journal article·2016-04

Effect of Vibration Properties of a Resonance Board on Piano Timbre

Yuanyuan Miao, Zhenbo Liu, Yixing Liu, Jun Shen

Forest Products Journal· Volume 66· Issue 1-2
Publisher page

Abstract

Abstract The resonance board is one of the most important components of a piano and greatly affects the piano's timbre. The vibration properties of eight resonance boards made from Picea glehnii, Picea jezoensis, Picea spinulosa, and Picea sitchensis were analyzed using the spectrum analysis method of the fast Fourier transform following vibration theory. The modulus of elasticity (E) and velocity of vibration transmission (C) of each resonance board were calculated. After the resonance boards were incorporated into pianos, the mean amplitude, ratio of maximum to minimum amplitudes, and mean ratio of successive amplitudes of resonant frequencies for 36 typical keys of each piano were obtained from the frequency spectrum. The correlation between a piano's timbre and the resonance board's vibration properties was analyzed. The results show that the piano timbre improves with increasing E and C, especially in the y direction of the resonance board.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Music Technology and Sound Studies · Music and Audio Processing · Structural Engineering and Vibration Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Adrien, M. M., J. Frelat, and C. Besnainou. 2008. Numerical simulation of a piano soundboard under downbearing. J. Acoust. Soc. Am. 123:2401–2406.
2. Alfredson, R. J. 1978. Fourier transform methods for analysing the sounds of a piano. Acustica39:130–132.
3. Bensa, J., O. Gipouloux, and K. M. Richard. 2005. Parameter fitting for piano sound synthesis by physical modeling. J. Acoust. Soc. Am. 118:495–504.
4. Berthaut, J., M. N. Ichchou, and L. Jezequel. 2003. Piano soundboard: Structural behavior, numerical and experimental study in the modal range. Appl. Acoust. 64:1113–1136.
5. Giordano, N. 1997. Simple model of a piano soundboard. J. Acoust. Soc. Am. 102:1159–1168.
6. Giordano, N. 1998 a. Mechanical impedance of a piano soundboard. J. Acoust. Soc. Am. 103:2128–2133.
7. Giordano, N. 1998 b. Sound production by a vibrating piano soundboard: Experiment. J. Acoust. Soc. Am. 104:1648–1653.
8. Giordano, N. and M. Jiang. 2004. Physical modeling of the piano. EURASIP J. Appl. Signal Process. 7:926–933.
9. Haines, D. W., J. M. Leban, and C. Herbe. 1996. Determination of Young's modulus for spruce, fir and isotropic materials by the resonance flexure method with comparisons to static flexure and other dynamic methods. Wood Sci. Technol. 30:253–263.
10. Han, B. Q. 2002. Discussion on the property of tones. Musicol. China67:27–36. (In Chinese.)
11. Han, B. Q. 2003. The Being of Tone—An Introduction to Musical Acoustics. China Federation of Literature Publishing House, Beijing. pp. 63–67. (In Chinese.)
12. Hearmon, R. F. S. 1961. An Introduction to Applied Anisotropic Elasticity. Oxford University Press, London. pp. 90–109.
13. Huang, T. Q. and Z. W. Xie. 2005. Study on the effect of the 7th and 9th harmonics of piano amplitude spectrum on piano tone quality. Audio Eng. 4:4–7. (In Chinese.)
14. Jin, X. B. 2002. Discussion of piano tone (I). Musical Instrument1:38–39. (In Chinese.)
15. Kubojima, Y., H. Yoshihara, M. Ohta, and T. Okano. 1996. Examination of the method of measuring the shear modulus of wood based on the Timoshenko's theory of bending. Mokuzai Gakkaishi42:1170–1176.
