High-Performance Formaldehyde-Free Lignin Adhesives from Sugarcane Bagasse via Epoxy Cross-Linking
Source abstract
Abstract
Abstract Lignin derived from sugarcane bagasse presents a sustainable and completely formaldehyde-free alternative to conventional wood adhesives. In this study, a water-based epoxy modification strategy was developed to construct a three-dimensional cross-linked network, supported by a two-stage orthogonal design to optimize reaction parameters. The resulting adhesive achieved a bonding strength of 2.72 ± 0.15 MPa—3.9 times higher than the national standard—while the activation energy for thermal decomposition increased by 64.5 percent (162.4 ± 5.6 kJ/mol). Scanning electron microscopy revealed a dense, compact morphology in heat-dried films, correlating with >90 percent wood failure rates (within the wood substrate itself, rather than at the adhesive–wood interface), whereas freeze-dried samples exhibited a porous network structure with reduced cohesion. X-ray diffraction and thermogravimetric/derivative thermogravimetric analyses confirmed the thermal–mechanical reinforcement effect of epoxy cross-linking, with the optimized adhesive maintaining 78.5 percent mass retention after 72 hours of aging at 300°C. Importantly, the adhesive was synthesized entirely from formaldehyde-free raw materials, and the trace-level formaldehyde emissions of particleboards (0.02 mg/liter) are attributed to the natural background of wood rather than the adhesive itself, fully complying with Enropean Norm Formaldehyde(ENF)standards. This work offers a scalable route to transform agricultural waste into high-performance, formaldehyde-free wood adhesives, delivering both environmental and industrial benefits.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Lignin and Wood Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The authors are, respectively, Lecturer, Guangxi Sci. & Technol. Normal Univ., Laibin, Guangxi, China (2064398960@qq.com [corresponding author]); Research Associate,Guilin Univ. of Technol. at Nanning, Guangxi, China; and Associate professor, Guangxi Sci. & Technol. Normal Univ., Laibin, Guangxi, China.
References (62)
Show source-provided references
1. Aldroubi, S., El-Sakhawy M., Kamel S., Hesemann P., Mehdi A., and Brun N. 2023. Ionothermal carbonization of sugarcane bagasse in imidazolium tetrachloroferrate ionic liquids: Effect of the cation on textural and morphological properties. Green Chem. 25(9):3533–3542. https://doi.org/10.1039/D3GC00300K
2. Amiripour, F., Ghasemi S., and Chaichi M. J. 2024. Nanostructured rhodamine B/aluminosilicate extracted sugarcane bagasse modified with tobacco-derived carbon quantum dot as ratiometric fluorescence probe for determination of tetracycline. Talanta 276:126158. https://doi.org/10.1016/j.talanta.2024.126158
3. ASTM 1998: ASTM D905-98. Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading. ASTM International, West Conshohocken, PA, 1998.
4. ASTM 2001. ASTM D906-98 (Reapproved 2001). Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction by Shear in Tension Loading. ASTM International, West Conshohocken, PA, 2001.
5. ASTM 2007: ASTM D5751-99 (Reapproved 2007). Standard Practice for Evaluating Performance of Structural Wood Adhesives for Use Under Exterior Exposure Conditions. ASTM International, West Conshohocken, PA, 2007.
