q., and WangH. 2011. Mechanical properties of secondary wall and compound corner middle lamella near the phenol-formaldehyde (PF) adhesive bond line measured by nanoindentation. Adv. Mater. Res. 236:1746–1751.
56. Liu, C., Cheng Z., Wang S., Zhang Y., and HosseinaeiO. 2018. Effects of nanocrystalline cellulose on the micro-creep properties of phenol formaldehyde resin. Mater. Res. Expr. 5(12):125019.
57. Liu, C., Zhang Y., Wang S., Meng Y., and HosseinaeiO. 2014. Micromechanical properties of the interphase in cellulose nanofiber-reinforced phenol formaldehyde bondlines. BioResources9(3):5529–5541.
58. Liu, Z., Zhang Y., Wang X., and RodrigueD. 2015. Reinforcement of lignin-based phenol-formaldehyde adhesive with nano-crystalline cellulose (NCC): Curing behavior and bonding property of plywood. Mater. Sci. Appl. 6(06):567.
59. Mesquita, R. G. D. A., Mendes L. M., Sanadi A. R., de Sena Neto A. R., Claro P. I. C., Corrêa A. C., and MarconciniJ. M. 2018. Urea formaldehyde and cellulose nanocrystals adhesive: studies applied to sugarcane bagasse particleboards. J. Polym. Environ. 26:3040–3050.
60. Mirski, R., Dziurka D., and ŁęckaJ. 2011. Potential of shortening pressing time or reducing pressing temperature for plywood resinated with PF resin modified using alcohols and esters. Eur. J. Wood Wood Prod. 69(2):317–323.
61. Moslemi, A., Behzad T., and PizziA. 2020. Addition of cellulose nanofibers extracted from rice straw to urea formaldehyde resin; effect on the adhesive characteristics and medium density fiberboard properties. Int. J. Adhes. Adhes. 99:102582.
62. Moubarik, A., Pizzi A., Allal A., Charrier F., and CharrierB. 2009. Cornstarch and tannin in phenol–formaldehyde resins for plywood production. Ind. Crops Prod. 30(2):188–193.
63. Musah, M., Wang X., Dickinson Y., Ross R. J., Rudnicki M., and XieX. 2021. Durability of the adhesive bond in cross-laminated northern hardwoods and softwoods. Construct. Build. Mater. 307:124267.
64. Najafi, S. K. and DoosthoseiniK. 2000. The use of gall flour as the filler of phenol-formaldehyde resin in plywood manufacturing. Iran. J. Nat. Res. 53(2):155–164.
65. Nechyporchuk, O., Belgacem M. N., and BrasJ. 2016. Production of cellulose nanofibrils: A review of recent advances. Ind. Crops Prod. 93:2–25.
66. Neelamana, I. K., Thomas S., and ParameswaranpillaiJ. 2013. Characteristics of banana fibers and banana fiber reinforced phenol formaldehyde composites—Macroscale to nanoscale. J. Appl. Polym. Sci. 130(2):1239–1246.
67. Noorani, S., Simonsen J., and AtreS. 2007. Nano-enabled microtechnology: Polysulfone nanocomposites incorporating cellulose nanocrystals. Cellulose14:577–584.
68. Orts, W. J., Godbout L., Marchessault R. H., and RevolJ. F. 1995. Shear-induced alignment of liquid-cystalline suspensions of cellulose microfibrils. Flow-Induced Structure in Polymers-Chapter 23. pp 335–348. http://dx.doi.org/10.1021/bk-1995-0597.ch023.
69. Orts, W. J., Godbout L., Marchessault R. H., and RevolJ. F. 1998. Enhanced ordering of liquid crystalline suspensions of cellulose microfibrils: A small angle neutron scattering study. Macromolecules31(17):5717–5725.
70. Orts, W. J., Shey J., Imam S. H., Glenn G. M., Guttman M. E., and RevolJ. F. 2005. Application of cellulose microfibrils in polymer nanocomposites. J. Polym. Environ. 13:301–306.
71. Petersson, L., Kvien I., and OksmanK. 2007. Structure and thermal properties of poly (lactic acid)/cellulose whiskers nanocomposite materials. Compos. Sci. Technol. 67(11–12):2535–2544.
72. Pinkl, S., Veigel S., Gindl-Altmutter W., van Herwijnen H., and RieglerM. 2022. Effects of fibrillar cellulosic additives on particleboard production and properties. Wood Mater. Sci. Eng. 17(2):106–112.
73. Pizzi, A. and EatonN. J. 1987. A conformational analysis approach to phenol-formaldehyde resins adhesion to wood cellulose. J. Adhes. Sci. Technol. 1(1):191–200.
74. Pizzi, A., Mtsweni B., and ParsonsW. 1994. Wood‐induced catalytic activation of PF adhesives autopolymerization vs. PF/wood covalent bonding. J. Appl. Polym. Sci. 52(13):1847–1856.
