Process Parameter Investigations on Poplar Wooden Brick for Indoor Partition Wall
Source abstract
Abstract
Abstract Green building materials made from waste wood fiber have attracted worldwide attention. Poplar wood fiber can be molded into indoor partition wall brick with calcium hydroxide. The best process parameters are studied by single and multifactor methods. Compressive strength increases with the decreasing poplar wood fiber content and increasing calcium hydroxide content. The best process is 310 g of poplar wood fiber, 1,849 g of calcium hydroxide, and 10 minutes of cold press time. The mass proportion of poplar wood fiber and calcium hydroxide is 14:86. Compressive strength is affected extremely significantly by the interaction of poplar wood fiber mass, calcium hydroxide mass, and cold press time. It is affected significantly by the interaction between the calcium hydroxide mass and cold press time. The results are important to effectively use poplar wood fiber.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Innovations in Concrete and Construction Materials · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Arsenović, M., Radojević, Z. Jakšić, Ž. and Pezo.L. 2015. Mathematical approach to application of industrial wastes in clay brick production—Part II: Optimization.Ceram. Int. 41: 4899–4905.
2. Bories, C., Aouba, L. Vedrenne, E. and Vilarem.G. 2015. Fired clay bricks using agricultural biomass wastes: Study and characterization. Constr. Build.Mater. 91: 158–163.
3. Donkor, P. and Obonyo.E. 2015. Earthen construction materials: Assessing the feasibility of improving strength and deformability of compressed earth blocks using polypropylene fibers.Mater. Des. 83: 813–819.
4. El-Gamal, S. M. A. and Selim.F. A. 2017. Utilization of some industrial wastes for eco-friendly cement production.Sust. Mater. Technol. 12: 9–17.
5. Eliche-Quesada, D., Felipe-Sesé, M. A. López-Pérez, J. A. and Infantes Molina.A. 2017. Characterization and evaluation of rice husk ash and wood ash in sustainable clay matrix bricks.Ceram. Int. 43: 463–475.
6. Galán-Arboledas, R. J., Cotes-Palomino, M. T. Bueno, S. and Martínez-García.C. 2017. Evaluation of spent diatomite incorporation in clay-based materials for lightweight bricks processing. Constr. Build.Mater. 144: 327–337.
7. Gegu, C., Yajie, H. Feng, P. Jing, B. Mingfei, L. Chunli, Y. and Runcang.S. 2018. Fabrication of strong nanocomposite films with renewable forestry waste/montmorillonite/reduction of graphene oxide for fire retardant.Chem. Eng. J. 337: 436–445.
8. Jerman, M., Tydlitát, V. Keppert, M. Cáchová, M. and Cern.R. 2016. Characterization of early-age hydration processes in lime-ceramic binders using isothermal calorimetry, X-ray diffraction and scanning electron microscopy. Thermochim.Acta633: 108–115.
9. Jochem, D., Janzen, N. and Weimar.H. 2016. Estimation of own and cross price elasticities of demand for wood-based products and associated substitutes in the German construction sector. J. Clean.Prod. 137: 1216–1227.
10. Junfeng, W., Limin, P. Feng, F. and Dong.W. 2016. Study on the mechanical properties of sound-absorbing materials with wood fiber and polyester fiber.China Forest Prod. Ind. 43: 8–12.
11. Kong, Y., Xiucai, C. Leilei, W. Weidong, L. Li, W. Weiqing, L. and Chong.J. 2016. Effect of modification on mechanical property and fire-retardant behavior of fast-growing poplar wood.Combust. Sci. Technol. 22: 426–432.
12. Li, F., Weiren, X. and Chunyan.Z. 2016. Study on influence factors of bending performance of wood plastic composites.China Plast. Ind. 44: 93–95, 100.
13. Lin, L., Jiyu, Z. Yanfeng, H. Yan, H. Chang, C. and Guangqing.L. 2016. Impact of thermo-alkaline pretreatment on the anaerobic digestion of corn stover.J. B. J. Univ. Chem. Technol. (Nat. Sci. Edit. )43: 1–7.
14. Maleki, S., Najafi, S. K. Ebrahimi, G. and Ghofrani.M. 2017. Withdrawal resistance of screws in structural composite lumber made of poplar (Populus deltoides). Constr. Build.Mater. 142: 499–505.
15. Mao, A. and Shi.S. Q. 2012. Dynamic mechanical properties of polymeric diphenylmethane diisocyanate/bio-oil adhesive system.Forest Prod. J. 62: 201–206.