6. Buarque, F. S., Souza C. E. C. D., Ferreira R. M., Sabino T. O., Teixeira O. M. J., Bandeira L. F. M., Fraga A. C., Coelho M. A. Z., and Ribeiro B. D. 2024. Dissolution and enzymatic hydrolysis of sugarcane bagasse using ionic liquids and deep eutectic solvents. Process Biochem. 147:257–267. https://doi.org/10.1016/j.procbio.2024.08.024
7. Castanheira, J. D. P., Llanos J. H. R., Martins J. R., Costa M. L., and Brienzo M. 2025. Acetylated xylan from sugarcane bagasse: Advancing bioplastic formation with enhanced water resistance. Polym. Bull. 82(5):1705–1722. https://doi.org/10.1007/s00289-024-05597-z
8. Chen, Y. X., Zhu H. S., Gao F., Xiong H. R., Yang H., Xu Z. X., Duan P. G., Zheng L. J., Osman S. M., and Luque R. 2024. Green wood bio-adhesives from cellulose-derived bamboo powder hydrochars. Chem. Eng. J. 498:155667. https://doi.org/10.1016/j.cej.2024.155667
9. Cheon, H., Kim J. H., Kim J. S., and Park J. B. 2024. Valorization of single-carbon chemicals by using carboligases as key enzymes. Curr. Opin. Biotechnol. 85:103047. https://doi.org/10.1016/j.copbio.2023.103047
10. Cho, S. H., Park J., Lee D., Cho H., Lee J., and Kwon E. E. 2024. Recovery of gaseous fuels through CO2-mediated pyrolysis of thermosetting polymer waste. Chemosphere 363:142892. https://doi.org/10.1016/j.chemosphere.2024.142892
11. Du, Y., Zhu Y., Li, J., Li Y., and Xiao J. 2024. Multifunctional superhydrophobic sugarcane bagasse capable of efficiently separating oil–water mixtures and degrading MB. Int. J. Biol. Macromol. 283(Pt.1):137386. https://doi.org/10.1016/j.ijbiomac.2024.137386
12. Ghahri, S., Wibowo E. S., and Park B. D. 2024. Crosslinking reactions of a model aminated lignin compound as a platform for building thermosetting polymers for lignin-based bio adhesives. Bioresour. Technol. 413:131500. https://doi.org/10.1016/j.biortech.2024.131500
13. He, Y., Liu T., and Deng Y. 2025. Enhanced norfloxacin removal by eco-friendly MgFe2O4 modified sugarcane bagasse biochar: Adsorption performances and mechanisms. New J. Chem. 49(9):3783–3794. https://doi.org/10.1039/D4NJ05076B
14. ISO 2008: ISO 291:2008. Plastics — Standard Atmospheres for Conditioning and Testing. International Organization for Standardization, Geneva, Switzerland, 2008.
15. Lin, Y. R., Zheng M. W., and Liu S. H. 2023. Silica wastes derived multifunctional coatings for formaldehyde photodegradation and autonomous indoor humidity buffering. Chemosphere 341:140118. https://doi.org/10.1016/j.chemosphere.2023.140118
16. Lubis, M. A. R., Falah F., Harini D., Sudarmanto, A. Kharisma, Tjahyono B., Fatriasari W., Subiyanto B., Suryanegara L., and Iswanto A. H. 2023. Enhancing the performance of natural rubber latex with polymeric isocyanate as cold-pressing and formaldehyde free adhesive for plywood. J. Adhes. 9(1–4):58–73. https://doi.org/10.1080/00218464.2021.1999233
17. Mauri, S., Calligaro R., Pauletti C. F., Camellone M. F., Boaro M., Braglia L., Fabris S., Piccinin S., Torelli P., and Trovarelli A. 2024. Low-temperature methane activation reaction pathways over mechanochemically-generated Ce4+/Cu interfacial sites. Small 20(42):2403028. https://doi.org/10.1002/smll.202403028
18. Meng, T., Ding Y., Liu Y., Xu L., Mao Y., Gelfond J., Li S., Li Z., Salipante P. F., Kim H., Zhu J. Y., Pan X., and Hu L. 2023. In situ lignin adhesion for high-performance bamboo composites. Nano Lett. 23(18):8411–8418. https://doi.org/10.1021/acs.nanolett.3c01497
19. Pan, J., Li Y., and Zhang M. 2024. Bio-based Epoxy Resin Systems Derived from Lignin for Sustainable Wood Adhesives. Industrial Crops and Products, 215, 118908.