75. Poljansek, I. and KrajncM. 2005. Characterization of phenol-formaldehyde prepolymer resins by in line FT-IR spectroscopy. Acta Chimica Slovenica52(3):238.
76. Pröller, M., Nocetti M., Brunetti M., Barbu M. C., Blumentritt M., and WesselsC. B. 2018. Influence of processing parameters and wood properties on the edge gluing of green Eucalyptus grandis with a one-component PUR adhesive. Eur. J. Wood Wood Prod. 76:1195–1204.
77. Azizi Samir, M. A., Alloin F., Paillet M., and DufresneA. 2004. Tangling effect in fibrillated cellulose reinforced nanocomposites. Macromolecules37(11):4313–4316.
78. Salas, C, Nypelö T., Abreu C. R., Carrillo C., and RojasR. 2014. Nanocellulose properties and applications in colloids and interfaces. Curr. Opin. Colloid Interface Sci., 19:383–396
79. Serrano, E. 2004. A numerical study of the shear-strength-predicting capabilities of test specimens for wood–adhesive bonds. Int. J. Adhes. Adhes. 24(1):23–35.
80. Shirmohammadi, M. and LeggateW. 2021. Review of existing methods for evaluating adhesive bonds in timber products. Eng. Wood Prod. Construct. 30. https://doi.org/10.5772/intechopen.99237
81. Singha, A. S. and ThakurV. K. 2008. Fabrication and study of lignocellulosic hibiscus sabdariffa fiber reinforced polymer composites. BioResources3(4):1173–1186.
82. Somvanshi, K. S., Gope P. C., and TiwariS. A review on properties of nano biocomposite film for packaging applications from cellulose nano fiber. International Journal of Engineering Research and Applications. 11(1):29–39.
83. Tabarsa, T., Jahanshahi S., and AshoriA. 2011. Mechanical and physical properties of wheat straw boards bonded with a tannin modified phenol–formaldehyde adhesive. Compos. B Eng. 42(2):176–180.
84. Veigel, S., Müller U., Keckes J., Obersriebnig M., and Gindl-AltmutterW. 2011. Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds. Cellulose18:1227–1237.
85. Veigel, S., Rathke J., Weigl M., and Gindl-AltmutterW. 2012. Particle board and oriented strand board prepared with nanocellulose-reinforced adhesive. J. Nanomater. 2012:1–8.
86. Vick, C. B. 1999. Adhesive bonding of wood materials. İn: Wood-Hand Book—Wood As An Enginering Material. Forest Prod. Lab. Rep. GTR-113. USDA Forest Service, Forest Products Laboratory, Madison, Wisconsin. pp. 9.1–9.24.
87. Vineeth, S. K., Gadhave R. V., and GadekarP. T. 2019. Nanocellulose applications in wood adhesives. Open J. Polym. Chem. 9(4):63–75.
88. Wang, S. and XingC.,inventors; University of Tennessee Research Foundation, assignee. 2016. Wood adhesives containing reinforced additives for structural engineering products. U.S. Patent9,284,474.
89. Wessels, C. B., Nocetti M., Brunetti M., Crafford P. L., Pröller M., Dugmore M. K., … and NaghizadehZ. 2020. Green-glued engineered products from fast growing Eucalyptus trees: A review. Eur. J. Wood Wood Prod. 78:933–940.
90. Wibowo, E. S., Lubis M. A. R., and ParkB. D. 2021. In-situ modification of low molar ratio urea–formaldehyde resins with cellulose nanofibrils for plywood. J. Adhes. Sci. Technol. 35(22):2452–2465.
91. Xing, D., Li J., Wang X., and WangS. 2016. In situ measurement of heat-treated wood cell wall at elevated temperature by nanoindentation. Ind. Crops Prod. 87:142–149.
92. Yang, X. and FrazierC. E. 2016. Influence of organic fillers on surface tension of phenol-formaldehyde adhesives. Int. J. Adhes. Adhes. 66:160–166.
93. Yelle, D. J. and RalphJ. 2016. Characterizing phenol–formaldehyde adhesive cure chemistry within the wood cell wall. Int. J. Adhes. Adhes. 70:26–36.
94. Zhang, H., She Y., Song S., Lang Q., and PuJ. 2013. Particulate reinforcement and formaldehyde adsorption of modified nanocrystalline cellulose in urea-formaldehyde resin adhesive. J. Adhes. Sci. Technol. 27(9):1023–1031.
95. Zhang, J., Zhang Y., Li J., and GaoQ. 2019. Development of a high-performance adhesive with a microphase, separation crosslinking structure using wheat flour and a hydroxymethyl melamine prepolymer. Polymers11(5):893.
96. Zheng, Z. F., Zou J. C., Zhang H. J., and Ling,M. M. 2007. Study on liquefaction of walnut shell in phenol and application of its resinification product as wood adhesives. Chem. Ind. Forest Prod. 27(4):31–36.
97. Zimmermann, T., Pöhler E., and GeigerT. 2004. Cellulose fibrils for polymer reinforcement. Adv. Eng. Mater. 6(9):754–761.