journal article·2015-03

Manufacturing Medium-Density Particleboards from Wood–Bark Mixture and Different Adhesive Systems*

Xiang-Ming Wang, Haixia Fang, Martin Feng, Yaolin Zhang, Ning Yan

Forest Products Journal· Volume 65· Issue 1-2
Publisher page

Abstract

Abstract The disposal problem of bark residues and the shortage of wood raw material supply in some regions make the use of bark an attractive option for the industry. In this study, medium-density particleboards were manufactured from mixed black spruce bark and spruce-pine-fir wood particles at a weight ratio of 50/50. Different adhesive systems were used as binders for the bark-based panels, including commercial phenol-formaldehyde (PF), urea-formaldehyde (UF), polymeric methylene diphenyl diisocyanate (pMDI) resins, and a laboratory-synthesized lignin-PF resin containing 30 wt% lignin substitution for phenol. The objective was to investigate the suitability of utilizing bark residues in the manufacture of particleboards for the floor underlayment (PBU) application. The resulting boards were evaluated according to the ANSI A208.1‐2009 standard for internal bond (IB), modulus of rupture, modulus of elasticity, hardness, thickness swell, and linear expansion. The test results indicate that all panels made with these resin systems can meet the PBU requirements in terms of IB and hardness and that those bonded with 8 percent PF or 5 percent pMDI can meet all the requirements by the ANSI A208.1‐2009 standard for the floor underlayment application in terms of the properties evaluated. Results of this study imply that it is feasible to use bark as a raw material to manufacture medium-density particleboard for the floor underlayment application.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Wood Treatment and Properties · Lignin and Wood Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. American National Standards Institute. 2009. Particleboard. ANSI A208.1. Composite Panel Association, Leesburg, Virginia.
2. ASTM International. 2010. Standard test method for evaluating properties of wood-based fiber and particle panel materials. D1037‐06a. In:Annual Book of ASTM Standards. Vol. 04.10. ASTM International, West Conshohocken, Pennsylvania. pp. 110–139.
3. Blanchet, P., A. Cloutier, and B. Riedl. 2000. Particleboard made from hammer milled black spruce bark residues. Wood Sci. Technol. 34:11–19.
4. Blanchet, P., A. Cloutier, and B. Riedl. 2008. Bark particleboard: Pressing time, particle geometry and melamine overly. The Forestry Chronicle84(2):244–250.
5. Chen, S., C. Dai, and R. Wellwood. 2010. Effect of panel density on major properties of oriented strandboard. Wood Fiber Sci. 42(2):177–184.
6. Chow, S. 1975. Bark board without synthetic resins. Forest Prod. J. 25(11):32–37.
7. Gupta, G., N. Yan, and M. W. Feng. 2011. Effects of pressing temperature and particle size on bark board properties made from beetle-infested Lodgepole Pine (Pinus contorta) barks. Forest Prod. J. 61(6):478–488.
8. Harkin, J. M. and J. W. Rowe. 1971. Bark and its possible uses. Research Note FPL 091:56. USDA Forest Service, Forest Products Laboratory, Madison, Wisconsin. 56 pp.
9. Kiaei, M. 2011. Variability of fiber length in wood and bark in Acer velutinum Boiss. World Appl. Sci. J. 13(5):993–995.
10. Maloney, T. M. 1973. Bark boards from four west coast softwood species. Forest Prod. J. 23(8):30–38.
11. Ngueho Yemele, M. C., A. Cloutier, P. N. Diouf, A. Koubaa, P. Blanchet, and T. Stevanovic. 2008. Physical and mechanical properties of particleboard made from extracted black spruce and trembling aspen bark. Forest Prod. J. 58(10):38–46.
12. Pedieu, R., B. Riedl, and A. Pichette. 2009. Properties of mixed particleboards based on white birch (Betula papyrifera) inner bark particles and reinforced with wood fibres. Eur. J. Wood Prod. 67:95–101.
13. Place, T. A. and T. M. Maloney. 1977. Internal bond and moisture response properties of three-layer, wood-bark boards. Forest Prod. J. 27(3):50–54.
14. Xing, C., J. Deng, S. Y. Zhang, B. Riedl, and A. Cloutier. 2006 a. Impact of bark content on the properties of medium density fiberboard (MDF) in four species grown in eastern Canada. Forest Prod. J. 56(3):64–69.
15. Xing, C., J. Deng, S. Y. Zhang, B. Riedl, and A. Cloutier. 2006 b. Properties of MDF from black spruce tops as affected by thermomechanical refining conditions. Holz Roh- Werkst. 64:507–512.
16. Xing, C., T. Zhang, J. Deng, and S. Wang. 2007. Investigation of the effects of bark fiber as core material and its resin content on three-layer MDF performance by response surface methodology. Wood Sci. Technol. 41(7):585–595.