Strength and Rigidity Performance of Laminated Members Using Small-Diameter Logs
Source abstract
Abstract
Abstract Korea and other countries have a high ratio of small-diameter logs in the harvested log volume. Hence, using these small-diameter logs as structural materials is an important issue. The lumber obtained from small-diameter logs generally has small cross-section dimensions and is mostly juvenile wood, resulting in inferior strength performance. In this research, a laminating process was developed for effective utilization of small-diameter logs as structural materials, and eight types of laminated beams and eight types of laminated columns were manufactured by the vertical and horizontal laminations with square cross-section timber. The laminated members were composed of laminated square timber obtained from small-diameter logs and were reinforced by square timber or lamina obtained from large-diameter logs. The laminated members were evaluated for their bending and axial compression performance. As a result, the beam exhibited an increase in bending Young's modulus of 63 percent and bending strength of 77 percent. Additionally, the column's axial compression performance indicated a positive effect on compression Young's modulus, where a 158 percent increase was found. Furthermore, when Johnson's equation was used to determine the critical stress, the value was close to the yield stress. In contrast, Euler's equation led to overestimation of the capacity as the slenderness ratio became smaller, which indicated that the application of Johnson's equation may be preferable. Therefore, a combination of small-diameter logs and large-diameter logs provided increased strength and rigidity performance, indicating the possibility of an effective use of small-diameter logs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Wood Treatment and Properties · Tree Root and Stability Studies · Forest ecology and management
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. ASTM International. 2009. Standard test methods of static tests of lumber in structural sizes. ASTM D198. ASTM International, West Conshohocken, Pennsylvania.
2. Cha, J. K. 1996. Study on stress waves for development of glulam from domestic small diameter log (II)—Static bending properties of glulam member. J. Korean Wood Sci. Technol. 24(4):7–14.
3. Green, D. W., T. M. Gorman, J. W. Evans, J. F. Murphy, and C. A. Hatfield. 2008. Grading and properties of small-diameter Douglas-fir and ponderosa pine tapered logs. Forest Prod. J. 58(11):33–41.
4. Green, D. W., E. C. Lowell, and R. Hernandez. 2005. Structural lumber from dense stands of small-diameter Douglas-fir trees. Forest Prod. J. 55(7/8):42–50.
5. Hirashima, Y., S. Oshiumi, A. Inoue, Y. Ono, and K. Komatsu. 1988. Bending strength of glued-timber beams built-up from square timbers. Mokuzai Kogyo43(2):14–19. (In Japanese.)
6. Ishiguri, F., J. Eisawa, Y. Saito, K. Iizuka, S. Yokota, and N. Yoshizawa. 2006. Comparison of wood properties of Hinoki (Chamaecyparis obsta) small diameter logs collected from different tree ages and heights. Mokuzai Gakkaishi. 52(6):383–388. (In Japanese.)
7. Korea Forest Service. 2015. Statistical Yearbook of Forestry. Korea Forest Service, Daejeon. pp. 286, 332–333. (In Korean.)
8. Korea Forest Service and Korea Forestry Promotion Institute. 2013. Assessment of the Korea's Forest Resources. Korea Forestry Promotion Institute, Seoul. pp. 94, 254. (In Korean.)
9. Korean Standards Association. 2010. Structural glued laminated timber. KS F 3021. Korean Standards Association, Seoul. (In Korean.)
10. Langum, C. E., V. Yadama, and E. C. Lowell. 2009. Physical and mechanical properties of young-growth Douglas-fir and western hemlock from western Washington. Forest Prod. J. 59(11/12):37–47.
11. Lee, C. T. and S. C. Kim. 1990. A study on sawing and utilization structure of lumber from small-diameter logs of Larix leptolepis. J. Korean Wood Sci. Technol. 18(3):53–68. (In Korean.)
12. Mott. R. L. 2007. Applied Strength of Materials. 5th ed. CRC Press, Boca Raton, Florida. 611pp.
13. Park, J. C. and S. I. Hong. 2003. Bending strength assessment of Larix logs by nondestructive evaluation techniques. J. Korean Forest Soc. 22(2):60–68. (In Korean.)
14. Yoshida, T., Y. Itoh, and T. Hashizume. 2005. Fabrication of a vertically laminated beam composed of two Japanese larch beams and its bending strength. Mokuzai Kogyo60(2):65–69. (In Japanese.)