16. Masuka, S., Gwenzi, W. and Rukuni.T. 2018. Development, engineering properties and potential applications of unfired earth bricks reinforced by coal fly ash, lime and wood aggregates. J. Build.Eng. 18: 312–320.
17. Min, X., Yongbao, B. and Yongming.S. 2016. Preparation of poplar powder filled poly lactic acid composites material and application in 3D printing.Sci. Tech. Rev. 34: 132–137.
18. Minghua, Z. 2016. Modification of building template based on wood plastic composites.China Plast. Ind. 44: 130–133.
19. Nežerka, V., Antoš, J. Litoš, J. Tesárek, P. and Zeman.J. 2016. An integrated experimental–numerical study of the performance of lime-based mortars in masonry piers under eccentric loading. Constr. Build.Mater. 114: 913–924.
20. Nidzam, R. M., Norsalisma, I. and Mungai.K. J. 2016. Strength and environmental evaluation of stabilised clay-PFA eco-friendly bricks. Constr. Build.Mater. 125: 964–973.
21. Oskouei, A. V., Afzali, M. and Madadipour.M. 2017. Experimental investigation on mud bricks reinforced with natural additives under compressive and tensile tests. Constr. Build.Mater. 142: 137–147.
22. Peipei, T., Yawei, L. and Jie.L. 2016. Effect of lime on gelatinization of heat-treatment corn flour.Food Sci. Technol. 41: 186–189, 196.
23. Shengnan, A. and Xiaojun.M. 2017. Properties and structure of poly (3-hydroxybutyrate-co-4-hydroxybutyrate)/wood fiber biodegradable composites modified with maleic anhydride.Ind. Crop Prod. 109: 882–888.
24. Turgut, P. 2007. Cement composites with limestone dust and different grades of wood sawdust. Build.Environ. 42: 3801–3807.
25. Turgut, P. and Algin.H. M. 2007. Limestone dust and wood sawdust as brick material. Build.Environ. 42: 3399–3403.
26. Wan, H., Dahlen, J. Mao, A. Sites, L. Rowlen, A. Miller, G. McClendon, B. Liu, M. Liu, X. and Nicholas.D. 2017. Evaluation of the performance of composite wood decking bonded with phenol resorcinol formaldehyde and polyurethane adhesives after accelerated aging tests.Forest Prod. J. 67: 112–119.
27. Wang, Y., Liu, C. Zhao, R. McCord, J. Rials, T. and Wang.S. 2016. Anatomical characteristics, microfibril angle and micromechanical properties of cottonwood (Populus deltoides) and its hybrids.Biomass Bioenerg. 93: 72–77.
28. Xiaohong, Z., Yujia, Z. Fan, Z. Kai, Y. and Changhui.Y. 2016. Strength development of alkali-activated slag concrete by the addition of calcium hydroxide.Funct. Mater. 47: 8079–8083.
29. Xiaona, L., Zhijun, Z. Shun, T. Fengqiang, W. Yongming, S. Qingwen, W. and Charles.U. P. J. 2017. In line wood plastic composite pyrolyses and HZSM-5 conversion of the pyrolysis vapors.Energ. Convers. Manag. 141: 206–215.
30. Xiaoting, S., Qiheng, T. Liang, C. and Wenjing.G. 2016. Effects of cold crystallization on the properties of wood fiber/PLA bio-composites.J. N.J. Forest Univ. (Nat. Sci. Edit. )40: 137–142.
31. Yu, T., Xin, T. Junnan, Z. Xuwei, Z. Yanfang, F. and Qing.W. 2016. Hydrothermal solidification of discarded concrete and its mechanical strength.Chin. J. Environ. Eng. 10: 3805–3810.
32. Yuanhsiou, C., Pohsien, H. Bingyu, W. and Shangwen.C. 2015. A study on the color change benefits of sustainable green building materials. Constr. Build.Mater. 83: 1–6.
33. Yuanhsiou, C., Pohsien, H. Tsaifu, C. and Shangwen.C. 2016. A pilot study of the color performance of recycling green building materials. J. Build.Eng. 6: 86–92.
34. Yushuang, L., Demiao, C. Ying, L. and Jun.M. 2016. Flame retardant and anti-mold property of poplar treated with chitosan metal complex/N-P flame retardant.New Chem. Mater. 44: 246–248.
35. Zhiyi, H., Bin, W. Cheng, K. Kai, Z. and Ke.W. 2016. Flame retardant and pavement performance of composite hydroxide modified asphalt.J. Z. J. Univ. (Eng. Sci. )50: 27–32.