20. Siahkamari, M., Debnath D., Wang T., and Nejad M. 2025. A fundamental study of lignin reactions with formaldehyde and glyoxal. Green Chem. 27(8):2342–2358. https://doi.org/10.1039/d4gc05695g
21. Soliman, M., Wageed M., Alsherbeny S., Safty S., Su Y., Ali A. M., and Sayed R. 2022. Sugarcane bagasse as low-cost solid-phase extraction sorbent for pesticides in water. Int. J. Environ. Anal. Chem. 104(18):6324–6338. https://doi.org/10.1080/03067319.2022.2142048
22. Song, G., Liu D., Madadi M., Liu L., Li C., Liu Q., Sun C., Zhang E., Ashori A., and Sun F. 2025. Surfactant-aided acid glycerol pretreatment of sugarcane bagasse: Dual benefits of substrate and lignin modifications for improved enzymatic hydrolysis. Energy 320:135520. https://doi.org/10.1016/j.energy.2025.135520
23. Standardization Administration of China. 2004. GB/T 9846-2004. Plywood for general use. Beijing, China.
24. Standardization Administration of China 2013; Standardization Administration of China. (2013). GB/T 9846-2013: Plywood. Beijing: Standards Press of China.
25. Sunar, S. L., Bhattacharyya D., Shee D., and Panda T. K. 2025. Efficient fractionation of sugarcane bagasse to bio-based building blocks using a tailored deep eutectic solvent and process optimization. Waste Biomass Valorization. Published online 24 March 2025. https://doi.org/10.1007/s12649-025-03019-3
26. Xu, Z. X., Xiong H. R., Dou R., Tan Y., Chen Y. X., and Leng L. J. 2024. Hydrochar-based facile and green wood bio-adhesives production from distilled spent grain. Chem. Eng. J. 481:148694. https://doi.org/10.1016/j.cej.2024.148694
27. Yue, Z., Lu G., Wei W., Huang Y., Chen Z., Dingwall F., Shao S., and Fan X. 2024. Engineered half-unit-cell MoS2/ZnIn2S4 monolayer photocatalysts and adsorbed hydroxyl radicals-assisted activation of Cα-H bond for efficient Cβ-O bond cleavage in lignin to aromatic monomers. ACS Appl. Mater. Interfaces 16(36):47724–47740. https://doi.org/10.1021/acsami.4c10515
28. Zhang, X., Long C., Zhu X., Zhang X., Li J., Luo J., Li J., and Gao Q. 2023. Preparation of strong and thermally conductive, spider silk-inspired, soybean protein-based adhesive for thermally conductive wood-based composites. ACS Nano 17(19):18850–18863. https://doi.org/10.1021/acsnano.3c03782
29. Zhao, H., Yao W., Liu G., Wang J., Li J., and Gao Q. 2024. A new strategy for the preparation of high‐strength hydrophobic aldehyde‐free starch adhesive. Polym. Adv. Technol. 35(12):e7000–e7011. https://doi.org/10.1002/pat.70000
30. Zhao, J., Wang H., Kan Y., Liu G., Wang J., Li J., and Gao Q. 2025. A synergistic strategy for cost‐effectively reducing formaldehyde emission of urea‐formaldehyde resin via glyoxal copolymerization and urea post‐addition. J. Appl. Polym. Sci. 142(16):e56750. https://doi.org/10.1002/app.56750
31. Zuo, H., and Liu Z. 2023. Thermal and structural analysis of the reaction mechanisms during the preparation of activated carbon from sugarcane bagasse by urea phosphate activation. Cellulose 31(2):793–808. https://doi.org/10.1007/s10570-023-05622-w
32. Aldroubi, S., El-Sakhawy M., Kamel S., Hesemann P., Mehdi A., and Brun N. 2023. Ionothermal carbonization of sugarcane bagasse in imidazolium tetrachloroferrate ionic liquids: Effect of the cation on textural and morphological properties. Green Chem. 25(9):3533–3542. https://doi.org/10.1039/D3GC00300K
33. Amiripour, F., Ghasemi S., and Chaichi M. J. 2024. Nanostructured rhodamine B/aluminosilicate extracted sugarcane bagasse modified with tobacco-derived carbon quantum dot as ratiometric fluorescence probe for determination of tetracycline. Talanta 276:126158. https://doi.org/10.1016/j.talanta.2024.126158
34. ASTM 1998: ASTM D905-98. Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading. ASTM International, West Conshohocken, PA, 1998.
35. ASTM 2001. ASTM D906-98 (Reapproved 2001). Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction by Shear in Tension Loading. ASTM International, West Conshohocken, PA, 2001.