16. Kubojima, Y., H. Yoshihara, M. Ohta, and T. Okano. 1997. Accuracy of the shear modulus of wood obtained by Timoshenko's theory of bending. Mokuzai Gakkaishi43:439–443.
17. Liang, Z. Q. and Z. W. Xie. 2005. Analysis of inharmonic partials in the piano sound spectrum. Audio Eng. 3:4–6. (In Chinese.)
18. Liu, Y. X. 2004. Wood Science. China Forestry Publishing House, Beijing. pp. 158–168. (In Chinese.)
19. Liu, Z. B., Y. X. Liu, Y. T. Miao, and J. Shen. 2009 a. Relationship between vibration property of resonance board and subjective evaluation of piano acoustical quality. Sci. Silvae Sinicae45(4):100–106. (In Chinese.)
20. Liu, Z. B., Y. X. Liu, J. Shen, and M. Liu. 2009 b. Effect of ribs on vibration transmission of piano soundboard. J. Northeast Forestry Univ. 37(8):44–45. (In Chinese.)
21. Liu, Z. B., Y. X. Liu, J. Shen, and Y. Y. Miao. 2008. Vibration properties of piano resonance board from spruce wood. J. Beijing Forestry Univ. 30:129–133. (In Chinese.)
22. Liu, Z. B., Y. X. Liu, H. P. Yu, and J. Q. Yuan. 2005. Research on the dynamic modulus of elasticity measurement of lumber. Sci. Silvae Sinicae41:126–131. (In Chinese.)
23. Liu, Z. B., J. Shen, Y. X. Liu, M. Liu, H. J. Zhang, and J. H. Shang. 2007. Acoustic vibration property of full-size spruce wood soundboard of musical instruments. Sci. Silvae Sinicae43:100–105. (In Chinese.)
24. Matsunaga, M., M. Sugiyama, K. Minato, and M. Norimoto. 1996. Physical and mechanical properties required for violin bow materials. Holzforschung50:511–517.
25. Moore, T. R. and S. A. Zietlow. 2006. Interferometric studies of a piano soundboard. J. Acoust. Soc. Am. 119:1783–1793.
26. Nakao, T. 1996. Experimental study of torsional vibration of wooden bars by plate theories. Mokuzai Gakkaishi42:10–15.
27. Nakao, T., T. Okano, and I. Asano. 1985. Vibrational properties of a wooden plate. Mokuzai Gakkaishi31:793–800.
28. Nishiguchi, I. 2004. Recent research on the acoustics of pianos. Acoust. Sci. Technol. 25:413–418.
29. Rossing, T. D. and N. H. Fletcher. 2004. Principles of Vibration and Sound. 2nd ed. Springer-Verlag, New York. 71pp.
30. Rujinirun, C., P. Phinyocheep, W. Prachyabrued, and N. Laemsak. 2005. Chemical treatment of wood for musical instruments. Part I: Acoustically important properties of wood for the Ranad (Thai traditional xylophone). Wood Sci. Technol. 39:77–85.
31. Shen, J. 2006. Relationships between longitudinal and radial Picea genera sound vibration parameters. Front. Forestry China1:431–437.
32. Sobue, N. 1986. Measurement of Young's modulus by the transient longitudinal vibration of wooden beams using a fast Fourier transformation spectrum analyzer. Mokuzai Gakkaishi32:744–747.
33. Sobue, N. and A. Katoh. 1992. Simultaneous determination of orthotropic elastic constants of standard full-size plywoods by vibration method. Mokuzai Gakkaishi31:895–902.
34. Sobue, N. and M. Kitazumi. 1991. Identification of power spectrum peaks of vibrating completely-free wood plates and moduli of elasticity measurements. Mokuzai Gakkaishi37:9–15.
35. Suzuki, H. 1986. Vibration and sound radiation of a piano soundboard. J. Acoust. Soc. Am. 80:1573–1582.
36. Tonosaki, M., T. Okano, and I. Asano. 1985. Measurement of plate vibration as a testing method of wood for musical instruments. Mokuzai Gakkaishi31:152–156. (In Japanese.)