36. ASTM 2007: ASTM D5751-99 (Reapproved 2007). Standard Practice for Evaluating Performance of Structural Wood Adhesives for Use Under Exterior Exposure Conditions. ASTM International, West Conshohocken, PA, 2007.
37. Buarque, F. S., Souza C. E. C. D., Ferreira R. M., Sabino T. O., Teixeira O. M. J., Bandeira L. F. M., Fraga A. C., Coelho M. A. Z., and Ribeiro B. D. 2024. Dissolution and enzymatic hydrolysis of sugarcane bagasse using ionic liquids and deep eutectic solvents. Process Biochem. 147:257–267. https://doi.org/10.1016/j.procbio.2024.08.024
38. Castanheira, J. D. P., Llanos J. H. R., Martins J. R., Costa M. L., and Brienzo M. 2025. Acetylated xylan from sugarcane bagasse: Advancing bioplastic formation with enhanced water resistance. Polym. Bull. 82(5):1705–1722. https://doi.org/10.1007/s00289-024-05597-z
39. Chen, Y. X., Zhu H. S., Gao F., Xiong H. R., Yang H., Xu Z. X., Duan P. G., Zheng L. J., Osman S. M., and Luque R. 2024. Green wood bio-adhesives from cellulose-derived bamboo powder hydrochars. Chem. Eng. J. 498:155667. https://doi.org/10.1016/j.cej.2024.155667
40. Cheon, H., Kim J. H., Kim J. S., and Park J. B. 2024. Valorization of single-carbon chemicals by using carboligases as key enzymes. Curr. Opin. Biotechnol. 85:103047. https://doi.org/10.1016/j.copbio.2023.103047
41. Cho, S. H., Park J., Lee D., Cho H., Lee J., and Kwon E. E. 2024. Recovery of gaseous fuels through CO2-mediated pyrolysis of thermosetting polymer waste. Chemosphere 363:142892. https://doi.org/10.1016/j.chemosphere.2024.142892
42. Du, Y., Zhu Y., Li, J., Li Y., and Xiao J. 2024. Multifunctional superhydrophobic sugarcane bagasse capable of efficiently separating oil–water mixtures and degrading MB. Int. J. Biol. Macromol. 283(Pt.1):137386. https://doi.org/10.1016/j.ijbiomac.2024.137386
43. Ghahri, S., Wibowo E. S., and Park B. D. 2024. Crosslinking reactions of a model aminated lignin compound as a platform for building thermosetting polymers for lignin-based bio adhesives. Bioresour. Technol. 413:131500. https://doi.org/10.1016/j.biortech.2024.131500
44. He, Y., Liu T., and Deng Y. 2025. Enhanced norfloxacin removal by eco-friendly MgFe2O4 modified sugarcane bagasse biochar: Adsorption performances and mechanisms. New J. Chem. 49(9):3783–3794. https://doi.org/10.1039/D4NJ05076B
45. ISO 2008: ISO 291:2008. Plastics — Standard Atmospheres for Conditioning and Testing. International Organization for Standardization, Geneva, Switzerland, 2008.
46. Lin, Y. R., Zheng M. W., and Liu S. H. 2023. Silica wastes derived multifunctional coatings for formaldehyde photodegradation and autonomous indoor humidity buffering. Chemosphere 341:140118. https://doi.org/10.1016/j.chemosphere.2023.140118
47. Lubis, M. A. R., Falah F., Harini D., Sudarmanto, A. Kharisma, Tjahyono B., Fatriasari W., Subiyanto B., Suryanegara L., and Iswanto A. H. 2023. Enhancing the performance of natural rubber latex with polymeric isocyanate as cold-pressing and formaldehyde free adhesive for plywood. J. Adhes. 9(1–4):58–73. https://doi.org/10.1080/00218464.2021.1999233
48. Mauri, S., Calligaro R., Pauletti C. F., Camellone M. F., Boaro M., Braglia L., Fabris S., Piccinin S., Torelli P., and Trovarelli A. 2024. Low-temperature methane activation reaction pathways over mechanochemically-generated Ce4+/Cu interfacial sites. Small 20(42):2403028. https://doi.org/10.1002/smll.202403028
49. Meng, T., Ding Y., Liu Y., Xu L., Mao Y., Gelfond J., Li S., Li Z., Salipante P. F., Kim H., Zhu J. Y., Pan X., and Hu L. 2023. In situ lignin adhesion for high-performance bamboo composites. Nano Lett. 23(18):8411–8418. https://doi.org/10.1021/acs.nanolett.3c01497
50. Pan, J., Li Y., and Zhang M. 2024. Bio-based Epoxy Resin Systems Derived from Lignin for Sustainable Wood Adhesives. Industrial Crops and Products, 215, 118908.
51. Siahkamari, M., Debnath D., Wang T., and Nejad M. 2025. A fundamental study of lignin reactions with formaldehyde and glyoxal. Green Chem. 27(8):2342–2358. https://doi.org/10.1039/d4gc05695g
52. Soliman, M., Wageed M., Alsherbeny S., Safty S., Su Y., Ali A. M., and Sayed R. 2022. Sugarcane bagasse as low-cost solid-phase extraction sorbent for pesticides in water. Int. J. Environ. Anal. Chem. 104(18):6324–6338. https://doi.org/10.1080/03067319.2022.2142048
53. Song, G., Liu D., Madadi M., Liu L., Li C., Liu Q., Sun C., Zhang E., Ashori A., and Sun F. 2025. Surfactant-aided acid glycerol pretreatment of sugarcane bagasse: Dual benefits of substrate and lignin modifications for improved enzymatic hydrolysis. Energy 320:135520. https://doi.org/10.1016/j.energy.2025.135520
54. Standardization Administration of China. 2004. GB/T 9846-2004. Plywood for general use. Beijing, China.
55. Standardization Administration of China 2013; Standardization Administration of China. (2013). GB/T 9846-2013: Plywood. Beijing: Standards Press of China.
56. Sunar, S. L., Bhattacharyya D., Shee D., and Panda T. K. 2025. Efficient fractionation of sugarcane bagasse to bio-based building blocks using a tailored deep eutectic solvent and process optimization. Waste Biomass Valorization. Published online 24 March 2025. https://doi.org/10.1007/s12649-025-03019-3
57. Xu, Z. X., Xiong H. R., Dou R., Tan Y., Chen Y. X., and Leng L. J. 2024. Hydrochar-based facile and green wood bio-adhesives production from distilled spent grain. Chem. Eng. J. 481:148694. https://doi.org/10.1016/j.cej.2024.148694
58. Yue, Z., Lu G., Wei W., Huang Y., Chen Z., Dingwall F., Shao S., and Fan X. 2024. Engineered half-unit-cell MoS2/ZnIn2S4 monolayer photocatalysts and adsorbed hydroxyl radicals-assisted activation of Cα-H bond for efficient Cβ-O bond cleavage in lignin to aromatic monomers. ACS Appl. Mater. Interfaces 16(36):47724–47740. https://doi.org/10.1021/acsami.4c10515
59. Zhang, X., Long C., Zhu X., Zhang X., Li J., Luo J., Li J., and Gao Q. 2023. Preparation of strong and thermally conductive, spider silk-inspired, soybean protein-based adhesive for thermally conductive wood-based composites. ACS Nano 17(19):18850–18863. https://doi.org/10.1021/acsnano.3c03782
60. Zhao, H., Yao W., Liu G., Wang J., Li J., and Gao Q. 2024. A new strategy for the preparation of high‐strength hydrophobic aldehyde‐free starch adhesive. Polym. Adv. Technol. 35(12):e7000–e7011. https://doi.org/10.1002/pat.70000
61. Zhao, J., Wang H., Kan Y., Liu G., Wang J., Li J., and Gao Q. 2025. A synergistic strategy for cost‐effectively reducing formaldehyde emission of urea‐formaldehyde resin via glyoxal copolymerization and urea post‐addition. J. Appl. Polym. Sci. 142(16):e56750. https://doi.org/10.1002/app.56750
62. Zuo, H., and Liu Z. 2023. Thermal and structural analysis of the reaction mechanisms during the preparation of activated carbon from sugarcane bagasse by urea phosphate activation. Cellulose 31(2):793–808. https://doi.org/10.1007/s10570-023-05622-w